Zoom G1 Manual

Zoom Ikke kategoriseret G1

Læs gratis den danske manual til Zoom G1 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Zoom G1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Operation Manual

Reproduction of this manual, in whole or in part,

by any means, is prohibited.

SAFETY PRECAUTIONS / Usage

Precautions ..................................2

Terms Used in This Manual.......... 3

Controls and Functions /

Connections ................................4

Selecting a Patch ...........................6

Using the Tuner .............................8

Using the Rhythm Function ........10

Editing a Patch .............................12

Storing/Copying Patches ............14

Changing the Way Patches Are

Called Up ...................................16

Using a Foot Switch or Pedal .....16

Using the foot switch (FS01)

(G1 only) ............................... 16

Using the expression pedal .... 17

Effect Types and Parameters .....18

Linking Effects ......................... 18

Explanation of symbols ........... 18

PATCH LEVEL ........................ 19

COMP/EFX (Compressor/EFX)

module ................................. 19

DRIVE module ........................ 19

EQ module .............................. 21

ZNR/AMP (ZNR/Amp Simulator)

module ................................. 21

MODULATION module ........... 22

DELAY module .......................23

REVERB module ..................... 24

G1/G1X Preset Pattern ............ 25

Restoring Factory Defaults ........ 25

Special Features of G1X ............. 26

[PEDAL ASSIGN] key

operation ................................ 26

Adjusting the expression

pedal ...................................... 26

Specifications ..............................27

Troubleshooting ..........................27

Contents

Thank you for selecting the

ZOOM G1/G1X

(hereafter simply called the "

G1/G1X

").

Please take the time to read this manual carefully to get the most out of this product

and to ensure optimum performance and reliability.

Keep this manual at hand for future reference.

ZOOM G1/G1X

SAFETY PRECAUTIONS

In this manual, symbols are used to highlight warnings and

cautions for you to read so that accidents can be prevented. The

meanings of these symbols are as follows:

This symbol indicates explanations about extremely

dangerous matters. If users ignore this symbol and

handle the device the wrong way, serious injury or

death could result.

This symbol indicates explanations about dangerous

matters. If users ignore this symbol and handle the

device the wrong way, bodily injury and damage to

the equipment could result.

Please observe the following safety tips and precautions to

ensure hazard-free use of the G1/G1X.

Power requirements

Since power consumption of this unit is fairly high, we

recommend the use of an AC adapter whenever

possible. When powering the unit from batteries, use

only alkaline types.

[AC adapter operation]

• Be sure to use only an AC adapter which supplies 9 V DC,

300 mA and is equipped with a "center minus" plug

(Zoom AD-0006). The use of an adapter other than the

speciﬁed type may damage the unit and pose a safety

hazard.

• Connect the AC adapter only to an AC outlet that supplies

the rated voltage required by the adapter.

•When disconnecting the AC adapter from the AC outlet,

always grasp the adapter itself and do not pull at the cable.

• During lightning or when not using the unit for an

extended period, disconnect the AC adapter from the AC

outlet.

[Battery operation]

• Use four conventional IEC R6 (size AA) batteries

(alkaline).

• The G1/G1X cannot be used for recharging.

•Pay close attention to the labelling of the battery to make

sure you choose the correct type.

•When not using the unit for an extended period, remove

the batteries from the unit.

• If battery leakage has occurred, wipe the battery

compartment and the battery terminals carefully to

remove all remnants of battery ﬂuid.

•While using the unit, the battery compartment cover

should be closed.

Environment

To prevent the risk of ﬁre, electric shock or

malfunction, avoid using your G1/G1X in environments

where it will be exposed to:

• Extreme temperatures

• Heat sources such as radiators or stoves

•High humidity or moisture

• Excessive dust or sand

• Excessive vibration or shock

Handling

•Never place objects ﬁlled with liquids, such as vases, on

the G1/G1X since this can cause electric shock.

•Do not place naked ﬂame sources, such as lighted candles,

on the G1/G1X since this can cause ﬁre.

• The G1/G1X is a precision instrument. Do not exert

undue pressure on the keys and other controls. Also take

care not to drop the unit, and do not subject it to shock or

excessive pressure.

•Take care that no foreign objects (coins or pins etc.) or

liquids can enter the unit.

Connecting cables and input and output

jacks

You should always turn off the power to the G1/G1X

and all other equipment before connecting or

disconnecting any cables. Also make sure to disconnect

all connection cables and the power cord before moving

the G1/G1X.

Alterations

Never open the case of the G1/G1X or attempt to

modify the product in any way since this can result in

damage to the unit.

Volume

Do not use the G1/G1X at a loud volume for a long

time since this can cause hearing impairment.

Usage Precautions

Electrical interference

For safety considerations, the G1/G1X has been designed to

provide maximum protection against the emission of

electromagnetic radiation from inside the device, and protection

from external interference. However, equipment that is very

susceptible to interference or that emits powerful

electromagnetic waves should not be placed near the G1/G1X,

as the possibility of interference cannot be ruled out entirely.

With any type of digital control device, the G1/G1X included,

electromagnetic interference can cause malfunctioning and can

corrupt or destroy data. Care should be taken to minimize the

risk of damage.

Cleaning

Use a soft, dry cloth to clean the G1/G1X. If necessary, slightly

moisten the cloth. Do not use abrasive cleanser, wax, or solvents

(such as paint thinner or cleaning alcohol), since these may dull

the ﬁnish or damage the surface.

Please keep this manual in a convenient place for

future reference.

arning

Caution

arning

Caution

arning

Caution

SAFETY PRECAUTIONS / Usage Precautions

Caution

ZOOM G1/G1X

AMPZNREQCOMP/EFX DRIVE MODULATION DELAY REVERB

IN OUT

Operating the G1/G1X on batteries

Turn the G1/G1X over and open the cover

of the battery compartment on the bottom.

G1/G1X bottom view

Latch

Cover

Press latch to release

and then lift the cover.

Insert four fresh IEC R6

(size AA) batteries.

Close the cover of the

battery compartment.

Polarity is opposite for two

banks of two batteries each.

Four IEC R6

(size AA)

batteries

Use four IEC R6 (size AA) batteries

When the batteries are getting low, the indication

"bt" appears on the display.

When operating the G1/G1X on batteries, it is advisable

to disconnect the guitar cable plug from the [INPUT]

jack when not using the unit, to conserve battery power.

Push the cover in until the

latch audibly snaps into place.

Terms Used in This Manual

This section explains some important terms that are used throughout the G1/G1X documentation.

■

Effect module

As shown in the illustration above, the G1/G1X can

be thought of as a combination of several single

effects. Each such effect is referred to as an effect

module. In addition to modules such as DRIVE and

MODULATION, the G1/G1X also provides a

module for noise reduction and amp simulation

(ZNR/AMP). Parameters such as effect intensity

can be adjusted for each module individually, and

modules can be switched on and off.

■

Effect type

Some effect modules have several different effects

which are referred to as effect types. For example,

the MODULATION module comprises chorus,

flanger, pitch shifter, and other effect types. Only

one of these can be selected at a time.

■

Effect parameter

All effect modules have various parameters that can

be adjusted. These are called effect parameters.

When thinking of an effect module as a compact

effect, the parameters change the tone and effect

intensity similar to the knobs on the device.

■

Patch

In the G1/G1X, effect module combinations are

stored and called up in units referred to as patches.

A patch comprises information about the on/off

status of each effect module, about the effect type

used in each module, and about effect parameter

settings. The internal memory of the G1/G1X can

store up to 80 patches.

■

Bank and area

A group of ten patches is called a bank. The

memory of the G1/G1X comprises a total of eight

banks, labelled with letters A to d and numbers 0 to

3. Banks A – d are the user area which allows read/

write. 0 – 3 form the preset area of read-only

patches.

The patches within each

bank are numbered 0

through 9. To specify a

patch of the G1/G1X, you

use the format "A1" (patch

number 1 from bank A),

"06" (patch number 6 from

bank 0), etc.

■

Mode

The internal status of the G1/G1X is referred to as

the operation mode. In "play mode" you can select

patches and use them for playing your instrument.

In "edit mode" you can modify the effects, and there

is also a "rhythm mode" in which you can make

settings for the rhythm function. The module

selector serves for switching between these three

modes.

BANK 3

PATCH 0

PATCH 1

PATCH 9

BANK d

PATCH 0

PATCH 1

PATCH 9

BANK C

PATCH 0

PATCH 1

PATCH 9

BANK b

PATCH 0

PATCH 1

PATCH9

BANK A

PATCH 0

PATCH 1

PATCH 9

Produkt Specifikationer

Mærke:	Zoom
Kategori:	Ikke kategoriseret
Model:	G1

Har du brug for hjælp?

Hvis du har brug for hjælp til Zoom G1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Zoom Manualer

Zoom G5 Manual

31 Juli 2025

Zoom S6 SessionTrak Manual

31 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025

29 Juli 2025

Zoom MultiStomp 505II Manual

29 Juli 2025

Zoom 4040 Manual

29 Juli 2025

Zoom 505 Manual

29 Juli 2025

Zoom Tri Metal TM-01 Manual

25 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MY500XT Manual

1 August 2025

Navman FOCUS150 GPS Manual

1 August 2025

Scheppach TW1000 Manual

1 August 2025

Navman MiVue 750 WIFI Manual

1 August 2025

Navman MiVue Drive FHD Manual

1 August 2025

Midea MEC64 Manual

1 August 2025

Navman MY50T Manual

1 August 2025

Navman M100 Manual

1 August 2025

Navman MiVue 770 SAFETY Manual

1 August 2025

Navman MiVue 790 Manual

1 August 2025