Worx WX840L.9 Manual

Worx Neglepleje sæt WX840L.9

Læs gratis den danske manual til Worx WX840L.9 (28 sider) i kategorien Neglepleje sæt. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Worx WX840L.9, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

20V Cordless 18 gauge Nail/Staple Gun EN

20V clou/cloueur sans ﬁl de 18 jauge F

Pistola de clavos/grapas inalámbrico del calibre 18 de 20V

P02

P12

P20

WARNING: Some dust created by power

sanding, sawing, grinding, drilling

and other construction activities contains

chemicals known to the state of California

to cause cancer, birth defects or other

reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement

and other masonry products;

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemical: work in a well ventilated area,

and work wit h approved safety equipment,

such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

WARNING: This product can expose

you to chemicals including lead and

Di(2-et hylhexyl)phthalate (DEHP) which

are known to the State of California to

cause cancer and birth defects or other

reproductive harm. For more information go

to www.P65Warnings.ca.gov.

WARNING: Read all safety warnings and

instructions. Failure to follow the warnings

and instructions may result in electric shock, ﬁre and/

or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you

are tired or under the inﬂuence of drugs,

alcohol or medication. A moment of inattention

while operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

Produkt Specifikationer

Mærke:	Worx
Kategori:	Neglepleje sæt
Model:	WX840L.9

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX840L.9 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Neglepleje sæt Worx Manualer

Worx WX840L.9 Manual

23 Juli 2024

Neglepleje sæt Manualer

Nyeste Neglepleje sæt Manualer

4 Januar 2025

4 Januar 2025

4 Januar 2025

4 Januar 2025

4 Januar 2025

4 Januar 2025

4 Januar 2025

21 September 2024

Sanitas SMA 50 Manual

10 September 2024

Medisana ND 850 Manual

2 September 2024