Xenarc 1589GFP Manual

Xenarc Skærm 1589GFP

Læs gratis den danske manual til Xenarc 1589GFP (13 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Xenarc 1589GFP, eller vil du spørge andre brugere om produktet?

Side 1/13
1589GFP
15.6-inch Sunlight Readable Touch Display
USER MANUAL
Xenarc Technologies Corp.
1
Connecting 1589GFP Display with Your Device
1. Remove the 12 screws (circled in red below image P1) and remove the input
compartment cover to reveal the input compartment as show below in image P2.
P1. Remove 12 Screws holding the cover P2. Input Compartment after cover removed
2. Each cable needs to be matched with correct size Waterproof Rubber Grommet.
For example, the included HDMI cable is 6mm in diameter (below image P3), so
take Size #6 Rubber Grommet (Size number is marked on the Rubber Grommet.
Size #6 is already pre-installed on the monitor.) and install it onto the HDMI cable
(below image P4). * If you are not using the included cables, please measure the
cable wire diameter to determine the correct size Rubber Grommet to use.
P3. Diameter of HDMI cable: 6mm.
P4. Install Rubber Grommet onto HDMI cable.
3. Plug the HDMI cable into the monitor, push the Rubber Grommet down into the
slot like the below image P5. Ensure that the Rubber Grommet is pushed to the
very bottom in order to guarantee the best water protection. Connect the other
side of the cable to your source device.


Produkt Specifikationer

Mærke: Xenarc
Kategori: Skærm
Model: 1589GFP

Har du brug for hjælp?

Hvis du har brug for hjælp til Xenarc 1589GFP stil et spørgsmål nedenfor, og andre brugere vil svare dig