WyreStorm HALO 30 Manual

WyreStorm Højttaler HALO 30

Læs gratis den danske manual til WyreStorm HALO 30 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om WyreStorm HALO 30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

HALO 30 | HALO 60 Quickstart Guide | 220820

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

1 of 4

Halo Series Plug and Play Portable Conference

Speakerphone

HALO 30 | HALO 60 Quickstart Guide

Setting up the Speakerphone

Connecting via Bluetooth®(ONLY APPLICABLE FOR HALO 60)

CONNECTING THE SPEAKERPHONE

CONNECTING TO A LAPTOP/PC

1. Connect the supplied USB Type-C cable into

the port at the base of the speakerphone.

2. Connect the other end of the supplied cable

into an available port on your PC or Laptop.

3. The speakerphone will automatically power

on, which is indicated by the Power LED

shown below.

1. Navigate to your connectivity settings

on your device and ensure Bluetooth is

switched on.

2. Click on Add Bluetooth or other device.

Then a new menu should appear. Click

the Bluetooth option.

3. A list of all discoverable Bluetooth

devices should now appear. Click on

the Device named WyreStorm HALO

60 and after a few seconds, you will be

connected.

Note: If the Speakerphone is powered off and there is still a USB device connected,

simply hold the Power button for 2 seconds and the device will power on.

To begin, make sure the that Halo 60

is discoverable. To do this, turn Bluetooth on by

tapping the Bluetooth button on the device. The

LED will illuminate white, indicating Bluetooth is

on. Next, press and hold the Bluetooth button

until the LED flashes blue. Now the Halo 60 is

discoverable.

2 of 4

HALO 30 | HALO 60 Quickstart Guide | 220820

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

CONNECTING TO A MOBILE DEVICE

1. Navigate to your connectivity settings on your mobile device and

ensure Bluetooth is switched on.

2. All nearby Bluetooth devices should now show. Press WyreStorm

HALO 60 and after a few seconds, you will be connected.

Software Device Setup

Connecting To Zoom

To connect the WyreStorm HALO Speakerphone to your Zoom software, rst navigate to your settings pane which can be found by clicking the gear icon in the