Yamato DSR-400 Manual

Yamato Ikke kategoriseret DSR-400

Læs gratis den danske manual til Yamato DSR-400 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Yamato DSR-400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

DSR-400 Operation Manual

YCO-1105-08-04

YAMATO CORPORATION

1775 S. Murray Blvd.

Colorado Springs, CO 80916 USA

Tel (719) 591-1500 Fax (719) 591-1045

YAMATO TECH CORPORATION

#112-19425 Langley By-Pass

Surrey, B.C. V3S 6K1 Canada

Tel (604) 533-2338 Fax (604) 533-0827

YCO-1105-08-04

DSR-400 Operation Manual

I. Introduction 1

II. Specifications 1

III. Operation 1

A. Control Panel 1

B. Power 2

C. Turning the Scale On and Off 2

D. Zero the Display 2

E. Unit Selection 2

F. Weighing 3

1. Basic Weighing 3

2. Net Weighing 3

3. Batch Weighing 4

V. Troubleshooting and Error Messages 4

Table of Contents

SAFETY INSTRUCTIONS

Before using the scale, carefully read, understand, and follow the “Safety Instructions” described in this manual. Observe the advice given in

the “Operations” section to ensure proper operation. Keep this operation manual handy for reference.

1) This scale is not an explosion-proof model. Do not use the scale in an atmosphere containing flammable gases or explosive fumes. A fire or an explosion can result.

2) Do not operate the scale if there is smoke or a burnt smell coming from the scale. Remove the batteries or unplug the AC adaptor immediately. After making sure that there is no

danger, consult your dealer. Never try to repair the scale by yourself.

3) Never step on or sit on the scale. Not only will the scale be damaged, but you may also be injured.

4) Place the item to be weighed in the center of the platform. Items placed on the edge of the platform may fall off and cause injury.

5) When weighing a heavy, large or unbalanced item, make sure the item is stable on the platform, otherwise, an accident may occur.

6) When carrying or moving the scale, be sure to hold it by the bottom of the base with both hands. If you hold it by the platform, the platform or the platform support may become

detached causing the scale to fall. This will damage the scale. The platform is designed for easy removal and clean-up.

7) Do not insert your finger into the gap or holes in the scale. You may be injured.

8) The DSR-400 uses a liquid crystal display. If the LCD breaks and the liquid leaks from the LCD, do not touch it with your fingers. The liquid is toxic if ingested. Be especially careful

around small children.

To prevent damage to the scale

1) Do not push the indicator or keys with sharp objects. They may break or puncture the switch membrane panel.

2) Use the specified power supply and choose a suitable environment. If you do not, the weight readings may be inaccurate and the scale may be damaged.

3) The scale is a sensitive weighing instrument, avoid physical shocks. If you drop something on the scale, step on the platform, or drop it, the scale may be damaged and lose

accuracy.

4) If the scale becomes dirty, wipe it with a soft cloth. For stubborn stains, apply a little neutral detergent and then wipe the scale with a dry cloth. Do not use thinner, benzene, hot

water, or chemical agents, all of which can cause deformation, discoloration, or deterioration of the scale.

5) Never remove the case. The fine adjustment section may be damaged and you may be injured by sharp edges on the internal parts.

6) Do not place the scale upside down except when replacing the batteries.

7) When a low battery condition occurs, replace all of the batteries. When installing the batteries, install them according to the polarity markings in the case (+, -). If the scale will not be

used for a long period, remove the batteries.

To keep the scale working efficiently

1) Place the scale on a flat stable surface that will support the scale and the load.

2) Do not place the scale in an area exposed to direct sunlight or to wind currents from an air conditioner, otherwise, the weights will not be accurate.

3) Do not place the scale near machines that create vibrations or electromagnetic disturbance, such as microwave ovens, portable phones, or large motors. This will affect the accuracy.

4) The operating temperature range is from –5 C to +104 C (32°F to 104°F). Do not subject the scale to sudden temperature changes; allow the scale to adjust to the new temperature

before use.

5) This scale is not waterproof or dustproof. Do not expose the scale to splashing water. Do not install the scale in an extremely humid or dusty environment.

6) If the scale is sealed, do not break the seal. If you break the seal, the scale will not be considered legal for trade. In this case, contact your dealer.