ACTi A711 Manual

ACTi Ikke kategoriseret A711

Læs gratis den danske manual til ACTi A711 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om ACTi A711, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

A711 Outdoor Hemispheric Dome Quick Installation Guide

The Quick Guide is for quick installing connecting the Outdoor Hemispheric Dome Camera. For more details, please refer to the User’s Manual of the camera.and

Installation Notices

• This camera must be installed by qualified personnel and the installation should conform to all local codes.

• Do not replace batteries of the camera. Risk of explosion may occur if the battery is replaced by an incorrect type.

• Leaving a camera in an extremely high temperature surrounding environment can result in an explosion or the

leakage of flammable liquid or gas.

• Camera subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or

gas.

• Use only power supply and other accessories recommended by the manufacturer.

• The power cord of the adapter should be connected to a socket-outlet with earthing connection.

Camera Overview

No.

Connector

Definition

Remarks

Audio I/O

Pink

Audio In (Line In)

Two-way audio transmission

Green

Audio Out (Line Out)

Alarm I/O

(4-Pin Terminal

Block)

Alarm In –

Alarm connection

* Do connect external power NOT

supply to the alarm I/O connector of

the camera.

Alarm In +

Alarm Out –

Alarm Out +

Power (DC 12V)

(2-Pin Terminal

Block)

Black

DC 12V –

Power connection

Red

DC 12V +

RJ-45

For network and PoE connections

microSD Card Slot

Insert the microSD card into the card slot to store videos and snapshots.

Do not remove the microSD card when the camera is powered on.

Reset Button

Press the button with a proper tool for at least 20 seconds to restore the

system.

NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to

support long term continu s data read/write. Please contact the manufacturer of the microSD card for ou

information regarding the reliability and the life expectancy.

Camera Cabling

Please follow the instructions below for cable connections.

Power Connection

Please use a DC 12V power adaptor and plug it to the camera and the power outlet. Alternatively, users can use an

Ethernet cable and connect it to the RJ-45 connector of the camera and a Power Sourcing Equipment (PSE) switch.

NOTE: If the device is powered over Ethernet, make sure the PSE is connected to the network.

Ethernet Cable Connection

Connect one end of the Ethernet cable to the - connector of the camera, and plug the other end of the cable to RJ 45

the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the

PC.

NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check

the LAN connection.

Green Power LED : Lights up when the camera is powered up.

Orange Network LED (1) flashes when data is being transmitted over network,:

(2) lights up for good network connection.

NOTE: The ITE is to be connected only to PoE networks without routing to the outside plant or equivalent

description.

Before Login to the Camera

A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the

camera, ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and plug-ins or

setting Internet’s security level to default.

ActiveX Controls and Plug-ins Settings

Internet Security Level

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>, and click on <Custom level> to

change ActiveX settings.

Step 4: Set “ActiveX controls and plug-ins” items to

<Prompt> or <Enable>.

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>.

Step 4: Down the page, click <Default Level> and click

on <OK> to confirm the setting. Close the

browser window, and open a new one later for

accessing the IP camera.

Produkt Specifikationer

Mærke:	ACTi
Kategori:	Ikke kategoriseret
Model:	A711

Har du brug for hjælp?

Hvis du har brug for hjælp til ACTi A711 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret ACTi Manualer

ACTi INR-415 Manual

9 Oktober 2025

ACTi R71CF-38 Manual

8 Oktober 2025

ACTi TVW-301 Manual

8 Oktober 2025

ACTi PMAX-0318 Manual

8 Oktober 2025

ACTi VMGB-405 Manual

8 Oktober 2025

ACTi INR-413 Manual

8 Oktober 2025

ACTi PMAX-0706 Manual

8 Oktober 2025

ACTi MGB-150 Manual

8 Oktober 2025

ACTi Q963 Manual

8 Oktober 2025

ACTi PMAX-0810 Manual

8 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Delta UNISAW 36‑L536 Manual

8 December 2025

Pioneer 2AM401 Manual

8 December 2025

Topex 82S220 Manual

8 December 2025

Klarfit Sea Mule Manual

8 December 2025

Bosch WAV28M80GC Manual

8 December 2025

ClearOne CONVERGE Pro Manual

8 December 2025

Lincoln Electric Spreadarc Manual

8 December 2025

NEO Tools 57-626 Manual

8 December 2025

Bosch SMP6ZCW71S Manual

8 December 2025

JET JAT-500 Manual

8 December 2025