Adastra AT6 Manual

Adastra Højttaler AT6

Læs gratis den danske manual til Adastra AT6 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Adastra AT6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AT6

6-Zone 100V Attenuator & Source Selector

Item ref: 2.476 95 UK

User Manual

Version 1.0

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

952.476UK User Manual

Introduction

Thank you for choosing the Adastra AT6 attenuator and source selector as part of your public address system.

This unit is designed to offer a completely passive zone control ution for installed 100V public address systems. sol

Please read this manual to gain the best results from your product and avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC

ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

Important not e: ic

The AT6 is designed for 100V speaker systems and is not suitable for low impedance 4/8/16 speakers. Ω

Although not mains powered, the 100V rating of this product requires standar high voltage precautions to be observed. d

Take care when making connections to avoid any shorted wires, which could cause damage to the amplifiers or the AT6.

Each output of the AT6 has a maximum power rating of 30W. Ensure that the combined tapped power of speakers

connected to a single output do not exceed 30W. es

Safety

• If liquids are spilled on the casing, stop using the AT6 immediately, allow the unit to dry out and have checked by

qualified personnel before further use.

• Avoid impact, extreme pressure or heavy vibration to the case

• No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

• Use double insulated speaker wire with adequate current rating for the 100V speaker connections

Placement

• Keep out of direct sunlight and away from heat sources

• Keep away from damp or dusty environments

• Ensure adequate access to controls and connections

Cleaning

• Use a soft cloth with a neutral detergent to clean the casing as required

• Do not use strong solvents for cleaning the unit

Installation

The AT6 may be installed into a standard 1U rack space in a 19 rack cabinet. ”

Alternatively, the AT6 may be used free-standing.

Ensure adequate support for the unit and access connectors, terminals and controls. to

Do not place heavy objects on top of the AT6 that may cause excessive strain on the housing.

Produkt Specifikationer

Mærke:	Adastra
Kategori:	Højttaler
Model:	AT6

Har du brug for hjælp?

Hvis du har brug for hjælp til Adastra AT6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Adastra Manualer

Adastra WA-215 Manual

16 August 2024

Adastra F40V Manual

15 August 2024

Adastra SC32V Manual

15 August 2024

Adastra 952.613UK Manual

15 August 2024

Adastra 952.615UK Manual

14 August 2024

Adastra 952.612UK Manual

13 August 2024

Adastra FSV-B Manual

13 August 2024

Adastra AH25 Manual

13 August 2024

Adastra 952.618UK Manual

13 August 2024

Adastra 952.614UK Manual

13 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

LENRUE A2 Manual

15 Juni 2025

Sony BRAVIA Theatre Bar 6 Manual

15 Juni 2025

Hecate G1500 SE Manual

15 Juni 2025

Edifier MP330 Manual

15 Juni 2025

Hecate G1500 Manual

14 Juni 2025

XLEADER SoundAngel A8 Manual

14 Juni 2025

RCF DU 31EN Manual

14 Juni 2025

Omnitronic PS-2.5WB Manual

14 Juni 2025

Greadio R-919 Manual

14 Juni 2025

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025