ZyXEL PLA6457 Manual
ZyXEL
Powerline adapter
PLA6457
Læs gratis den danske manual til ZyXEL PLA6457 (50 sider) i kategorien Powerline adapter. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om ZyXEL PLA6457, eller vil du spørge andre brugere om produktet?
Side 1/50
Default Login Details
User’s Guide
PLA6457
G.hn Wave 2 Powerline Pass-through Gigabit Ethernet Adapter
Copyright © 2021 Zyxel and/or its affiliates. All Rights Reserved.
Default Network Name G.hn Network
LAN IP Address http://DHCP-assigned
IP
Default Password FLYPIG2400
Version 1.0 Ed. 2, 08/2021
PLA6457 User’s Guide
2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
Screenshots and graphics in this book may differ slightly from what you see due to differences in release
versions or your computer operating system. Every effort has been made to ensure that the information
in this manual is accurate.
Related Documentation
• Quick Start Guide
The Quick Start Guide shows how to connect and set up the PLA in your network.
• More Information
Go to support.zyxel.com to find other information on the PLA.
Chapter 1 Introducing the PLA
PLA6457 User’s Guide
8
1.1.1 G.hn Standard
G.hn is a specification for home networking devices that operates over power lines. G.hn specifies the
point-to-point security inside a domain, which means that each pair of transmitter and receiver uses a
unique encryption key which is not shared by other devices in the same domain. Devices can securely
communicate with each other at high data transfer rates.
The PLA uses 128-bit Advanced Encryption Standard (AES) to ensure safe transfer of information.
1.2 LEDs
The following section describes the lights (LEDs) on the PLA.
The following figure is the front panel of the PLA. Use the lights to determine if the PLA is behaving
normally or if there are some problems on your G.hn Network.
Figure 2 PLA Lights
The following table describes the behavior of the lights on the PLA.
Table 2 LEDs
LIGHTS ICON COLOR STATUS DESCRIPTION
POWER Green On The PLA is on and receiving power.
Blinking The power LED blinks when it is in standby mode that allows you
to save on power during periods of inactivity. Refer to Section 1.3
on page 9 for details on this feature.
Off The PLA is not receiving power.
POWERLINE Green On The PLA detects another PLA and can transmit and/or receive
data at greater than 80 Mbps.
Amber The PLA detects another PLA and can transmit and/or receive
data between 20 – 80 Mbps.
Red The PLA detects another PLA and can transmit and/or receive
data between 0 – 20 Mbps.
Green/
Amber/
Red
Blinking The PLA is communicating with another PLA. Data is being
transmitted and/or received.
Off The PLA does not detect another PLA.
Chapter 3 Web Configurator
PLA6457 User’s Guide
19
3.3 G.hn Settings
Your PLA conforms to the G.hn (G.hn) standard for sending data over electrical power wiring in your
home. Use the G.hn screen to change the basic settings of the PLA. Click G.hn to access this screen.
Figure 9 G.hn Screen
The following table describes the labels in this screen.
Table 6 G.hn Screen
LABEL DESCRIPTION
Basic Settings
MAC address This field displays the MAC address of your PLA. The MAC address of your PLA can be found by
looking at the label on your device. It consists of six pairs of hexadecimal characters
(hexadecimal characters are “0 – 9” and “a – f”). In the case of the PLA, this label is on the back
of the device.
Device ID Every PLA acts as the DOMAIN_MASTER by default before connecting to another PLA. The
default Device ID is 1.
After you press the ENCRYPT button to connect your PLA to another PLA, the two PLAs will
determine which one acts as the DOMAIN_MASTER. This field displays 1 when your PLA is the
DOMAIN_MASTER. It displays 2 when your PLA is the END_POINT (see the Force node Type field in
this table for more information).
Note: When none of the PLA works as the DOMAIN_MASTER in the network, you can
manually configure your PLA as the END_POINT by selecting END_POINT in the
Force node Type field. The Device ID will be set to 0.
Produkt Specifikationer
| Mærke: | ZyXEL |
| Kategori: | Powerline adapter |
| Model: | PLA6457 |
Har du brug for hjælp?
Hvis du har brug for hjælp til ZyXEL PLA6457 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Powerline adapter ZyXEL Manualer
24 August 2024
8 August 2024
4 August 2024
1 August 2024
30 Juli 2024
28 Juli 2024
28 Juli 2024
28 Juli 2024
9 Juli 2024
Powerline adapter Manualer
- ICIDU
- Hamlet
- Medion
- Strong
- Sabrent
- Comtrend
- D-Link
- Readynet
- Hirschmann
- Manhattan
- Eero
- Devolo
- Renkforce
- Sitecom
- Mikrotik
Nyeste Powerline adapter Manualer
12 Januar 2025
30 December 2025
30 December 2025
29 December 2024
23 December 2024
23 December 2024
19 December 2024
19 December 2024
6 Oktober 2024
6 Oktober 2024