4ms EnvVCA Manual

4ms Ikke kategoriseret EnvVCA

Læs gratis den danske manual til 4ms EnvVCA (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4 anmeldelser. Har du et spørgsmål om 4ms EnvVCA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
EnvVCA
4ms Company
User Manual 1.0 – October 30, 2022
The EnvVCA is an analog envelope generator, slew limiter, and VCA.
EnvVCA features:
•Versatile linear envelope generator/LFO
•Low-noise, low-distortion, DC-coupled exponential VCA
•100% analog
•Sliders, switches and Time CV jack control Rise and Fall times
•100 s (10kHz) to over 30 minutes µ
•With sliders and switches only: ~1.25ms (800Hz) to over 2 minutes
•Independent attenuverters for Rise and Fall time
•Blue/red LEDs indicate strength and polarity
• Cycle button for looping envelopes (LFO)
• Trigger input jack fires a one-shot envelope
• Cycle gate input jack toggles cycling
• EOR (End of Rise) gate output can be used to chain and sequence events
• Env Level slider controls output level of the Env jack without changing the VCA volume
• Audio In and Out jacks for passing audio or CV through the VCA
• VCA gain internally connected to envelope output
• Follow input jack allows for slew limiting, sustain (ASR), and exotic filtering effects
• Re-trig jumper allows for re-triggering during rise phase
Table of Contents
Setting up your EnvVCA
1. Power off your Eurorack system.
2. On the back of the EnvVCA you will see a 10-pin header. The 10-pin
header connects to a Eurorack power header using the included
power cable. Connect the 16-pin end of the power cable to a 16-pin
Eurorack power header on your power supply distribution board and
the 10-pin end to the with the red stripe on the power cable EnvVCA
oriented towards the bottom of the module.
3. Using the included screws, securely attach the EnvVCA to the rails
of your case.
4. Power on your Eurorack system.
Note: The EnvVCA is reverse-polarity protected, but incorrectly
connecting any module in any system can damage other modules on
the power bus.
Setting up your EnvVCA! "........................................................................................2
Controls and Jacks! "................................................................................................3
Patch: Making Notes! ".............................................................................................5
Making Notes (basic)! ".......................................................................................5
Making Notes Using External Triggers! ".............................................................5
Patch: Ratcheting! "..................................................................................................6
Ratcheting! "........................................................................................................6
Advanced Ratcheting! ".......................................................................................6
Rise and Fall Time Ranges! "....................................................................................7
Creating Envelopes (Trigger, Cycle, Follow)! "...........................................................7
Triggering with RETRIG Jumper Off (Factory Default)! ".....................................7
Triggering with RETRIG Jumper On! ".................................................................7
Cycle Button/Jack! "...........................................................................................8
Follow Jack with Gates! "....................................................................................8
Fundamentals of the Follow Jack! "..........................................................................9
Creating ASR and ADSR Envelopes! "......................................................................9
ASR envelope! "..................................................................................................9
ADSR envelope! "..............................................................................................10
Audio filter! "......................................................................................................11
Portamento/glide! "...........................................................................................11
Generating Exponential and Logarithmic Envelopes! "...........................................11
RETRIG Jumper! "...................................................................................................12
VCA Min Gain Trim pot! "........................................................................................12
Electrical and Mechanical Specifications!............................................................12
Page of 2 12

Produkt Specifikationer

Mærke: 4ms
Kategori: Ikke kategoriseret
Model: EnvVCA

Har du brug for hjælp?

Hvis du har brug for hjælp til 4ms EnvVCA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret 4ms Manualer

4ms

4ms Listen Up Manual

1 Oktober 2024
4ms

4ms Buff Mult Manual

22 September 2024
4ms

4ms Catalyst Sequencer Manual

2 September 2024
4ms

4ms Looping Delay Manual

23 August 2024
4ms

4ms Sampler Manual

23 August 2024
4ms

4ms VCA Matrix Manual

15 August 2024
4ms

4ms Ensemble Oscillator Manual

11 August 2024
4ms

4ms Pod 34X Manual

2 August 2024
4ms

4ms Rotating Clock Divider Manual

31 Juli 2024
4ms

4ms QCD Expander Manual

26 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox

AmpliVox Airvox SW695 Manual

15 Juni 2025
Stiga

Stiga SBC 635 KD Manual

15 Juni 2025
Cleveland

Cleveland 36CGM300 Manual

15 Juni 2025
Gourmia

Gourmia GTF7970 Manual

15 Juni 2025
Planet Audio

Planet Audio P9630B Manual

15 Juni 2025
ORNO

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025
Lavex

Lavex 842CD12VST12 Manual

15 Juni 2025
Marshall

Marshall RCP-PLUS Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner BassForce XL Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025