Adesso NuScan 2600U Manual (95 Sider)

- 1 -

USER GUIDE

- 2 -

About This User Guide

Pls read all the content of the user guide carefully to use the products safely and effectively.

You are advised of keeping it properly for your using reference.

Disclaimer

Please do not dismantle the product or tear up the seal on it, otherwise we won’t

provide warranty or replacement service.

The pictures in this user guide are for reference only. If there are any pictures which

not match the actual product, please take actual products as the standard. Updated

information is subject to change without notice.

All information contained in this guide are protected by copyright, and our company

reserves all rights. All or part of this guide is prohibited to excerpt, copy, bundle other

products, or sell without the written permission from us.

Service Information

For technical assistant or product service and repair, please contact us.

- 3 -

Version Record

Version number

Version description

Version date

SV1.1_HV1.2_190330_201903

30d024-190330

Initial version

2019-4-15

SV1.1_HV1.2_190330_d025

Modified the gs128 menu, the default is invalid

2019-4-16

SV1.1_HV1.2_190330_d027

1. Modified the 39full conversion tail C error;

2. Modified the 39full conversion is not correct;

3. Modified the setting of switch to USB keyboard

mode, save the parameters before set;

4. Modified the USB to serial port setting successful

voice prompt error;

5. Modified the compatible XP system;

6. Modify the button press until the decoding is

successful or release the button to turn off the light;

7.Increase the USB network mode and

communicate with the host computer through the

USB network mode;

2019-4-17

SV1.3_HV1.2_190330_d027

1. Modify the lighting effect to improve the decoding

effect;

2. Modified the communication between the

compatible USB network and the host computer

except the Win10 system;

2019-4-19

SV1.4_HV1.2_190330_d027

1. Add the function of modifying the IP address,

which can be set by the host computer or scanning

mode.

2. When set to USB network mode, the default IP

2019-4-30

- 4 -

address is 32.45.78.1

SV1.5_HV1.2_190330_d027

1. The default frequency of the sound is changed to

2.7K

2. This version of HS-26.

2019-5-6

SV1.6_ZS_HV1.2_2K7_190330

_d031

1.reatly improve the decoding performance

2. Set the early exit decoding function

3. Modified the callback function lost problem

4. code128 can solve hidden characters, and related

to the menu;

2019-5-23

SV1.7_ZS_HV1.2_2K7_190330

_d031

1.The output code length default is changed to 4-50

2.The maximum sound is changed to 2.7K

2019-5-23

SV1.7_ZS_HV1.2_2.048K_190

330_d031

The maximum sound is changed to 2.048K

2019-5-23

SV1.8_ZS_HV1.2_2.048K_QZ_

190330_d033

1.Increase the hardware watchdog

2. The maximum sound is changed to 2.048K

3. Solve the problem of noise at start-up

4. Because the RTC fails, the callback function

uses the counting method

5.Accelerate the anti-white code

6. Modify the HID send speed

2019-5-30

SV1.8_ZS_HV1.2_2.048K_MZ_

190330_d033

Increase the hardware watchdog

2. The maximum sound is changed to 2.048K

3. Solve the problem of noise at start-up

4. Because the RTC fails, the callback function

uses the counting method

5.Accelerate the anti-white code

2019-5-31

- 5 -

6. Modify the HID send speed

7. Serial output, no terminator, initialized to self-

sensing mode

SV1.9_ZS_HV1.2_2K7_QZ_19

0330_d033

1.Initialize open anti-white code

2. Can switch to self-sensing mode

2019-6-1

SV1.9_ZS_HV1.2_2.048K_QZ_

190330_d033

1.Initialize open anti-white code

2. Can switch to self-sensing mode

2019-6-1

SV2.0_ZS_HV1.2_2.048K_MZ_

190330_d033

Add the aging test mode

2019-6-5

SV2.0_ZS_HV1.2_2K048_QZ_

190605_d037

1.PDF optimization

2.DM optimization

3. QR high density optimization

4. QR code crash problem

5. PDF corner decoding problem

2019-6-10

2.2.7 Scan Mode 
................................................................................................................................. - 21 - 
 
- 7  - 
 
Catalogue 
 
目录 
1、Product Introduction ..................................................................................................................................... - 13 - 
 
1.1 Main feature 
.......................................................................................................................................... - 13 - 
 
1.2 Unpack your device
.............................................................................................................................. - 13 - 
 
1.3 Communication port 
............................................................................................................................. - 14 - 
 
1.4 Start-up, shutdown, standby and restart 
........................................................................................... - 14 - 
 
1.5 Maintenance
.......................................................................................................................................... - 14 - 
 
1.6 Reading skills 
........................................................................................................................................ - 15 - 
 
2、Barcode Setting
............................................................................................................................................. - 16 - 
 
2.1 Mark Setting
........................................................................................................................................... - 16 - 
 
2.2Basic Setting Barcodes
......................................................................................................................... - 16 - 
 
2.2.1 Turn on/Turn off configuration code
........................................................................................ - 16 - 
 
2.2.2  Restore Factory Defaults
....................................................................................................... - 17 - 
 
2.2.3 Read product batch version 
..................................................................................................... - 17 - 
 
2.2.4 Read user defaults 
.................................................................................................................... - 17 - 
 
2.2.5 Interface Setting 
........................................................................................................................ - 18 - 
 
2.2.6 Serial port setting
....................................................................................................................... - 19 -

2.3.8 Error sound
................................................................................................................................. - 31 - 
 
- 8  - 
 
2.2.8 Lighting Control
.......................................................................................................................... - 22 - 
 
2.2.9 Aiming light control 
.................................................................................................................... - 22 - 
 
2.2.10 Illumination
................................................................................................................................ - 23 - 
 
2 . 2. 1 1 
GS Control character substitution(Enable character escape first) 
......................................... - 23 -
 
2.2.12  Start character setting 
.......................................................................................................... - 24 - 
 
2.2.13 Ending character setting 
......................................................................................................... - 24 - 
 
2.2.14 Chinese output mode 
.............................................................................................................. - 25 - 
 
2.2.15  Invoice (For China) 
............................................................................................................... - 26 - 
 
2.2.16 Invoice type (for China) 
.......................................................................................................... - 27 - 
 
2.2.17 Inverse code option 
................................................................................................................ - 27 - 
 
2.2.18 virtual keyboard 
....................................................................................................................... - 27 - 
 
2.3 Beeper, LED notifications and Vibration prompt setting barcode
.................................................. - 28 -
 
2.3.1 Beeper Volume setting 
.............................................................................................................. - 28 - 
 
2.3.2  Start-up beep
........................................................................................................................... - 29 - 
 
2.3.4 Good read beep
......................................................................................................................... - 29 - 
 
2.3.6 Good read Prompt audio rate (tone) 
...................................................................................... - 30 - 
 
2.3.7 beep duration-good read 
.......................................................................................................... - 30 -

2.3.9 Good-read LED 
.......................................................................................................................... - 31 - 
2.9.11 Interleaved 2 of 5 
（ITF5）check bit 
.................................................................................... - 42 - 
 
- 9  - 
 
2.4 Timeout between decodes (Same barcodes)（Self-induction mode） 
....................................... - 32 -
 
2.5 USB keyboard update speed setting 
................................................................................................. - 33 - 
 
2.6 OA & LF setting（USB keyboard） 
................................................................................................... - 33 - 
 
2.7 USB keyboard text-transform 
............................................................................................................. - 34 - 
 
2.8 Keyboard layout setting 
....................................................................................................................... - 34 - 
 
2.9 Symbologies
.......................................................................................................................................... - 38 - 
 
2.9.1 enable/disable all symbologies 
................................................................................................ - 38 - 
 
2.9.2 Codabar
...................................................................................................................................... - 39 - 
 
2.9.3 Codabar start/ending character setting 
................................................................................. - 39 - 
 
2.9.4 Codabar limitation of length
..................................................................................................... - 39 - 
 
2.9.5 Code 39 
...................................................................................................................................... - 40 - 
 
2.9.6 Code 39  check bit
................................................................................................................... - 40 - 
 
2.9.7 Code 39 Full ASCII 
.................................................................................................................... - 40 - 
 
2.9.8 Code 39  limitation of length 
.................................................................................................. - 41 - 
 
2.9.9 Code 32 (Code 39 needs to be enabled）
（Not Enabled） ............................................. - 41 - 
 
2.9.10 Interleaved 2 of 5  （ITF5） 
................................................................................................... - 41 -

2.9.12 Interleaved 2 of 5 
（ITF5）length setting
............................................................................ - 42 - 
2.9.31 Plessey 
....................................................................................................................................... - 50 - 
 
- 1 0 
 
2.9.13 Interleaved 2 of 5 Limitation of length 
.................................................................................. - 44 - 
 
2.9.14 Industrial 2 of 5 (Industrial 25code)（4-24bit）
................................................................... - 44 - 
 
2.9.15 Industrial 2 of 5 Limitation of length 
...................................................................................... - 44 - 
 
2.9.17 Matrix 2 of 5 Limitation of length 
........................................................................................... - 45 - 
 
2.9.19 Standard 25
Limitation of length 
............................................................................................. - 45 - 
 
2.9.20 
Standard 25 check bit 
............................................................................................................. - 46 - 
 
2.9.21 Code 93
..................................................................................................................................... - 46 - 
 
2.9.22 Code 93 Limitation of length 
................................................................................................. - 47 - 
 
2.9.23 Code 11（
Not Enabled
） 
....................................................................................................... - 47 - 
 
2.9.24 Code 11 check bit output（
Not Enabled
） 
.......................................................................... - 47 - 
 
2.9.25 Code 11 check bit option（
Not Enabled
） 
.......................................................................... - 48 - 
 
2.9.26 Code 11 Limitation of length（
Not Enabled
）
..................................................................... - 48 - 
 
2.9.27 Code 128
................................................................................................................................... - 48 - 
 
2.9.28 Code 128 Limitation of length 
................................................................................................ - 49 - 
 
2.9.29 GS1-128 
..................................................................................................................................... - 49 - 
 
2.9.30 ISBT-128
.................................................................................................................................... - 49 -

2.9.32 Plessey Limitation of length 
.................................................................................................... - 50 - 
2.9.51 GS1 DataBar Limited
................................................................................................................ - 57 - 
 
- 1 1 
 
2.9.33 Plessey 
check bit optional....................................................................................................... - 50 - 
 
2.9.34 MSI plessey 
.............................................................................................................................. - 51 - 
 
2.9.35 MSI plessey Limitation of length 
............................................................................................ - 51 - 
 
2.9.36 MSI plessey check bit output 
................................................................................................. - 52 - 
 
2.9.37 MSI plessey Check mode selection setting 
........................................................................ - 52 - 
 
2.9.38 UPC-A 
....................................................................................................................................... - 53 - 
 
2.9.39 UPC-A check bit 
...................................................................................................................... - 53 - 
 
2.9.40UPC-A to EAN-13 
..................................................................................................................... - 53 - 
 
2.9.41 UPC-E 
........................................................................................................................................ - 54 - 
 
2.9.42 UPC-E check bit
....................................................................................................................... - 54 - 
 
2.9.43 UPC-E expand UPC-A 
............................................................................................................ - 54 - 
 
2.9.44 EAN/JAN-8
............................................................................................................................... - 54 - 
 
2.9.45 EAN/JAN-13 
............................................................................................................................. - 55 - 
 
2.9.46 UPC/EAN/JAN extra-code 
..................................................................................................... - 55 - 
 
2.9.47 EAN13 to ISBN 
......................................................................................................................... - 55 - 
 
2.9.49 GS1 DataBar（RSS14）(Stacked) 
.......................................................................................... - 56 -

2.9.53 GS1 DataBar Expanded 
.......................................................................................................... - 57 - 
- 1 2 
 
2.9.54 PDF417 
...................................................................................................................................... - 58 - 
 
2.9.56 QR Code
................................................................................................................................... - 58 - 
 
2.9.57 Micro QR 
.................................................................................................................................. - 58 - 
 
2.9.58 Data Matrix
............................................................................................................................... - 59 - 
 
2.10 User-defined prefix setting
................................................................................................................. - 59 - 
 
2.11 User-defined suffix setting 
.................................................................................................................. - 60 - 
 
2.12 
Barcode prefix and suffix order selection ........................................................................................ - 60 - 
 
2.13 Code ID 
................................................................................................................................................ - 61 - 
 
APPENDIX 
........................................................................................................................................................... - 64 - 
 
Appendix 1 data and editing code 
............................................................................................................ - 64 - 
 
Appendix 3 eyeball character ASCII table 
............................................................................................... - 71 - 
 
Appendix 4 eyeball character ASCII table 
............................................................................................... - 74 - 
 
Appendix 5  Default setting table 
............................................................................................................ - 77 - 
 
Appendix 6 operational character (USB keyboard) 
............................................................................... - 88 - 
 
Appendix 7 operational character (serial port and USB-VCOM) 
......................................................... - 91 - 
 
configuration instruction and example ............................................................................................................. - 93 - 
 
Example for Barcode length limit configuration .............................................................................. - 94 - 
 
Example for USB keyboard send speed configuration . ............................................................... - 95 -

- 1 3

1、Product Introduction

This user guide applies to 2600U, which identify 1D&2D barcodes by 2D image

scanning pattern. The scanners above are of strong identification capability, and support

automatic continuous scanning mode with fast and flexible scanning speed.

In this chapter, we will introduce the instruction of scanner with pictures, please compare

to the scanner you bought when reading this user guide, which is good for your understanding.

This chapter applies to regular users, maintenance personnel, and software developers.

1.1 Main feature

* Complete independent research and development, possessing the complete set of

patent, plug and play without the need to install driver.

* Wide voltage design to avoid the data can’t be transmitted due to voltage fluctuation.

* 32-bit master chip equipped with patented software, the scanner can smoothly decode

reflective, wrinkled, blurred, and colorful barcode, and can also normally scan in light and

dark environment.

* Adopt all tantalum capacitors and anti-oxidation optical technology, avoiding the

problem of performance declining after long-term using.

1.2 Unpack your device

After you open the shipping carton containing the product, take the following steps:

•

Take the accessories for scanner out from package.

•

Check with the packing list to see if everything is complete and in good condition.

If there are any damaged or missing components, please keep the original

package and contact your supplier for after-sales service.

- 1 4

1.3 Communication port

The scanner must be connected to a host to operate. Host can be a PC, POS machine,

intelligent terminal with USB or RS-232 interface.

USB

USB interface on host

RS-232

RS-232 interface on

host

1.4 Start-up, shutdown, standby and restart

Start-up：Connect host computer with scanner, which will automatically start-up and in

working state.

Shutdown：Remove the data cable which is connected with scanner; remove the USB

which is connected with host computer; remove the power adapter which is inserted into

RS-232 serial port.

Standby：Scanner with automatic sleep standby function, if 30 minutes without work it will

be in standby mode, but it will automatically start-up when barcode approach.

Restart：If the scanner crashes or doesn't respond, please switch it off and restart.

1.5 Maintenance

*

The window must be kept clean, the supplier do not bear the guarantee responsibility due

to the improper maintenance.

*

Avoid the window being wear and tear or scratched by hard object

- 1 5

*

Use the hairbrush to remove the stain on the window

*

Clean the window with a soft cloth, such as lens cleaning cloth

*

Spraying liquid onto the window is prohibited.

*

Prohibit any cleaning solvents, except for the cleaning water.

1.7 Reading skills

If the barcode is small, it should be closer to the scanning window; if the barcode is

large, it should be far away from the scanning window a little more, thus easier to be read

correctly.

If the barcode is highly reflective (for example, the coated surface), you may need to tilt

the barcode at an angle to successfully scan it.

Barcode scanning example：

Configuration Code Turn on（Default)

- 1 6 -

2、Barcode Setting

This model of laser desktop barcode scanner is designed to change settings by reading some

special barcode, which we will give you a detailed introduction and show you all the barcodes for the

corresponding setting in this section.

The greatest advantage of this setting method is direct, intelligible and user friendly.

2.1 Mark Setting

1

Configuration Code Turn on

2

（default）

This is the mark of Configuration Code Turn on (default)

The logo consists of two parts:

1. Set the barcode part of the code

2. Set the name of the option or function, such as the function to open the configuration

code

2.2Basic Setting Barcodes

2.2.1 Turn on/Turn off configuration code

When the configuration code is turn on, All configuration codes available;

When the configuration code is turn off, you need setting it.

Configuration Code Turn on（Default)

- 1 7 -

Configuration Code Turn on（Default)

Configuration Code Turn off

2.2.2 Restore Factory Defaults

Restore Factory Defaults

2.2.3 Read product batch version

pr od uc t ba tc h v er s i o n

2.2.4 Read user defaults

Save the current menu settings as user-defined menu settings.

Sav e us er d ef aul ts

Configuration Code Turn on（Default)

- 1 8 -

You can restore the menu settings for the user-defined menu settings.

R es tor e us er d ef aul ts

2.2.5 Interface Setting

T hi s d es k to p s c an ner s up por t U SB KB , U SB to s er i al por t , s er i al p or t i nter f ac e .

You c a n s et U S B PC KB , U SB M AC KB i nt e r fac e by s c an ni n g b el ow bar c od e .

U SB k ey bo ar d

U SB M AC KB ( N o t E na bl e d )

H os t m o de ( C om m an d d ec odi n g +

phy s i c al s er i al p or t )

Scan n in g t h is b ar co d e i s p r o h ib it ed in

You c a n s et s er i al p or t i nt er fac e by s c a nni n g b el ow bar c ode .

Ser i al por t ( Defaults)

You c a n s et U S B t o s er i al p or t i nter f ac e by s c an ni ng b el ow bar c o de . ( N e ed dr i v e,

pl eas e c on tac t t he s al es )

Configuration Code Turn on（Default)

- 1 9 -

U SB t o s er i al p or t

T hi s b ar c od e i s us e d w hen c o nn ec ti ng to th e h os t c om p uter an d up gr adi ng .

U SB t o n etw or k p or t

U SB u pgr a de

2.2.6 Serial port setting

2.2.6.1 Baud rate setting

Bau d R a te 4800

Bau d R a te 9600( def aul t )

Bau d R a te 38400

Configuration Code Turn on（Default)

- 2 0 -

Bau d R a te

19200

Bau d R a te 57600

Bau d R a te

115200

2.2.6.2 Serial data bit, stop bit, check bit configuration

7data bits, 1stop bits, no check bit

7data bits, 1stop bits,even check bit

7data bits, 1stop bits, odd check bit

7data bits, 2stop bits, no check bit

Configuration Code Turn on（Default)

- 2 1 -

7data bits, 2stop bits, even check bit

7data bits, 2stop bits, odd check bit

8data bits, 1stop bits, no check bit

（default）

8data bits, 1stop bits, even check bit

8data bits, 1stop bits, odd check bit

8data bits, 2stop bits, no check bit

8data bits, 2stop bits, even check bit

8data bits, 2stop bits, odd check bit

2.2.7 Scan Mode

Configuration Code Turn on（Default)

- 2 2 -

Manual scanning model

Auto-sensing mode

(default)

2.2.8 Lighting Control

Normal mode (default)

Lighting always on

2.2.9 Aiming light control

Lighting always off

Aiming light always off

Normal mode (default)

Configuration Code Turn on（Default)

- 2 3 -

Aiming light always on

2.2.10 Illumination

Turn on Illumination

Turn off Illumination(default

2.2.11 GS Control character substitution(Enable character escape first)

Not replaced

The output character "Ç" must Enable virtual keyboard first

（mode1）”or（mode2）或（mode3）

Replace with Ç（Not Enable

d）

Configuration Code Turn on（Default)

- 2 4 -

Replace with |

Replace with ^] （Not Enabled）

Replace with ]（Not Enabled）

Replace with <GS>（Not Enabled）

2.2.12 Start character setting

Cancel start character(default)

Add STX as start character

2.2.13 Ending character setting

Configuration Code Turn on（Default)

- 2 5 -

Cancel ending character

Add Enter

Add Tab

Add \t

Add Enter+Tab (def aul t )

Add ETX

2.2.14 Chinese output mode

In order to output correctly according to the specified encoding format, you need to

specify the output encoding format, such as Simplified Chinese in Notepad / excel output

configuration into GBK encoding, in Word and other output configured into UNICODE

encoding.

When the output encoding format is configured as English/Latin-1 encoding, the output

Configuration Code Turn on（Default)

- 2 6 -

mode of the USB keyboard is affected by the virtual keyboard function switch. When the

output encoding format is configured as GBK encoding / UNICODE encoding, the output

mode of the USB keyboard is forced to be the virtual keyboard output.

English/Latin-1 code(default)

GBK code

（ No te pa d /exc el ）

UNICODE cod e（ Word ）

2.2.15 Invoice (For China)

Disable invoice code(default)

Enable invoice code

Configuration Code Turn on（Default)

- 2 7 -

式

Note: In order to make sure the invoice output correctly, when you use invoice function please set

C hi nese out put to C hi nes e ou tpu t(Notepad/excel), at the same time, turned off the function

of changing the original content of the barcode, such as CodeID, custom pre/postfix, and start character.

2.2.16 Invoice type (for China)

Special invoice (default)

plain invoice

2.2.17 Inverse code option

（only 1D/DataMatrix/Aztec）

Only decode normal code (default)

Only decode inverse code

Decode both normal code and inverse code (default)

2.2.18 rtual keyboard

Mode 1： The characters between 0x20～0xFF output using the virtual keyboard mode that is not

supported under the current keyboard layout. The characters between 0x00~0x1F output according to

control characters define.

Configuration Code Turn on（Default)

- 2 8 -

Mode 2：The characters between 0x20～0xFF both using the virtual keyboard mode to output. The

characters between 0x00~0x1F output according to control characters define.

Mode 3：The characters between 0x00～0xFF both using the virtual keyboard mode to output.

D i s a b le v ir tu a l k e y b o a r d ( d e fa u lt )

E n a b le v ir tu a l k e y b o a r d ( mo d e 1 )

E n a b le v ir tu a l k e y b o a r d ( mo d e 2 )

E n a b le v ir tu a l k e y b o a r d ( mo d e 3)

2.3 Beeper, LED notifications and Vibration prompt setting barcode

2.3.1 Beeper Volume setting

Vol um e l ow

Configuration Code Turn on（Default)

- 2 9 -

Vol um e hi g h ( de fa ul t )

2.3.2 Start-up beep

Shu t d ow n s tar t - up be ep

O pe n s t ar t - u p b ee p ( d efa ul t )

2.3.3 Start-up vibration prompt

Ope n s t ar t- up v i br ati o n pr om pt ( de fa ul t)

Shu t d ow n s tar t- up v i br ati on pr om pt

2.3.4 Good read beep

g oo d r e ad be ep off

Configuration Code Turn on（Default)

- 3 0 -

g oo d r e ad be ep on ( def aul t)

2.3.5 Beep pitch-good read

Beep pitch-good read open (default)

Beep pitch-good read off (default)

2.3.6 Good read Prompt audio rate (tone)

tone low (default)

tone high

2.3.7 beep duration-good read

tone middle

Configuration Code Turn on（Default)

- 3 1 -

Tone long (default)

Tone short

2.3.8 Error sound

You w i l l he ar 4 c o nti n ue al ar m s ou nds w he n d at a u pl o ad fai l ur e, o ne s i ngl e al ar m

s ou nd m e ans s c a n an unr ec o gni z ed c on fi g u r ati on c o de .

er r or s o un d l ow pi tc h ( de fa ul t )

er r or s o un d m i ddl e pi tc h

er r or s o un d hi gh pi tc h

2.3.9 Good-read LED

Goo d- r ea d L ED o ff

Goo d- r ea d L ED o n ( d ef aul t )

Configuration Code Turn on（Default)

- 3 2 -

2.4 Timeout between decodes (Same barcodes)（Self-induction mode）

2.4.1Timeout between same decode

It is used to configure the interval for reading the same barcode. If the setup time is not

exceeded, the same barcode will be read one time only .

200ms

500ms(default)

750ms

1s

2.4.2 Reading time

Single reading time

In the inductive reading mode, this parameter refers to the maximum length of time that the reading

engine is allowed to continue to collect and recognize before the reading is successful. After a

successful reading or a single reading timeout, the reading engine will enter an interval that does not

capture the reading. The single reading time setting range is 0.1~25 seconds and the step size is 0.1

second. Indicates that the reading time is infinitely long. The default duration is 3.0 seconds.

Configuration Code Turn on（Default)

- 3 3 -

2.5 USB keyboard update speed setting

There barcode is used to set the update speed when scanner is in USB keyboard pattern. If the

performance of your PC is lower, we suggest you choose slow update speed to make sure the scanner

update the right data.

Slow update speed (default)

Middle update speed

Fast update speed (default)

Custom update speed (2ms~50ms)

2.6 OA & LF setting（USB keyboard）

Only 0A(LF) line feed

Configuration Code Turn on（Default)

- 3 4 -

Both 0A(LR) and 0D(CR) line feed

2.7 USB keyboard text-transform

Normal output (default)

Only 0D(CR)line feed (default)

all Caps

Case reversal

lower case

2.8 Keyboard layout setting

Configuration Code Turn on（Default)

- 3 5 -

English (United States)

French (France)

Italian (Italy)

d）

German (Germany)

Italian 142 (Italy)（Not Enable

Spanish (Latin America)（Not Enabled）

Spanish (Spain)

Finnish（Not Enabled）

Configuration Code Turn on（Default)

- 3 6 -

Japanese（Not Enabled）

Russian (typewriter)（Not Enabled）

Russian (MS)（Not Enabled）

Irish（Not Enabled）

Arabic (101)（Not Enabled）

Polish (214)（Not Enabled）

Polish (Programmers)（Not Enabled）

Configuration Code Turn on（Default)

- 3 7 -

Dutch (Netherlands)（Not Enabled）

Czech (QWERTZ)（Not Enabled）

Portuguese (Portugal)（Not Enabled）

Portuguese (Brazil)（Not Enabled）

Swedish (Sweden）（Not Enabled）

Turkish Q

Configuration Code Turn on（Default)

- 3 8 -

Greek (MS)（Not Enabled）

Turkish F（Not Enabled）

English (UK)

2.9 Symbologies

2.9.1 enable/disable all symbologies

French (Belgium)

Ena bl e al l bar c o de m i ght s l ow dow n s c a nn e r dec od e s p ee d. We s ug ges t

ena bl e th e bar c od e y o u ne ed ba s e d o n y ou r s c en e. En abl e al l bar c od e i s

def aul t .

Ena bl e al l s y m b ol ogi es ( d efa ul t )

Configuration Code Turn on（Default)

- 3 9 -

D i s abl e al l s y m b ol ogi es

2.9.2 Codabar

Enable Codabar

Disable Codabar

2.9.3 Codabar start/ending character setting

Don’t send Codabar start/ending character (default)

Send Codabar start/ending character

2.9.4 Codabar limitation of length

Codabar min length（1~127bit）

Codabar max length（1~127bit）

Configuration Code Turn on（Default)

- 4 0 -

2.9.5 Code 39

Enable Code 39

Disable Code 39

2.9.6 Code 39 check bit

Disable Code 39 check bit (default)

Enable Code 39 check send check bit

2.9.7 Code 39 Full ASCII

Enable Full ASCII

Enable Code 39 check don’t send check bit

Configuration Code Turn on（Default)

- 4 1 -

Disable Full ASCII (default)

2.9.8 Code 39 limitation of length

Code 39 min length (1~127bit)

Code 39 max length (1~127bit)

2.9.9 Code 32 (Code 39 needs to be enabled）

（Not Enabled）

Enable Code 32

Disable Code 32

2.9.10 Interleaved 2 of 5 （ITF5）

Enable ITF25

Disable ITF25

Configuration Code Turn on（Default)

- 4 2 -

2.9.11 Interleaved 2 of 5 （ITF5）check bit

Disable ITF25 check (default)

Enable ITF25 check don’t send check bit

Enable ITF25 check send check bit

2.9.12 Interleaved 2 of 5 （ITF5）length setting

ITF25 No Fixed Length (4-128bit)（default）

ITF25 6 bit length

ITF25 8 bit length

Configuration Code Turn on（Default)

- 4 3 -

ITF25 10 bit length

ITF25 12 bit length

ITF25 16 bit length

ITF25 14 bit length

ITF25 20 bit length

ITF25 18 bit length

ITF25 22 bit length

Configuration Code Turn on（Default)

- 4 4 -

ITF25 24 bit length

2.9.13 Interleaved 2 of 5 Limitation of length

Interleaved 2 of 5 min limitation length （4~128 bit）

Interleaved 2 of 5 max limitation length (4~128bit)

2.9.14 Industrial 2 of 5 (Industrial 25code)（4-24bit）

Enable Industrial 2 of 5

Disable Industrial 2 of 5

2.9.15 Industrial 2 of 5 Limitation of length

Industrial 2 of 5 min length (4~128bit)

Configuration Code Turn on（Default)

- 4 5 -

Industrial 2 of 5 max length (4~128bit)

2.9.16 Matrix 2 of 5 (matrix 25 code)（4-24 bit）

Enable Matrix 2 of 5

Disable Matrix 2 of 5

2.9.17 atrix 2 of 5 Limitation of length

Matrix 2 of 5 min length (4~128 bit)

Matrix 2 of 5max length (4~128bit)

2.9.18 Standard 25

Enable Standard 25 (default)

Disable Standard 25

2.9.19

Standard 25

Limitation of length

Configuration Code Turn on（Default)

- 4 6 -

Standard 25 min length（4~128 bit）

Standard 25max length（4~128 bit）

2.9.20 Standard 25 check bit

Standard 25 don’t check (default)

Standard 25check and output

2.9.21 Code 93

Enable Code 93

Standard 25 check, not output

Configuration Code Turn on（Default)

- 4 7 -

CDisable Code 93

2.9.22 Code 93 Limitation of length

Code 93 min length（1~127 bit）

Code 93 max length（1~127bit）

2.9.23 Code 11（

Not Enabled

）

Enable Code 11

Disable Code 11 (default)

2.9.24 Code 11 check bit output（

Not Enabled

）

Enable Code 11check bit output

Configuration Code Turn on（Default)

- 4 8 -

Disable Code 11check bit output

2.9.25 Code 11 check bit option（

Not Enabled

）

Disable Code 11check bit (default)

Code 11 one check bit

Code 11 two check bit

2.9.26 Code 11 Limitation of length（

Not Enabled

）

Code 11 min length（1~127 bit）

Code 11 max length（1~127bit）

2.9.27 Code 128

Configuration Code Turn on（Default)

- 4 9 -

Enable Code 128

Disable Code 128

2.9.28 Code 128 Limitation of length

Code 128 min length (1~127 bit)

Code 128 max length (1~127 bit)

2.9.29 GS1-128

Enable GS1-128

G

Disable GS1-128

2.9.30 ISBT-128

Disable ISBT 128

Configuration Code Turn on（Default)

- 5 0 -

Enable ISBT 128

2.9.31 Plessey

Enable Plessey (default)

Disable Plessey

2.9.32 Plessey Limitation of length

Plessey min length（1~127bit）

Plessey max length （1~127bit）

2.9.33

Plessey

check bit optional

Configuration Code Turn on（Default)

- 5 1 -

Plessey don’t check

Plessey check don’t send check bit (default)

2.9.34 MSI plessey

Enable MSI plessey (default)

Plessey check anf send check bit

Disable MSI plessey

2.9.35 MSI plessey Limitation of length

MSI plessey min length （1~127 bit）

Configuration Code Turn on（Default)

- 5 2 -

MSI plessey max length （1~127bit）

2.9.36 MSI plessey check bit output

MSI plessey check bit output

MSI plessey check bit don’t output (default)

2.9.37 MSI plessey Check mode selection setting

MSI plessey don’t check

MSI plessey one check bit MOD10 (default)

MSI plessey two check bit MOD10/MOD10

Configuration Code Turn on（Default)

- 5 3 -

MSI plessey two check bit MOD10/MOD11

2.9.38 UPC-A

Enable UPC-A

Disable UPC-A

2.9.39 UPC-A check bit

Send UPC-A check bit (default)

don’t send UPC-A check bit

2.9.40 PC-A to EAN-13

Enable UPC-A toEAN-13

Disable UPC-A to EAN-13 (default)

Configuration Code Turn on（Default)

- 5 4 -

2.9.41 UPC-E

Enable

UPC-E

Disable

UPC-E

2.9.42 UPC-E check bit

Send UPC-E check bit (default)

don’t send UPC-E check bit

2.9.43 UPC-E expand UPC-A

Enable UPC-E expand UPC-A

Disable UPC-E expand UPC-A (default)

2.9.44 EAN/JAN-8

Configuration Code Turn on（Default)

- 5 5 -

Enable EAN/JAN-8

Disable EAN/JAN-8

2.9.45 EAN/JAN-13

Enable

EAN/JAN-13

Disable

EAN/JAN-13

2.9.46 UPC/EAN/JAN extra-code

Ignore UPC/EAN/JAN extra-code (default)

Decode UPC/EAN/JAN extra-code

Adapt UPC/EAN/JAN extra-code

2.9.47 EAN13 to ISBN

Configuration Code Turn on（Default)

- 5 6 -

Enable EAN13 to ISBN

Disable EAN13 to ISBN (default)

2.9.48 EAN13 to ISSN

Enable EAN13 to ISSN

Disable

EAN13 to ISSN

(default)

2.9.49 GS1 DataBar（RSS14）(Stacked)

Enable GS1 DataBar

Disable

GS1 DataBar

2.9.50 GS1 DataBar（RSS14）(Stacked) AI（01

）character send

Configuration Code Turn on（Default)

- 5 7 -

Send AI（01）character (default)

Don’t send AI（01）character

2.9.51 GS1 DataBar Limited

Enable GS1 DataBar Limited

2.9.52 GS1 DataBar Limited AI（01）

character send

Send AI（01）character (default)

Disable GS1 DataBar Limited

Don’t send AI（01）character

2.9.53 GS1 DataBar Expanded

Enable GS1 DataBar Expanded

Disable GS1 DataBar Expanded

Configuration Code Turn on（Default)

- 5 8 -

2.9.54 PDF417

Enable PDF417

Disable

PDF41

2.9.55 Micro PDF417

Enable Micro PDF417

Disable

Micro PDF417

2.9.56 QR Code

Enable QR

Disable

QR

2.9.57 ro QR

Configuration Code Turn on（Default)

- 5 9 -

Enable Micro QR

Disable

Micro QR

2.9.58 Data Matrix

Enable Data Matrix

Disable

Data Matrix

2.10 User-defined prefix setting

output

Enable user-defined prefix output

Disable user-defined prefix output（default）

edit

clear all user-defined prefix

Configuration Code Turn on（Default)

- 6 0 -

user-defined prefix

(After scan this code you can set the prefix you want based on the data and barcode in table ID)

2.11 User-defined suffix setting

output

Enable user-defined suffix output

Disable user-defined suffix output（default）

edit

clear all user-defined suffix

User-defined suffix

ID）

（After scan this code you can set the prefix you want based on the data and barcode in table

2.12 Barcode prefix and suffix order selection

Prefix

Configuration Code Turn on（Default)

- 6 1 -

Start character + CODE ID + AIM ID + Custom prefix (default)

Start character +Custom prefix +CODE ID+AIM ID

Suffix

Custom suffix+CODE ID+AIM ID+ end character (default)

CODE ID+AIM ID+Custom suffix+end character

2.13 Code ID

output

Disable CODE ID (default)

Enable CODE ID before barcode

Configuration Code Turn on（Default)

- 6 2 -

Enable CODE ID after barcode

edit

Custom CODE ID

（After scan this code you can set the prefix you want based on the data and barcode in table ID）

clear all user-defined CODE ID

2.14 AIM ID setting

Disable AIM ID（default）

Enable AIM ID before barcode

Enable AIM ID after barcode

Configuration Code Turn on（Default)

- 6 3 -

- 64 -

APPENDIX

Appendix 1 data and editing code

0

1

2

3

4

5

6

- 65 -

7

8

9

A

B

C

D

- 66 -

E

F

Cancel all data read before

Cancel current setting

Save

cancel the data read last time

Appendix 2 Barcode Type Code ID Table

Code type

HEX

CODE ID (default)

All codes

99

- 67 -

Codabar

61

a

Code128

6A

j

ISBT-128

6A

j

Code32

3C

<

Code93

69

i

Code39

62

b

Code11

48

H

Plessey

70

p

MSI plessey

6D

m

EAN-13

64

d

EAN-8

64

d

GS1 DataBar（RSS14）(Stacked)

52

R

GS1 DataBar Limited

52

R

GS1 DataBar Expanded

52

R

GS1-128 (EAN-128)

6A

j

2 of 5

Interleaved 2 of 5

65

e

Matrix 2 of 5

76

v

Industry 2 of 5

44

D

Stamdard 25

73

s

UPC-A

63

c

UPC-E

63

c

ISBN

42

B

ISSN

6E

n

DataMatrix

75

u

- 68 -

PDF417

72

r

Micro PDF417

53

s

QR Code

51

Q

Micro QR Code

51

Q

- 69 -

Code type

AIM ID

Description

All codes

Codabar

]Fm

m：0~1

Code128

]C0

m：0，1，2，4

ISBT-128

]C4

Code32

]A0

Code93

]G0

Code39

]Am

m：0，1，3，4，5，7

Code11

]Hm

m：0，1，3，8，9

Plessey

]P0

MSI plessey

]Mm

m：0，1，7，8，9

EAN-13

]Em

m：0，1，3，4

EAN-8

]Em

m：0，1，3，4

GS1 DataBar(RSS14） (Stacked)

]e0

GS1 DataBar Limited

]em

GS1 DataBar Expanded

]em

GS1-128 (EAN-128)

]C1

2 of 5

Interleaved 2 of 5

]Im

m：0，1，3

Matrix 2 of 5

]X0

Industry 2 of 5

]S0

Stamdard 25

]Rm

m：0，8，9

UPC-A

]Em

m：0，3

UPC-E

]Em

m：0，3

ISBN

]X0

- 70 -

ISSN

]X0

DataMatrix

]dm

m: 0~6

PDF417

]Lm

m: 0~5

Micro PDF417

]Lm

m: 0~5

QR Code

]Qm

m: 0~6

Micro QR Code

]Qm

m: 0~6

- 71 -

Appendix 3 eyeball character ASCII table

10 hex

16 hex

Corresponding character

0

00

NUL

1

01

SOH

2

02

STX

3

03

ETX

4

04

EOT

5

05

ENQ

6

06

ACK

7

07

BEL

8

08

BS

9

09

HT

10

0A

LF

11

0B

VT

12

0C

FF

13

0D

CR

14

0E

SO

- 72 -

15

0F

SI

16

10

DLE

17

11

DC1

18

12

DC2

19

13

DC3

20

14

DC4

21

15

NAK

22

16

SYN

23

17

ETB

24

18

CAN

25

19

EM

26

1A

SUB

27

1B

ESC

28

1C

FS

29

1D

GS

30

1E

RS

- 73 -

31

1F

US

- 74 -

Appendix 4 eyeball character ASCII table

10 hex

16 hex

character

10 hex

16 hex

charac

ter

10 hex

16 hex

charact

er

32

20

<SPACE>

64

40

@

96

60

`

33

21

!

65

41

A

97

61

a

34

22

“

66

42

B

98

62

b

35

23

#

67

43

C

99

63

c

36

24

$

68

44

D

100

64

d

37

25

%

69

45

E

101

65

e

38

26

&

70

46

F

102

66

f

39

27

‘

71

47

G

103

67

g

40

28

(

72

48

H

104

68

h

41

29

)

73

49

I

105

69

i

42

2A

*

74

4A

J

106

6A

j

43

2B

+

75

4B

K

107

6B

k

44

2C

,

76

4C

L

108

6C

l

- 75 -

45

2D

-

77

4D

M

109

6D

m

46

2E

.

78

4E

N

110

6E

n

47

2F

/

79

4F

O

111

6F

o

48

30

0

80

50

P

112

70

p

49

31

1

81

51

Q

113

71

q

50

32

2

82

52

R

114

72

r

51

33

3

83

53

S

115

73

s

52

34

4

84

54

T

116

74

t

53

35

5

85

55

U

117

75

u

54

36

6

86

56

V

118

76

v

55

37

7

87

57

W

119

77

w

56

38

8

88

58

X

120

78

x

57

39

9

89

59

Y

121

79

y

58

3A

:

90

5A

Z

122

7A

z

59

3B

;

91

5B

[

123

7B

{

60

3C

<

92

5C

\

124

7C

|

- 76 -

61

3D

=

93

5D

]

125

7D

}

62

3E

>

94

5E

^

126

7E

~

63

3F

?

95

5F

_

- 77 -

Appendix 5 Default setting table

Parameter name

Default setting

Remark

Communication settings

TTL-232

(default)

Serial port baud rate

9600

Serial check bit

No check bit

Serial data bit

8 bit

Serial port stop

1 bit

Host mode

OFF

USB

USB Keyboard layout

American keyboard

Barcode content contains carriage

enter character feed processing

0D only (enter

character CR) Tab

Case conversion

Not converting

virtual keyboard

Off

USB keyboard sending speed

Fast speed

Control character escape output

combination control key

Off

Chinese character output mode

English/Latin-1 code

Invoice function off

Mode parameter

Default reading mode

Self-induction mode

Manual mode, sensing

mode

Self-induction mode

Recode detection interval

500ms

Trigger condition

sensing

- 78 -

Lighting and aiming

Lighting mode

Normal mode

Aiming mode

Normal mode

Prompt output

Power on tone

on

Decoding success

tone

prompt

on

Beep type

audio rate low

Beep volume

high

Beep duration

long

code read tone setting

Allow

Decoding success LED prompt

On

Data editing

Prefix and suffix

Prefix adding

No add

Prefix content

No

AIM ID

No add

Code ID

No add

Suffix adding

No add

Suffix content

No

- 79 -

End character adding

Add

End character content

0x0A，0×0D

Enter

Parameter name

Default setting

Remark

Barcode symbol parameter

Inverted barcode reading

Open

Valid for all bar

code symbol types

Code 128

Reading

Allow

Max length

127

Min length

1

GS1-128（ UCC/EAN-128）

Reading

Allow

Max length

127

Min length

1

EAN-8

Reading

Allow

- 80 -

EAN-13

Reading

Allow

2 bit extension code

No reading

5 bit extension code

No reading

must have the extension code

No require

ISSN

Reading

Not allow

ISBN

Reading

Not allow

UPC-E

Reading

allow

Output check character

Output

Expand to UPC-A

No expand

UPC-A

- 81 -

Reading

allow

Output check character

Output

UPC-A to EAN-13

Off

Interleaved 2

of

5

Reading

allow

Check

No check

Max length

128

Min length

4

Matrix 2 of 5

Read

Not allow

Max length

128

Min length

4

Industrial

2

of

5

Reading

allow

- 82 -

Max length

128

Min length

4

Standard

2

of

5

Reading

allow

Check

No check

Output check character

No output

Max length

128

Min length

4

Code 39

Reading

allow

Check

No check

Output check character

No output

Support Full ASCII

Support

Default (off)

Max length

127

- 83 -

Min length

1

Code 32

Reading

allow

Codabar

Reading

allow

Check

No check

Send start character and end character

No output

Max length

127

Min length

1

Code 93

Reading

allow

Max length

127

Min length

1

GS1 Databar（RSS14）(Stacked)

- 84 -

Reading

allow

send AI(01) character

Send

GS1

Databar Limited

Reading

allow

Send AI(01) character

Send

GS1

Databar Expanded

reading

allow

Code 11

reading

allow

Check bit

Output

Off

Check bit option

Off

Max length

127

Min length

1

Plessey

reading

Allow

- 85 -

Check bit

Check but don’t

output

Max length

127

Min length

1

MSI-Plessey

Reading

allow

Output check

Don’t output

Check bit mode selection

1 bit MOD10

Max length

127

Min length

1

PDF417

Reading

allow

Max length

2710

Min length

1

Micro PDF417

- 86 -

Reading

allow

Max length

2710

Min length

1

QR Code

Reading

allow

Max length

7089

Min length

1

Micro QR

Reading

allow

Max length

7089

Min length

1

Data Matrix

Reading

allow

Max length

3116

- 87 -

Min length

1

- 88 -

Appendix 6 operational character (USB keyboard)

decimal

hexadeci

mal

Corresponding key value (disable CODE ID)

Corresponding key value (enable

CODE ID)

0

00

retain

Ctrl+@

1

01

Insert

Ctrl+A

2

02

Home

Ctrl+B

3

03

End

Ctrl+C

4

04

Delete

Ctrl+D

5

05

PageUp

Ctrl+E

6

06

PageDown

Ctrl+F

7

07

ESC

Ctrl+G

8

08

Backspace

9

09

Tab

10

0A

Enter (The configuration of CRLF processing

decide how it express)

Ctrl+J

11

0B

Caps Lock

Ctrl+K

12

0C

Print Screen

Ctrl+L

13

0D

Enter (The configuration of CRLF processing

decide how it express)

Enter

- 89 -

14

0E

Scroll Lock

Ctrl+N

15

0F

Pause/Break

Ctrl+O

16

10

F11

Ctrl+P

17

11

Direction key ↑

Ctrl+Q

18

12

Direction key ↓

Ctrl+R

19

13

Direction key ←

Ctrl+S

20

14

Direction key →

Ctrl+T

21

15

F12

Ctrl+U

22

16

F1

Ctrl+V

23

17

F2

Ctrl+W

24

18

F3

Ctrl+X

25

19

F4

Ctrl+Y

26

1A

F5

Ctrl+Z

27

1B

F6

ESC

28

1C

F7

Ctrl+\

29

1D

F8

Ctrl+]

- 90 -

30

1E

F9

Ctrl+^

31

1F

F10

Ctrl+_

- 91 -

Appendix 7 operational character (serial port and USB-VCOM)

decimal

hexadecimal

character

0

00

NUL

1

01

SOH

2

02

STX

3

03

ETX

4

04

EOT

5

05

ENQ

6

06

ACK

7

07

BEL

8

08

BS

9

09

HT

10

0A

LF

11

0B

VT

12

0C

FF

13

0D

CR

14

0E

SO

- 92 -

15

0F

SI

16

10

DLE

17

11

DC1

18

12

DC2

19

13

DC3

20

14

DC4

21

15

NAK

22

16

SYN

23

17

ETB

24

18

CAN

25

19

EM

26

1A

SUB

27

1B

ESC

28

1C

FS

29

1D

GS

30

1E

RS

- 93 -

31

1F

US

configuration instruction and example

Example for user-defined prefix and suffix:

You can edit 10 characters as prefix or suffix. (In order to make sure the prefix and suffix can output

normally, please enable user-defined prefix or suffix first)

Example 1.1： Add XYZ to all type of barcode as prefix.

Look up appendix 2, you can find that the HEX value for all codes is “99”. Look up appendix 3, the HEX

value for XYZ is “58,59,5A”. First scan “user-defined prefix” in 2.11 edit, then the scanner will have two

sounds like “D…D…”, then scan 9，9，5，8，5，9，5，A，and save, the setting accomplished.

If you want to change the prefix or suffix you set before you save the setting, you can scan “cancel the

data read last time” or “Cancel all data read before” to reset. If you want to give up setting scan “Cancel

current setting”.

Example 1.2： Add R to QR code as prefix.

Look up appendix 2, you can find that the HEX value for QR code is “73”. Look up appendix 3, the HEX

value for Q is “51”. First scan “user-defined prefix”, then the scanner will have two sounds like “D…D…”,

then scan 5，1，5，2，and save, the setting accomplished.

- 94 -

Example 1.3： Cancel user-defined prefix in QR code

When you customize the suffix, the custom suffix for this type of barcode is cleared by adding no other

characters after the barcode type character.

Scan the configuration code Customize the prefix, then scan the appendix data and edit the 5,1 in the

barcode to save it.

Note: If there is a prefix added for all barcodes, the configured QR code prefix will be restored to the prefix

added for all barcodes.

If you need to clear the pre/post suffixes added for various bar code types, scan to clear all custom prefixes

and clear all custom suffix configuration codes.

Example for Barcode length limit configuration

When configuring the minimum barcode length limit, you must ensure that the configured minimum length

is not greater than the current maximum length configuration. Otherwise, an error will be displayed.

Similarly, when configuring the barcode maximum length limit, you must also ensure that the maximum

length of the configuration is not less than the current minimum length configuration.

Example 2.1: Configuring Code 128 barcode length is 4-12 bit.

Scan the configuration code Code 128 minimum length limit, then scan the appendix data and edit the 4

in the barcode, save,

Scan the configuration code Code 128 maximum length limit, then scan the appendix data and edit the 1,

2, and save the barcode to complete the configuration.

Example 2.2: Configure Interleaved 2 of 5 barcode length is 14 bit

Configure Interleaved 2 of 5 barcode length 14 bits to directly scan the quick configuration barcode ITF25

14-bit length configuration, or configure the barcode minimum and minimum length:

Scan the configuration code Interleaved 2 of 5 minimum length limit, then scan the appendix data and

edit the bar code 1, 4, save,

Scan the configuration code Interleaved 2 of 5 maximum length limit, then scan the appendix data and

edit the 1, 4, and save the barcode to complete the configuration.

Example 2.3: Configuring Code 39 barcode length to any length supported

Scan the configuration code Code 39 minimum length limit, then scan the appendix data and edit the 0

- 95 -

in the barcode, save,

Scan the configuration code Code 39 maximum length limit, then scan the appendix data and edit the 0

in the barcode, save, that is, complete the configuration.

Example for USB keyboard send speed configuration

If the performance of the client PC is weak and the transmission error is easy to occur, you need to

customize the USB keyboard transmission speed to a slower speed, such as 50ms:

Scan the configuration code Customize the sending speed, then scan the appendix data and edit the

5,0 in the barcode to save the configuration.

Set method of a single reading time modification

Example: Set the length of a single reading to 5.0s. Please read the following barcodes in order:

1. Read “Modify the length of a single reading”.

2. Read the data code "5" and "0".

3. Read “Save”.

- 96 -

Mærke:	Adesso
Kategori:	Stregkodelæser
Model:	NuScan 2600U

Adesso NuScan 2600U Manual

Produkt Specifikationer

Har du brug for hjælp?

Stregkodelæser Adesso Manualer

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer