Worx WX812 Manual

Worx Slibemaskine WX812

Læs gratis den danske manual til Worx WX812 (4 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Worx WX812, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Technical data

operating voltage: : 230 V AC +7/-5%

frequency: : 50 bis 60 Hz

power input: : max. 10 A

source 1 source 2

output voltage: : 0,005 .... 40 V 0, .... 40 V 005

output current: : 0,003 ....10,0 A 0, ....10,0 A 003

voltage stability with +7/ -5% mains fluctuation: : < 1 mV < 1 mV

load compensating with 100% load change: : 3 mV 3 mV

current stability with +6 / -10 % mains fluctuation: : 1 mA 1 mA

remaining ripple with nominal load: : ca. 2mVeff bzw. 4 mAef

ca. 2mVeff bzw. 4 mAef

mains fuse: : 2x 4,0A T 2x 4,0A T

acting voltage display: : LCD with 3½ digits LCD with 3½ digits

current display: LCD with 3½ digits LCD with 3½ digits

weight: : ca. 23 kg

dimensions (B x H x T): : 451 x 134 x 410 mm

site conditions

operating temperature area: : +10 °C bis +35 °C

Air humidity: : max. 85 %

air pressure: : 800 bis 1333 hPa

Statron Gerätetechnik GmbH

Ehrenfried-Jopp-Straße 59

15517 Fürstenwalde

Tel.: (03361) 37 21 01

Fax: (03361) 37 21 03

e-Mail : statron@statron.de

Internet: www.statron.de

Operating instruction lab

power supply unit

type 3262.1

The intended application of the power supply unit covers:

- link and operation of low-voltage consumers with an operating voltage between 0 and 40 VDC. The power input

of the consumer may not exceed 10,0 A.

Note! Absolutely read!

- Read this guidance exactly. With damage, which is caused by neglect of the guidance, the warranty claim goes

out. For damages we do not take over adhesion.

1. introduction

this power supply unit is universally applicable with its infinitely variable adjustment possibilities of voltage and

current for school, occupation, hobby etc.. An electronic current limiting protects the power supply unit against

overloading. Output voltage and - current are electronically stabilized and infinitely variable adjustable. Thus the

electronic restraint current can as adjustable Current limiting to be used, in order to protect consumers against a too

high power input. In the case of an overloading the output voltage is then lowered accordingly (in the case of short-

circuit on close 0V). With removal of the overload the output voltage adjusted before resets itself automatically. The

respective operating point - voltage - (u) - or restraint current (i) - is displayed by one red LED each. The adjusted

values are readable over 2 LCD displays or analog displays each. The voltage or current adjustment is made by

one double button each (rough- fine). Additionally a change .

Produkt Specifikationer

Mærke:	Worx
Kategori:	Slibemaskine
Model:	WX812

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX812 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Slibemaskine Worx Manualer

2 September 2024

2 September 2024

2 September 2024

2 September 2024

6 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Einhell BT-MG 160 KIT Manual

29 Marts 2025

Kraftronic KT-WS 2000 Manual

29 Marts 2025

Kraftronic KT-WS 750 Set Manual

29 Marts 2025

NEO Tools 14-014 Manual

28 Marts 2025

Makita 9500D Manual

28 Marts 2025

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025

Metabo WVBF 18 LT BL 11-125 Quick Manual

1 Februar 2025

Parkside PEXS 270 A1 Manual

13 Januar 2025

Makita 9562CVR Manual

12 Januar 2025

Chicago Pneumatic CP7255 Manual

11 Januar 2025