Adj 64P LED Pro Manual

Adj Ikke kategoriseret 64P LED Pro

Læs gratis den danske manual til Adj 64P LED Pro (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Adj 64P LED Pro, eller vil du spørge andre brugere om produktet?

Side 1/7
User Instructions
American DJ®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
64P LED PRO Introduction
© ®American DJ Supply - www.americandj.com - 64P LED PRO Instruction Manual Page 2
Rev. 7/07
Unpacking: Thank you for purchasing the 64P LED PRO by Ameri-
been shipped in perfect operating condition. Carefully check the ship-
carton appears to be damaged, carefully inspect your xture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
instructions. Do not return this unit to your dealer without rst contact-
ing customer support.
Introduction: The 64P LED PRO is part of American DJ’s continuing
pursuit for creating high quality affordable intelligent fixtures. The 64P
LED PRO is a DMX intelligent LED Par Can. This Par Can is light weight
and compact which makes it a great piece for mobile DJ’s and clubs.
This unit can be used as a stand alone, or in a Master/Slave congura-
tion. The unit can also be controlled via DMX controller.
Customer Support: American DJ provides a toll free customer sup-®
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ .®
PLEASE recycle the shipping carton when ever possible.
64P LED PRO Safety Precautions
© ®American DJ Supply - www.americandj.com - 64P LED PRO Instruction Manual Page 4© ®American DJ Supply - www.americandj.com - 64P LED PRO Instruction Manual Page 3
To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
Do not spill water or other liquids into or on to your unit.
Be sure that the local power outlet match that of the required volt-
age for your unit.
Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user
serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 12 for cleaning details.
Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
64P LED PRO Warranty Registration
The 64P LED PRO carries a limited warranty. 3 year (1095 days)
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
of your proof of purchase invoice. Please contact American DJ® cus-
tomer support for a R.A. number.
64P LED PRO Features
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
64P LED PRO General Instructions
Multi-Colors
• Color Strobe
Electronic Dimming 0-100%
Built in Microphone
DMX-512 protocol
Uses three, six, or seven DMX Channels
User Selectable Voltage
Caution! Never attempt to change the voltage while the fixture is
change the voltage.
1. Be sure to check the wall voltage, rst before changing the volt-
age on the unit.
2. Unscrew the phillips screw located on the top middle of the par
can.
3. After removing the screw, seperate the back half of the par can
from the front.
4. Select the voltage that matches the wall voltage.
5. Reassemble in reverse order.
64P LED PRO Voltage Selection


Produkt Specifikationer

Mærke: Adj
Kategori: Ikke kategoriseret
Model: 64P LED Pro
Lampe type: LED
Indbygget skærm: Ja
Produkttype: Disco spotlight
Oprindelsesland: USA
Velegnet til indendørsbrug: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj 64P LED Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig