Adj 3D Vision Encoder Manual

Adj Ikke kategoriseret 3D Vision Encoder

Læs gratis den danske manual til Adj 3D Vision Encoder (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Adj 3D Vision Encoder, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

User Instructions

10/16

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

3D Vision EncoDEr

SET MODE

ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 3

3D Vision Encoder General Instructions

3D Vision Encoder Precautions

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Do not remove the unit cover under any conditions. There are no

user serviceable parts inside.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-Cord Protection - Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

fixture.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer.

• The fixture should be serviced by qualified service personnel

when:

A. The power cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a

marked change in performance.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the

basic operations of this unit. These instructions contain impor-

tant safety information regarding the use and maintenance of this

unit. Please keep this manual with the unit, for future reference.

3D Vision Encoder Introduction

Introduction: Congratulations and thank you for purchasing the

ADJ 3D Vision Encoder. The 3D Vision Encoder is an essential

piece used to set the DMX address of the 3D Visions.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any

question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.adj.

com for any comments or suggestions. For service related issue

please contact ADJ Products, LLC. Service Hours are Monday

through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.

Voice: (800) 322-6337

Fax: (323) 725-6100

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire,

do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do

not attempt any repairs yourself, doing so will void your manu-

factures warranty. In the unlikely event your unit may require ser-

vice please contact .ADJ Products, LLC

PLEASE recycle the shipping carton whenever possible.

ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 2

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	3D Vision Encoder

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj 3D Vision Encoder stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj Pixie Driver 8000 V2 Manual

8 Juli 2025

Adj WMS1 Manual

8 Juli 2025

Adj PAR Z300 6K Manual

7 Juli 2025

Adj PAR Z300 3K Manual

7 Juli 2025

Adj Vintage Bar Manual

31 Maj 2025

Adj Vintage X Manual

30 Maj 2025

Adj VS1 FLEX 45 Manual

30 Maj 2025

Adj PC415X Manual

30 Maj 2025

Adj VS1 Manual

30 Maj 2025

Adj 40 HEX Panel IP Manual

30 Maj 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo CPE14-PRSGO-2 Manual

30 Juli 2025

CSL 302372 Manual

30 Juli 2025

Dimplex CAS1000R Manual

30 Juli 2025

Thermaltake TOUGHFAN EX 120 ARGB Manual

30 Juli 2025

Eibenstock PLE 450 Manual

30 Juli 2025

Saris Bones 4 Manual

30 Juli 2025

Holzmann RSM500 Manual

30 Juli 2025

Impact PFSK-2436 Manual

30 Juli 2025

Deye SUN-M30G4-EU-Q0-I Manual

30 Juli 2025

Digitus DN-95103-3 Manual

30 Juli 2025