Access Lighting Cobra 52204 Manual

Access Lighting Ikke kategoriseret Cobra 52204

Læs gratis den danske manual til Access Lighting Cobra 52204 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Access Lighting Cobra 52204, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
IMPORTANT
Before assembling your access lighting fixture, please make sure that
you carefully read through these instruction sheets. Consider having
your fixture installed by a qualified licensed electrician.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care, are factors that can’t be built into any product. These factors must
be supplied by the person(s) caring for and operating the fixture.
Before starting your installation disconnect the Power by turning off the
Circuit Breaker or by removing the fuse at the fuse box. Just turning the
k.
PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wire from the outlet box .
Secure the crossbar to the J-box with the supplied screws.
Ensure that the additional screws face downward.
GENERAL INFORMATION
All electrical connections must be in accordance with all ordinances,
Local and National Electrical Codes. These fixtures are intended for
mounting to a standard 4” x 2 1/2”metal octagon outlet box. The box
must be directly supported the building structure and U.L. Recognized.by
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
•
4 x 50W GU10 Bulb
INSTALLATION INSTRUCTIONS
WHAT WE PROVIDE
•
Crossbar
•
Mounting Hardware
•
Canopy with track
•
4 x socket rings
COLLECTION
CERTIFICATION: ETL DRY NO. 52204
Cobra 52204
APPLICATION MODEL NO.
Wall and Ceiling
CERTIFICATION: ETL DRY NO. 52204
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied screws.
INSERT THE BULBS
Insert the bulbs .
MAXIMUM WATTAGE 50W.
DO NOT EXCEED THE RECOMMENDED WATTAGE AS
STATED ON THE WARNING LABEL AND
INSTRUCTION SHEETS.
SECURE THE SOCKET RING
Place the socket ring over the bulb and secured
with supplied screws.
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wires to the white fixture wire. Secure with the
supplied wire nuts. Either wrap the green wire around
one of the protruding screws or connect it to the supply
ground wire. Secure all wires with U.L. Certified electrical
tape (not supplied).
Tuck all wires carefully into the J-Box.

Produkt Specifikationer

Mærke: Access Lighting
Kategori: Ikke kategoriseret
Model: Cobra 52204

Har du brug for hjælp?

Hvis du har brug for hjælp til Access Lighting Cobra 52204 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Access Lighting Manualer

Access Lighting

Access Lighting Cobra 52204 Manual

28 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

EXSYS

EXSYS EX-44352IS-4K Manual

28 Juni 2025
YA-MAN

YA-MAN Scalp Lift Active Plus Manual

28 Juni 2025
Javalo Elf

Javalo Elf VINTAGE Collection JE-P03V Manual

28 Juni 2025
Lorelli

Lorelli Digital Soother Thermometer Manual

28 Juni 2025
Hoshizaki

Hoshizaki F-2001MRJZ Manual

28 Juni 2025
Hoshizaki

Hoshizaki Steelheart HC2A-FS-FS Manual

28 Juni 2025
DataVideo

DataVideo OBV-4000 Manual

28 Juni 2025
Hoshizaki

Hoshizaki Steelheart HC1A-FS-FS Manual

28 Juni 2025
Arturia

Arturia MicroLab MkIII Manual

28 Juni 2025
OmniMount

OmniMount VideoBasics VCS Manual

28 Juni 2025