Adj Atmospheric RG LED Manual

Adj Ikke kategoriseret Atmospheric RG LED

Læs gratis den danske manual til Adj Atmospheric RG LED (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Adj Atmospheric RG LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

Unpacking: Thank you for purchasing the Atmospheric RG LED

by American DJ . Every Atmospheric RG LED has been thoroughly ®

tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your

xture for any damage and be sure all equipment necessary to oper-

ate the unit has arrived intact. In the event damage has been found

or parts are missing, please contact our toll free customer support

number for further instructions. Please do not return this unit to your

dealer without contacting customer support rst.

Introduction: T -he Atmospheric RG LED is an incredible 2 chan

nel DMX intelligent, red & green laser, and dark blue LED fixture. The

unique “web type” laser combined with the LED creates a psychedelic

atmospheric effect. The Atmospheric RG LED can operate as a stand

alone fixture or in a Master/Slave configuration. The Atmospheric RG

LED has three operating modes; sound active mode, show mode, or it

can be controlled via DMX. For best results use fog or special effects

smoke to enhance the beams projections.

Customer Support: American DJ provides a toll free customer sup®-

port line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.americandj.com for any com-

ments or suggestions. For service related issue please contact Ameri-

can DJ®. Service Hours are Monday through Friday 8:00 a.m. to 4:30

p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

Atmospheric RG LED General Introduction

Rev. 3/14

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Atmospheric RG LED General Instructions Atmospheric RG LED Safety Precautions

Safety Issues: This unit may “pop” the fuse if the maximum allotted

load of 2 amps is reached.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 18 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

• 30mW Green Laser, 80mW Red Laser, & 1 x 3W Dark Blue LED

• 2 DMX Channels

• 3 Operating Modes - Sound Active, Show Mode, & DMX Control

• Laser “Web Type” Effect

• Digital Display for Address and Function Setting

• UC3 Controller (Not Included)

• Run as Stand Alone unit or in a Master-Slave Conguration

• Power Cord Daisy Chain up to 24 units max. See page 16

Atmospheric RG LED Features

Atmospheric RG LED Warranty Registration

The A tmospheric RG LED carries a 2 year (730 days) limited warranty

for LEDs and a 90 Day limited warranty for the laser. Please fill out

the enclosed warranty card to validate your purchase and warranty.

You may also register your product online at www. americandj.com.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

If the unit is under warranty you must provide a copy of your proof of

purchase invoice. Please contact American DJ® customer support

for a R.A. number.

LASER RADIATION AVOID

DIRECT EYE EXPOSUR E

Maximum output <5 mW

Wavelength: 405, 532n m

Class IIIa laser produc t

This device complies with 21 CF chapter R I,

Subchapter J, or CFR 1040.10 an 1040.1 d 1

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Atmospheric RG LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Atmospheric RG LED stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj FS600LED Manual

15 August 2025

Adj Event Bar Q4 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025

Adj FREQ Matrix Manual

14 August 2025

Adj Royal 3D II Manual

14 August 2025

Adj Vizi Spot 5R Manual

14 August 2025

Adj Inno Scan LED Manual

14 August 2025

Adj Vizi BSW 300 Manual

14 August 2025

Adj MOD QW100 Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Anker SOLIX RS40P Manual

16 August 2025

Middle Atlantic C3-FANKIT Manual

16 August 2025

Yamaha KX61 Manual

16 August 2025

Anker SOLIX RS40 Manual

16 August 2025

Biltema 82-3824 Manual

16 August 2025

VAIS Technology Soundlinq 3 Manual

16 August 2025

PreSonus UC Surface Manual

16 August 2025

ART X-11 Manual

16 August 2025

Biltema 18-597 Manual

16 August 2025

Evenflo Aero² Manual

16 August 2025