4ms WAV Recorder Manual

4ms Ikke kategoriseret WAV Recorder

Læs gratis den danske manual til 4ms WAV Recorder (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om 4ms WAV Recorder, eller vil du spørge andre brugere om produktet?

Side 1/15
WAV Recorder
4ms Company
User Manual 1.0.1 – June 27, 2018
for f irmware v1.0
The WAV Recorder from 4ms Company is a high fidelity, two-channel stereo audio recorder with basic playback
features. Accepting a wide range of input signals, from line-level to modular-level, the WAV Recorder stores
audio onto a microSD card in lossless .wav format up to 96kHz/24-bit. The trigger jack can be used for capturing
rhythmic loops or synchronizing multiple WAV Recorder Playback modules for multi-track recording. In mode,
the trigger jack or button plays the most recent recording. A simple file/folder navigation system can be used to
browse the folders on the card for playing back .wav files. A knob allows for up to +20dB of boost, and an Gain
LED Signal Meter indicates clipping and the signal level.
Records up to 96kHz/24-bit, creating stereo or mono .wav files on the microSD card
Gain knob and LED level meter make it easy to record a wide range of signal levels
Plays standard .wav files from the card, without renaming files
Browse any folder on the card for playback
Card can be hot-swapped without rebooting module
Extremely low noise, high-fidelity design
Includes 16GB microSD card (Class 10), SD adaptor, 10-to-16 pin power cable and M3 screws
Can be used as a stereo pre-amp (line to modular level), providing up to +20dB of gain
Record
WAV RECORDER
Left Right
IN
OUT
Clip
Input Gain
Busy
Playback
Record
0dB
-+20dB
Table of Contents
!
Setting up your WAV Recorder
1. Power your Eurorack modular case off and find 6HP of available space.!
2. Connect the free end of the power cable to a 16-pin Eurorack power header on
your power supply distribution system, with the red stripe towards to the -12V.
The other end of the power cable is a 10-pin connector which should already be
connected to the WAV Recorder with the red stripe on the power cable orientated
towards the bottom of the module. Note: The WAV Recorder is reverse-polarity
protected, but other modules being incorrectly connected could damage
anything on the power bus.
3. Using the included Knurlie screws, securely fasten the WAV Recorder to the rails
of your case. !
4. Power the system on.!
5. Begin with Tutorial: Basic Recording on page 4 of this manual."
Setting up your WAV Recorder 2# !..............................................................................
Controls: Button, Knob, Switch and Jacks 3# !............................................................
Tutorial: Basic Recording 4# !.......................................................................................
Folders and File Organization 5# !................................................................................
Playback 5# !................................................................................................................
Browsing Files for Playback 6# !...................................................................................
Trigger Jack 7# !...........................................................................................................
Pausing Recording 7# !.................................................................................................
Example Patch: Multi-track Recording 8# !..................................................................
Using the WAV Recorder as a Pre-amp 9# !.................................................................
Busy Light 9# !..............................................................................................................
Checking for Free Space 9# !.......................................................................................
Hot Swapping the microSD Card 10# !........................................................................
LED Signal Meter and Clipping 10# !............................................................................
Recording For Long Periods 10# !................................................................................
System Mode 11# !.......................................................................................................
Recording Rates and Selecting microSD Cards 12# !..................................................
Checking the Firmware Version 13# !...........................................................................
Updating Firmware (Audio Bootloader) 13# !...............................................................
microSD Card 14# !......................................................................................................
Electrical and Mechanical Specifications 15# !............................................................
Jumpers 15...............................................................................................................#
Page of  2 15
Important!
Never remove the microSD card when the
Busy light is on. This could corrupt the files on
the card.
If you remove the Wav Recorder from your
case, a store and transport it in the lways
included anti-static bag.


Produkt Specifikationer

Mærke: 4ms
Kategori: Ikke kategoriseret
Model: WAV Recorder

Har du brug for hjælp?

Hvis du har brug for hjælp til 4ms WAV Recorder stil et spørgsmål nedenfor, og andre brugere vil svare dig