X-Rite i1 Pro 3 Manual

X-Rite overvåge i1 Pro 3

Læs gratis den danske manual til X-Rite i1 Pro 3 (42 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 31 anmeldelser. Har du et spørgsmål om X-Rite i1 Pro 3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/42

EQUIPMENT INFORMATION

If this product is used in a manner not speciﬁed by the instruction, the safety protection provided by the device

may be impaired or become inoperable.

CE Declaration

Manufacturer’s Name: X-Rite, Incorporated

Authorized Representative: X-Rite, Incorporated

Siemensstraße 12b • 63263 Neu-Isenburg • Germany

Phone:+49 (0) 61 02-79 57-0 • Fax: +49 (0) 61 02 -79 57-57

Model Name: i1Pro

Directive(s) Conformance: EMC 2004/108/EC LVD 2006/95/EC

FEDERAL COMMUNICATIONS COMMISSION NOTICE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA COMPLIANCE STATEMENT

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

NOTE: USB interface cable ( 2.0 m) shipped with this device must be used in order to maintain compliance with

the desired CE mark requirements, FCC Part 15

Rules, and Canadian ICES-003.

• Modiﬁcations not expressly approved by the manufacturer could void the user's authority to operate

Use of this equipment in a manner other than that speciﬁed by X-Rite, Incorporated may compromise

design integrity and become unsafe.

WARNING: This instrument is not for use in explosive environments.

ADVERTENCIA – NO use este aparato en los ambientes explosivos.

AVVERTIMENTO – NON usare questo apparecchio in ambienti esplosivi.

WARNUNG: Das Gerät darf in einer explosiven Umgebung NICHT verwendet werden.

AVERTISSEMENT: Cet instrument ne doit pas être utilisé dans un environnement explosif.

the equipment under FCC rules.

Safety InformationSafety InformationImportant Notices

CE Declaration

Hereby, X-Rite, Incorporated, declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive(s) EMC 2014/30/EU, LVD 2014/35/EC,

and RoHS EU 2015/863.

FEDERAL COMMUNICATIONS COMMISSION NOTICE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA COMPLIANCE STATEMENT

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

NOTE: USB interface cable shipped with this device must be used in order to maintain compliance with the desired

CE mark requirements, FCC Part 15 Rules, and Canadian ICES-003.

Produkt Specifikationer

Mærke:	X-Rite
Kategori:	overvåge
Model:	i1 Pro 3

Har du brug for hjælp?

Hvis du har brug for hjælp til X-Rite i1 Pro 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge X-Rite Manualer

X-Rite i1 Pro 3 Manual

27 December 2024

overvåge Manualer

Nyeste overvåge Manualer

BenQ DesignVue PD2730S Manual

8 April 2025

Asus VA279QGS Manual

8 April 2025

Acer EV227Q Manual

8 April 2025

BenQ PD3226G Manual

7 April 2025

Philips 221V8LB Manual

4 April 2025

Extron TLS 1025M Manual

2 April 2025

PureTools PT-SCREEN-100 Manual

1 April 2025

Viewsonic VG2752-2K Manual

30 Marts 2025

Satco S13165 Manual

30 Marts 2025

Satco S16434 Manual

30 Marts 2025