Zempire Atmos Manual

Zempire Fuld Atmos

Læs gratis den danske manual til Zempire Atmos (2 sider) i kategorien Fuld. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Zempire Atmos, eller vil du spørge andre brugere om produktet?

Side 1/2
PITCHING INSTRUCTIONS - ATMOS
2. Assemble the two pole sections.
Ensure the poles are inserted firmly
together. If the ferrules do not
connect together correctly they can
cause damage when tensioned.
8. Peg out all peg points and
o
angle
7. Connect the fly to the inner by
connecting the Side Release
buckles at the end of each pole
line.
1x
3. Thread the CHARCOAL pole
through the front pole sleeve that
runs above the door. Tension the
pole connecting the ends of the
pole into the eyelets located on
each side of the tent.
1. Clear your site making sure there are no
sharp objects. Try to get a site that is as flat
as possible. Stretch out the inner tent.
1x
6. Throw the flysheet over the inner
and fasten the Velcro ties found on
the inside of the fly around the
pole lines.
4. Thread the remaining PURPLE
pole through the pole sleeve that
runs across the rear of the inner tent.
Tension by connecting the ends of
the pole into the eyelets located on
each side of the tent.
5. Peg out the inner tent. Try to
tension the floor so that it sits flat.


Produkt Specifikationer

Mærke: Zempire
Kategori: Fuld
Model: Atmos

Har du brug for hjælp?

Hvis du har brug for hjælp til Zempire Atmos stil et spørgsmål nedenfor, og andre brugere vil svare dig