Worx WX520L.9 Manual

Worx Sav WX520L.9

Læs gratis den danske manual til Worx WX520L.9 (32 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Worx WX520L.9, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

20V Cordless Brushless Circular saw EN

Scie circulaire sans fil 20V sans brosse F

Sierra circular sin escobillas inalámbrica de 20V ES

P02

P13

P22

PRODUCT SAFETY

WARNING: Some dust created by power

sanding, sawing, grinding, drilling and

other construction activities contains chemicals

known to the state of California to cause cancer,

birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and

other masonry products;

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemical: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to filter out microscopic

particles.

WARNING: This product can expose you to

chemicals including lead and Di (2-ethylhexyl)

phthalate (DEHP) which are known to the State

of California to cause cancer and birth defects or

other reproductive harm. For more information go

to www.P65Warnings.ca.gov.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING Read all safety warnings, instructions,

illustrations and specifications provided with

this power tool.

Failure to follow all instructions listed

below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause

you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

Unmodified plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts.

Damaged or entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces

the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with

your finger on the switch or energising power tools

that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts.

Loose clothes, jewelry or long hair

can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of

dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become complacent

and ignore tool safety principles.

A careless

action can cause severe injury within a fraction of a

second.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct

power tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does not

Produkt Specifikationer

Mærke:	Worx
Kategori:	Sav
Model:	WX520L.9

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX520L.9 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Worx Manualer

Worx Nitro WX501 Manual

25 Februar 2025

Worx Nitro WX501.9 Manual

25 Februar 2025

Worx JawSaw WG321 Manual

3 Maj 2024

2 April 2024

9 Marts 2024

4 Marts 2024

1 Marts 2024

18 Februar 2024

9 December 2023

28 November 2023

Sav Manualer

Nyeste Sav Manualer

Dremel CS12V Manual

13 Juni 2025

Metabo BAS 505 Precision WNB Manual

9 Juni 2025

Mega 64000 Manual

9 Juni 2025

Metabo ST 18 LT 130 Manual

8 Juni 2025

Metabo STB 18 LT 130 Manual

8 Juni 2025

Metabo BAS 505 Precision DNB Manual

7 Juni 2025

Draper 70833 Manual

7 Juni 2025

Draper 83677 Manual

6 Juni 2025

Draper Storm Force 98445 Manual

6 Juni 2025

Draper Expert 57489 Manual

6 Juni 2025