IWA-series In-Wall Amplifiers User Manual
Introduction
Thank you for choosing Adastra IWA-series in-wall amplifier for your discreet audio an
installation. This unit is designed to power wall or ceiling mounted speakers and receive
audio via Bluetooth, optical or aux input. Please read this manual to gain the best results
from your product and avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If
liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service – –
personnel.
Safety
• Check for correct mains voltage before connecting power to the amplifier.
• Use the fig.8 power lead provided or a suitable equivalent.
Placement
• The amplifier n be installed in a ceiling or stud wall to power flush or surface mount speakers. ca
• The amplifier can also be surface mounted if necessary.
• Ensure adequate ventilation for cooling and keep away from combustible material or moisture.
• Ensure that the amplifier is within Bluetooth connection range of the sending device.
Cleaning
• Use a soft cloth with a neutral detergent to clean the housing as required.
• Use a vacuum cleaner to clear apertures and controls of any dust or debris bu - . ild up
• Do not use solvents for cleaning the unit.