Xiaomi Mi Power Strip Manual

Xiaomi Ikke kategoriseret Mi Power Strip

Læs nedenfor 📖 manual på dansk for Xiaomi Mi Power Strip (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2

Mi Power Strip

Specications

Features of device

Read the instruction before use the device

Name: Mi power strip (3 USB ports, 2А quick

charge)

Model: XMCXB01QM

Standard: Q/DXQMK0001-2015

Case material: high-quality thermo-resistant plactic;

Dimensions: 225х41х26 (mm)

Lenght: common lenght unclude cable: 1.8m

Weight: 300g (incl. cabel)

Input: 10А, 250V~

Output: 10А, 250V (электрическая розетка)

Power: 2500W

Input USB: 100-240V~, 50-60Hz, 0.5A

Output USB: 1 port USB, 5V-----2.1A(TYP), 3 ports,

5V-----3.1A(TYP)

Temperature range: -10С~+40C

Safety: Overload protection: at a time when the

current exceeds the limit, the device is automatically

disconnected from the power supply, thus preventing

an overload. After eliminating an emergency of

overload, you can manually resume the power strip,

by replacing a fuse.

Double protection: double, triple independent lines

of protection.

Heat resistance: high re-resistant material,

which complians to international standards, which

slows down the spread of re or even prevent the

possibility of re.

High performance: 3 USB ports for simultaneous

charging of three devices. Compliance to

international standards, each slot can be used for

the same standard outlets with three at prongs, two

plugs and sockets for standard German with two

round 4.8mm plugs. Stainless steel, new technology,

low rate of increasing temperature of device.

Options: integrated automatic chip, which have an

ability to quickly recharge the 5V for most devices

such as the Mi device, Apple, Samsung and others.

Quality: from well-known domestic brands for

the production of electrical extension cords, «Mi

Electronics» has made a huge breakthrough,

providing a reliable guarantee of quality.

Notice

The total power capacity of the connected electrical

equipment must not exceed rated power capacity of

the device.

It is forbidden to twist or tie a cable, do not use

the device with a twisted cable to avoid abnormal

overheating.

Grounding front of intermittent or non-standard

ground may entail a certain danger.

Do not use in damp, wet areas.

Do not disassemble the device and open its back

cover.

It is forbidden to use the device near the sources of

re, and a cord of the device must be kept away from

heat sources.

Please do not allow non-specialists to open, modify or

repair this device.

When the current exceeds 10A, overload protection

switch disconnects the power, after removing powered

devices, you can manually enable Mi Power Strip.

Due to the short circuit, overload, and for other

reasons that a USB port on the device goes into

protection state, you can not normally charge other

devices. Only after removal of defective devices or

remove the problem, you can manually resume a

power strip.

XIAOMI-MI.COM

Produkt Specifikationer

Mærke:	Xiaomi
Kategori:	Ikke kategoriseret
Model:	Mi Power Strip
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	230 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	268 mm
Dybde:	50 mm
Højde:	38 mm
Vægt:	443 g
Produktfarve:	Hvid
Driftstemperatur (T-T):	0 - 35 °C
Kabellængde:	1.4 m
Maksimal indgangseffekt:	3680 W
Understøttet placering:	Indendørs
Antal USB-porte:	3
Antal produkter inkluderet:	1 stk
Strømstiktype:	Type F (CEE 7/4)
AC udgange, antal:	3 AC stikkontakt(er)
AC stikkontakt typer:	Type F
Strøm (maks.):	16 A