Xtorm XPD06 Manual

Xtorm Batterioplader XPD06

Læs gratis den danske manual til Xtorm XPD06 (4 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Xtorm XPD06, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

MICRO USB CABLE

BY A-SOLAR

EN: Warnings

Don’t drop, dissemble or attempt to repair the device by yourself.

Avoid exposure to water or high humidity.

Don’t expose to any heat source.

Keep out of reach of children.

Don’t use in the presence of flammable gas.

NL: Waarschuwing

Probeer het apparaat niet zelf te repareren of te demonteren.

Vermijd blootstelling aan water of een hoge luchtvochtigheid.

Niet blootstellen aan een warmtebron.

Buiten bereik van kinderen houden.

Niet gebruiken in de aanwezigheid van brandbaar gas.

DE: Achtung

Versuchen Sie nicht, den das Gerät selbst zu reparieren. (Garantieverlust)

Vermeiden Sie hohe Luftfeuchtigkeit oder Kontakt mit Wasser

Verwenden Sie das Gerät nicht in der Nähe von brennbaren Gasen oder

Flüssigkeiten

Halten Sie das Gerät fern von Hitzequellen.

Ausser Reichweite von Kindern halten.

FR: Attention

Ne pas faire tomber ou démonter ou tenter de réparer le produit

soi-même.

Ne pas exposer le produit à l'eau ou dans un endroit trop humide.

Ne pas poser le chargeur solaire près d'une source de chaleur.

Tenir hors de portée des enfants

Ne pas utiliser en présence de gaz inflammables

IT: ATTENZIONE

Non usare vicino ad una fiamma.

Non esporre vicino a fonti di calore elevato

Non modificare la struttura o disassemblare

Smettere di utilizzare immediatamente nel caso si sentano odori strani,

calore, o strani rumori provenire dallo stesso.

Non lasciar giocare i bambini.

Usare solo in luoghi asciutti.

Riciclare l’apparato secondo le norme vigenti nella nazione di utilizzo.

CZ: UPOZORNENÍ

Neupusťte, nerozebírejte, ani se nepokoušejte spravit nabíjeèku sami.

Vyvarujte se pùsobení vody nebo vysoké vlhkosti.

Nevystavujte tepelným zdrojem.

Uchovávejte mimo dosah dìtí.

Nepoužívejte v blízkosti hoølavých plynù.

SK: Upozornenia

Neupustite, nerozoberajte, ani sa nepokúšajte opraviť nabíjaèku sami.

Vyvarujte sa pôsobeniu vody alebo vysokej vlhkosti.

Nevystavujte tepelným zdrojom.

Uchovávajte mimo dosahu detí.

Nepoužívajte v blízkosti hoøavých plynov

SE: varning

Tappa inte, ta inte isär eller försök reparera

laddaren själv

Utsätt inte för vatten eller hög fuktighet

Utsätt inte för värme.

Förvaras utom räckhålll för barn.

Använd ej i närheten av lättantändlig gas.

ES: Atención

No dejar caer el producto.

No desmontarlo ni intentar repararlo, por sus propios medios.

Evitar el contacto con el agua o fuente de humedad.

No exponer la alimentación a una fuente de calor.

Mantenga fuera del alcance de los niños.

No utilizar en presencia de fuentes o gas infl amables

* THIS MANUAL IS AVAILABLE IN DIFFERENT LANGUAGES

ON OUR WEBSITE

Hoofdveste 19

3992 DH Houten

The Netherlands

T: + 31 (0) 30 635 4800

F: + 31 (0) 30 635 4801

www.xtorm.eu

XPD06 Smart Hub

WIRELESS BACK-UP & POWER STATION

WIFI: 802.11 b/g/n

Battery: 5200mAh

Battery type: Li-ion

Input: 5V/1A

USB output: 2x 5V (2A+0,5A)

Dimentions:

99x43x27mm

Weight: 140grams

LED battery indication Yes

Charging time: 5-6 hrs

Charging time Mobile equipment: 1-4 hrs

Operating systems: iOS & Android

(others via web-interfase)

Photo: JPG, JPEG, PNG, BMP

Audio: MP3, WAV

Video: MOV, MP4, M4V

Documents: DOC, XLS, PPT, PDF, TXT

SMART HUB

SPECIFICATIONS:

SUPPORTED MEDIA & OS

SD CARD READER (1)

USB DRIVE INPUT (2)

1. Slide the SD card into the

SD slot on top/back of the

device.

The SD card will show in

the WPD app.

To remove it push on the end

of the card.

2. Connect the USB drive to

the USB port “USB drive”

at the front of the device.

The USB drive will show in

the WPD app.

The connected storage source

will appear in the app as shown

above.

It is possible to connect both

(a USB drive + SD card). They

will both appear in the app

as shown above.

4. Connecting a USB pen or SD card

MICRO USB

BATTERY INDICATOR

FOR IPHONE/IPAD USE

OWN USB CHARGING

CABLE.

CHARGING INDICATION:

Press button 1x

LED lights show:

= 0-25%

= 25-50%

= 50-75%

= 75-100%

Expect 4-5 hours* charging time

METHOD 2:

Connect the USB cable

with your A/C adapter*

METHOD 1:

Connect the USB cable

with the USB Port

of your PC/laptop.

BATTERY INDICATOR

WIFI USAGE INDICATOR

STATUS INDICATOR

Connect the micro

USB cable with

USB IN.

Your smartphone

will indicate charging

status.

1. Hold the button for 5

seconds. The blue light will

start flashing.

When the blue led is flashing

fast, the device is ready

to be used.

Downdload the free APP

“WPD” from your app

store or scan the QR

code shown above.

2. Turn the WIFI of your

smartphone,tablet or

computer on. Choose

“WPD” out of the list of

availalbe wifi networks.

3. Open the “WPD” App on

your device.

In the app you can acces your

files, change name and wifi password

and configurer the internet bridge.

See your chapter 5 & 6 for more details.

Connect with your

mobile device using

the micro USB cable

or your own USB

cable

Your mobile device

is out of power

Connect the USB cable

with charger and press the

button to start charging.

Expect 1-2hours*

charging time

* By ideal conditions,

1 (5V/2A)

2 (5V/0,5A - USB drive)

ETHERNET PORT

Did you know?

1 x short press = Battery status + USB Charging activate

5 sec. press = Activate wireless functionalities

3 sec. press = Power off

CHARGING INDICATION:

Press button 1x

LED lights show:

= 0-25%

= 25-50%

= 50-75%

= 75-100%

BATTERY INDICATOR

* not included

2.2. Charge the device by USB or A/C

1. Product overview

2.1. Charge your mobile device

3. Conncect to WIFI with mobile device

WIFI INDICATOR (BLUE)

Produkt Specifikationer

Mærke:	Xtorm
Kategori:	Batterioplader
Model:	XPD06
Bredde:	43 mm
Dybde:	99 mm
Højde:	26 mm
Vægt:	140 g
Brugervejledning:	Ja
Produktfarve:	Hvid
Kompatible hukommelseskort:	SD
Ethernet LAN-porte (RJ-45):	1
Antal USB 2.0-porte:	3
Kabler inkluderet:	USB
LED-indikatorer:	Ja
Udgangsspænding:	5 V
Indbygget kortlæser:	Ja
USB-drevet:	Ja
Dataoverførselshastighed:	- Mbit/s
Hub-grænseflader:	USB 2.0