Vaxcel T0770 Manual

Vaxcel Ikke kategoriseret T0770

Læs gratis den danske manual til Vaxcel T0770 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vaxcel T0770, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0770

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read

and save these instructions.

Page 1 / 2

Turn off the power at fuse or circuit box.

Turn on the power at fuse or circuit box.

Installation Steps

240719

Hardware Package (included):

Wire Connector (C)

Mounting Screw (B)

Mounting Strap Unit (A)

Bolt Nut (D)

Rubber Pad (E)

Outlet Box

House Ground Wire

Wire Connector (C)

Fixture Mounting Screw

Mounting Strap Unit (A)

Green Ground Screw

Lock Nut

Mounting Screw (B)

Canopy

Rubber Pad (E)

Bolt Nut (D)

Socket

Shade

Socket Ring

Max. 60W Type A Bulb

(not included)

1. Unscrew the two bolt nuts (D), remove the two rubber pads (E)

and the mounting strap unit (A) from the canopy.

2. Attach the mounting strap unit (A) to the outlet box by using two

mounting screws (B).

Adjust the length of the preinstalled

fixture mounting screws if necessary.

Pull out the source wires from the outlet box. Make wire

connections using wire connectors (C) as follows:

• Connect the hot wire (black insulation) from the fixture

to the black wire from the power source.

• Connect the neutral wire (white insulation) from the

fixture to the white wire from the power source.

• Attach the fixture ground wire (bare wire) to the

mounting strap unit (A) with the green ground screw,

then depending on local code, then connect it to the

house ground wire with the wire connector (C).

Carefully put all of the wires back into the outlet box.

Attach the canopy to the mounting strap

unit (A)

by inserting the fixture mounting screws, and then secure it

with two rubber pads

(E)

and two bolt nuts

(D)

5. Attach the shade to the socket, then secure it with the socket ring.

6. Install the bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed .

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Ikke kategoriseret
Model:	T0770

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel T0770 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vaxcel Manualer

19 December 2025

19 December 2025

19 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

Vaxcel Hyde Park T0470 Manual

18 December 2025

Vaxcel OW21861 Manual

18 December 2025

Vaxcel T0589 Manual

18 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

TOTO Vivian TS220E Manual

19 December 2025

WAC Lighting H-1014 Manual

19 December 2025

WAC Lighting HT4 Manual

19 December 2025

WAC Lighting R4RD2T Manual

19 December 2025

Televés NevoSwitch 714603 Manual

19 December 2025

Vonroc S3_JS506DC Manual

19 December 2025

Peloton Altos Manual

19 December 2025

Arçelik A55L 8840 5B Manual

19 December 2025

Fulgor Milano FEHCPK 4805 ID Manual

19 December 2025

Akasa Newton A-NUC83-M1B Manual

19 December 2025