4ms Stereo Triggered Sampler Manual

4ms Ikke kategoriseret Stereo Triggered Sampler

Læs gratis den danske manual til 4ms Stereo Triggered Sampler (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om 4ms Stereo Triggered Sampler, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Stereo Triggered Sampler

4ms Company

User Manual 1.0 – August 16, 2017

for f irmware v1.0

The Stereo Triggered Sampler is a high fidelity, two-channel stereo audio recorder and playback module. The

STS can record high quality stereo WAV files while simultaneously playing two different stereo files. A maximum of

600 samples can be loaded at one time from the removable/swappable microSD card, in a variety of formats up to

96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are

CV controllable, and trigger jacks for play, record, and reverse allow for synchronization. On-board editing tools

allow you to set loop/trim points and gain, as well as assigning samples to banks and slots.

•Two independent stereo playback channels can play any of 600 samples simultaneously

•Recording channel creates stereo WAV files directly onto microSD Card for immediate use

•Extremely low noise, high fidelity design

•Plays a variety of WAV files up to 32-bit/96kHz

•Intelligent file system makes loading large sample libraries easy by organizing banks into folders

•CV and controls for 1V/oct tracking, Start Position, Length, Sample selection, Reverse and Play

•Trim samples and set Loop points, adjust gain, and re-organize banks and sample slots on the fly.

•Includes microSD card with Sample Pack, SD adaptor, 10-to-16 pin power cable and M3 screws

Table of Contents

Setting up your Stereo Triggered Sampler

1. Remove the Stereo Triggered Sampler (STS) from the box and anti-static bag. The RAM chip on the STS may

be damaged by static electricity; take care not to touch the circuit board.

2. Connect the free end of the power cable to a 16-pin Eurorack power header on your power supply distribution

system, with the red stripe towards to the -12V. The other end of the power cable is a

10-pin connector which should already be connected to the STS so the red stripe on

the power cable is orientated towards the bottom of the module (the bottom is marked

by a white stripe and the word “POWER”). Note: The STS is reverse-polarity

protected, but other modules being incorrectly connected could damage anything on

the power bus.

3. Backup your microSD card before you first power the STS on! We recommend

you perform a full backup of the microSD card by using a computer (use the included

SD card adaptor if needed). This will be useful if the card ever becomes damaged or

you wish to restore the STS to the original factory settings and samples.

4. Securely screw the STS to the rails of your case. Power the system on.

5. Begin with Tutorial 1: Basic Playback on page 5 of this manual.

Never remove the microSD card when the light is on!Busy !

Setting up your Stereo Triggered Sampler 2! ".............................................................

Overview 3! "................................................................................................................

Electrical and Mechanical Specifications 4! "..............................................................

Tutorial 1: Basic Playback 5! "......................................................................................

Tutorial 2: Navigating Banks 6! "..................................................................................

Stereo/Mono Mode 8! "................................................................................................

Channel Playback Volume 8! ".....................................................................................

Tutorial 3: Recording Samples 9! "...............................................................................

Tutorial 4: Loading Files onto the microSD Card 10! ".................................................

Sample List HTML file 12! "..........................................................................................

Edit Mode: Gain, Loop/Trim points 13! "......................................................................

Saving and Reverting 14! "...........................................................................................

Copying 14! "................................................................................................................

Tutorial 5: Creating Slices 15! "....................................................................................

Example Patch: Sequencing the STS 16! "..................................................................

Example Patch: Granular Scrubbing 17! "...................................................................

Recording the STS Output as a New Sample 18! ".....................................................

Example Patch: Clock Sync and Shifting Ping-Pong Loops 18! "...............................

Assigning Samples to Banks and Slots 19! "...............................................................

System Mode 21! ".......................................................................................................

1V/OCT Tracking Compensation 21! ".........................................................................

Rebuilding the Index File 21! ".....................................................................................

Updating Firmware (Audio Bootloader) 22! "...............................................................

microSD Card Specifications 23! "...............................................................................

File Formats 23! ".........................................................................................................

Chart of All Button Features 24................................................................................!

Page of  2 24

Produkt Specifikationer

Mærke:	4ms
Kategori:	Ikke kategoriseret
Model:	Stereo Triggered Sampler

Har du brug for hjælp?

Hvis du har brug for hjælp til 4ms Stereo Triggered Sampler stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret 4ms Manualer

4ms Listen Up Manual

1 Oktober 2024

4ms Buff Mult Manual

22 September 2024

4ms Catalyst Sequencer Manual

2 September 2024

4ms Looping Delay Manual

23 August 2024

4ms Sampler Manual

23 August 2024

4ms VCA Matrix Manual

15 August 2024

4ms Ensemble Oscillator Manual

11 August 2024

4ms Pod 34X Manual

2 August 2024

4ms Rotating Clock Divider Manual

31 Juli 2024

4ms QCD Expander Manual

26 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025