WyreStorm SP-0102-H2 Manual

WyreStorm Splitter SP-0102-H2

Læs gratis den danske manual til WyreStorm SP-0102-H2 (4 sider) i kategorien Splitter. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om WyreStorm SP-0102-H2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
In the Box
1x SP-0102-H2 Splitter
1x 12V DC 0.5A Power Supply
2x Mounting Brackets
1x Quickstart Guide (This Document)
Basic Wiring Diagram
KEY
HDMI
Power
12V DC 0.5A
Power Supply
UHD Display
HDMI to
display
HDMI to
display
UHD Source
UHD Display
IMPORTANT!
Disconnecting and connecting (hot plugging) HDMI or HDBaseT while devices
are powered on may cause damage. WyreStorm recommends powering off
devices before disconnecting these connections.
Additional Information
This Quickstart Guide provides the basic steps for the common uses of this
product. Refer to the Installation Guide and other documentation on the
product page for additional information.
Before Beginning
• WyreStorm recommends visiting the product page before installing this
product for updates to this Quickstart Guide as well as other information
about the product.
• Verify that all items are included in the packaging per the In the Box list.
Installation
1. Connect an HDMI source to the on the splitter using an HDMI HDMI In
cable from a high quality brand such as WyreStorm Express.
2. Connect HDTV displays to using an HDMI cable from a high Output 1
quality brand such as WyreStorm Express.
3. Repeat step 2 for additional displays or additional splitters.
4. Connect the included 12V DC 0.5A power supply to the jack.DC 12V
Copyright © 2016 WyreStorm Technologies | wyrestorm.com
SP-0102-H2 Quickstart Guide | 170117
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation
process.
Pure HDMI 1x2 splitter switch with support for full 4K resolutions and HDCP 2.2.
1x2 4K HDMI Splitter with HDCP 2.2 Encryption
SP-0102-H2 Quickstart Guide
Front Panel
Rear Panel
Input LED Solid: HDMI source is connected and powered On.
Off: HDMI source is not connected or is powered Off.
Output LEDs Solid: Display is connected and powered On.
Off: Display is not connected or is powered Off.
Power LED Solid: The splitter is powered On
Off: The splitter is powered Off
Power In 5.5mm Male Barrel Jack
Connect to the included 12V DC 0.5A Power Supply.
HDMI Outputs 19-pin type A HDMI female:
Supports HDMI and DVI/D (requires adapter-not included). Limited to 600MHz pixel clock.
Input 19-pin type A HDMI female:
Supports HDMI and DVI/D (requires adapter-not included). Limited to 600MHz pixel clock.
Copyright © 2016 WyreStorm Technologies | wyrestorm.com
SP-0102-H2 Quickstart Guide | 170117
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
2 of 4

Produkt Specifikationer

Mærke: WyreStorm
Kategori: Splitter
Model: SP-0102-H2

Har du brug for hjælp?

Hvis du har brug for hjælp til WyreStorm SP-0102-H2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Splitter WyreStorm Manualer

WyreStorm

WyreStorm SP-0102-H2 Manual

27 August 2024
WyreStorm

WyreStorm Express EXP-SP-0102-4K Manual

27 August 2024

Splitter Manualer

Nyeste Splitter Manualer

Smart-AVI

Smart-AVI HDS-2P Manual

9 April 2025
IFM

IFM E43406 Manual

13 Januar 2025
Simrad

Simrad NSPL-400 Manual

11 Januar 2025
Smart-AVI

Smart-AVI HDS-8P Manual

8 Januar 2025
Advantech

Advantech EKI-2701HP-AC-A Manual

8 Januar 2025
Ecler

Ecler VEO-SPH42 Manual

5 Januar 2025
ART

ART SPLITComPro Manual

1 Januar 2025
Digitus

Digitus DS-55338 Manual

1 Januar 2025
Digitus

Digitus DS-55337 Manual

1 Januar 2025
Digitus

Digitus DS-55336 Manual

1 Januar 2025