Zoom AC-2 Manual

Zoom Ikke kategoriseret AC-2

Læs gratis den danske manual til Zoom AC-2 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Zoom AC-2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Thank you very much for purchasing a (hereafter, " ").ZOOM

Please read this manual carefully to fully understand the functions of the so that

you can make the most of it for many years.

Keep this manual in a convenient location and refer to it as necessary.

Operation Manual

Contents

Copying or reprinting this manual in part or in whole without permission is prohibited.

Manufacturer names and product names are trademarks or registered trademarks of their respective owners.

The names are used only to illustrate sonic characteristics and do not indicate any affiliation with the Zoom Corporation.

Usage and Safety Precautions ………… 2

Introduction ………………………………… 3

Names of parts …………………………… 4

Connecting a guitar ……………………… 6

Connecting output devices ……………… 6

Turning the power on …………………… 7

Setting the pickup type …………………… 8

Setting the volume………………………… 8

Setting the source guitar type…………… 9

Adjusting the equalization ……………… 10

Adjusting the reverb ……………………… 10

Using the boost function ………………… 11

Using the anti-feedback function ……… 11

Using the tuner …………………………… 12

Setting the type of batteries used ……… 12

Connecting audio equipment …………… 13

Updating the rmware …………………… 14

Troubleshooting …………………………… 15

Speci cations ……………………………… 15

Usage and Safety Precautions

In this operation manual, symbols are used to highlight

warnings and cautions that you must read to prevent

accidents. The meanings of these symbols are as follows.

Warning

Something that could cause serious injury

or death.

Caution

Something that could cause injury or

damage to the equipment.

Other symbols used

An action that is mandatory.

An action that is prohibited.

Warnings

Operation using an AC adapter

Always use an AC adapter that is 9V DC 500mA center negative

(ZOOM AD-16).

Do not do anything that could exceed the ratings of outlets and

other electrical wiring equipment.

Before using the equipment in a foreign country or other region

where the electrical voltage differs, always consult with a shop

that carries ZOOM products and use the appropriate AC adapter.

Operation with batteries

Use 2 commercially-available 1.5V AA batteries (alkaline or nick-

el metal hydride).

Carefully study the warning indications of the batteries before

use.

Always keep the battery cover closed during use.

Alterations

Do not open the case or modify the product.

Cautions

Product handling

Do not drop, bump or apply excessive force to the unit.

Be careful not to allow foreign objects or liquids to enter the

unit.

Operating environment

Do not use in extremely high or low temperatures.

Do not use near heaters, stoves and other heat sources.

Do not use in very high humidity or where it could be splashed

by water.

Do not use in places with frequent vibrations.

Do not use in places with much dust or sand.

AC adapter handling

When disconnecting the power plug from an outlet, always pull

on the plug itself.

Disconnect the power plug from the outlet when the unit will

not be used for a long time and whenever there is lightning.

Battery handling

Install batteries with the correct +/ orientations.−

Use the speci ed batteries.

Do not use new and old batteries together. Do not use batteries

of different brands or types together.

Interference with other electrical equipment

In consideration of safety, the has been designed

to minimize its emission of electromagnetic waves and to

suppress interference from external electromagnetic waves.

However, equipment that is very susceptible to interference

or that emits powerful electromagnetic waves could result in

interference if placed nearby. If this occurs, place the

and the other device farther apart.

With any type of electronic device that uses digital control,

including the , electromagnetic interference could

cause malfunction, corrupt or destroy data and result in other

unexpected trouble. Always use caution.

Cleaning

Use a soft cloth to clean the exterior of the unit if it becomes

dirty. If necessary, use a damp cloth that has been wrung out

well to wipe it.

Never use abrasive cleansers, wax or solvents such as alcohol,

benzene or paint thinner.

Breakdown and malfunction

If the unit becomes broken or malfunctions, immediately turn

the power off, disconnect the AC adapter and disconnect other

cables. Contact the store where you bought the unit or ZOOM

service with the following information: product model, serial

number and specific symptoms of breakdown or malfunction,

along with your name, address and telephone number.

Safety Precautions

Usage Precautions

Remove the batteries when the unit will not be used for a long

time.

If a leak occurs, thoroughly wipe the battery case and battery

terminals to remove the leaked uid.

Connection cables and input/output jacks

Always turn the power OFF for all equipment before connecting

any cables.

Always disconnect all connection cables and the AC adapter

before moving the unit.

Volume

Do not use at a loud volume for a long time.

Declaration of Conformity

For EU Countries

FCC regulation warning (for U.S.A.)

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Produkt Specifikationer

Mærke:	Zoom
Kategori:	Ikke kategoriseret
Model:	AC-2

Har du brug for hjælp?

Hvis du har brug for hjælp til Zoom AC-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Zoom Manualer

Zoom ERL-6 Manual

13 Januar 2025

Zoom MS-90LP+ Manual

12 December 2024

Zoom MS-70CDR+ Manual

2 September 2024

1 August 2024

30 Juli 2024

29 Juli 2024

27 Juli 2024

26 Juli 2024

24 Juli 2024

24 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ORNO OR-ZL-1678 Manual

15 Juni 2025

LiftMaster 041-0405-000 Manual

15 Juni 2025

CDN TMW1 Manual

15 Juni 2025

Bradley S19-500 Manual

15 Juni 2025

Vestil FE-4-72 Manual

15 Juni 2025

Powr-Flite PFX1080 Manual

15 Juni 2025

Hughes & Kettner BassKick 707 Manual

15 Juni 2025

Marshall VSC-100 Manual

15 Juni 2025

Xiaomi Smart Electric Toothbrush T501 Manual

15 Juni 2025

Scarlett SC-SM10S53 Manual

15 Juni 2025