3M 2529 Manual

3M Tang 2529

Læs gratis den danske manual til 3M 2529 (8 sider) i kategorien Tang. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om 3M 2529, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

1.0 General

1.1 The 3M™ Fibrlok™ II Universal Optical Fiber Splice

2529 provides permanent mechanical splices for

singlemode or multimode fiber having 125 µm

diameter cladding. The 2529 universal splice is

designed to accommodate any combination of fibers

with coating diameters from 250 µm to 900 µm.

1.2 All 2529 splices are gray in color and are marked

with the 3M Fibrlok II logo on the splice cap.

1.50" (38.1 mm)

0.250"

(6.4 mm)

.150"

(3.8 mm)

Jacket

Cap

End Plug

(each end)

Fiber Entry Port

(each end)

April 2015

78-8128-0163-3-G 3

3M™ Fibrlok™ II Universal Optical

Fiber Splice 2529

Instructions

2 78-8128-0163-3-G

1.4 Tools and Materials Required are as follows:

• 3M™ Fibrlok™ Assembly Tool 2501

• Plastic coating (buffer) stripper

• Reagent-grade isopropyl alcohol

• Lint-free wipes

• Cleaver

• 3M Fibrlok II video instructions (optional)

• 3M Fibrlok Tool Kit (optional)

1.5 Some compatible 3M Fiber Splice Tray product

numbers are: 2522, 2524, 2523, 2527

2.0 Splicing Set-Up

2.1 The splicing area should be clean, dry and well-

lit. A clean, well-organized splicing area will

improve splice efficiency and minimize the risk of

contamination of fibers or splices.

2.2 Open the buffer tubes, expose and clean the fibers

per your company practice.

Note: Storage, use and disposal of isopropyl alcohol

should be per your company health, safety and

environmental instructions. Refer to solvent label

or Safety Data Sheet.

2.3 See Section 6.0 for recommended procedures for

fiber organization and splice storage.

1.3 3M™ Fibrlok™ Assembly Tool 2501

Fiber Alignment

Guides (2)

Toggle Arm

Fiber Retention

Pad

Splice Holding Cradle

Mounting Holes (4) Base

Toggle Arm

Fiber Retention

Pad

Fiber Cleave Length

Gauge (both ends of tool)

Finger Cutout

Instruction Label (2)

Pivoted Handle

(shown open)

Produkt Specifikationer

Mærke:	3M
Kategori:	Tang
Model:	2529

Har du brug for hjælp?

Hvis du har brug for hjælp til 3M 2529 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tang 3M Manualer

28 Juli 2024

30 April 2024

10 December 2023

31 Marts 2023

Tang Manualer

Nyeste Tang Manualer

Scarlett SC-HS60599 Manual

8 December 2024

Scarlett SC-HS60T60 Manual

8 December 2024

Scarlett SC-HS60T50 Manual

8 December 2024

Extron CTU 45 Manual

5 September 2024

Scarlett SC-HS60T52 Manual

4 September 2024

Fixpoint 77124 Manual

1 September 2024

Fixpoint WZ CRIMP 09 Manual

1 September 2024

Scarlett SC-HS60604 Manual

30 August 2024

Scarlett SC-HS60505 Manual

29 August 2024

Weidmüller SE HD 160 Manual

27 August 2024