Adj Electra LED Manual

Adj Ikke kategoriseret Electra LED

Læs gratis den danske manual til Adj Electra LED (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Adj Electra LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

User Instructions

American DJ ®

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

Introduction:

Thank you for purchasing the American DJ Electra LED™. To optimize

the performance of this product, please read these operating instruc-

tions carefully to familiarize yourself with the basic operations of this

unit. The Electra LED™ is a multi-colored rotating moon ower effect.

The unit operates in sound-active mode only.

Customer Support:

American DJ provides a toll free customer support line, to provide set ®

up help and to answer any question should you encounter problems

during your set up or initial operation. You may also visit us on the web

at www.americandj.com for any comments or suggestions.

Service Hours are Monday through Friday 9:00 a.m. to 6:00 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

Do not discard the shipping carton in the trash. Please recycle when

ever possible.

Electra LED™ Introduction

American DJ®

5/07

Electra LED™ Operation

Electra LED™ Warranty Registration

The Electra LED™ carries a three year (1095 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included

in the shipping container. If the unit is under warranty, you must pro-

vide a copy of your proof of purchase invoice. You may obtain a R.A.

number by contacting customer support at (800) 322-6337.

Electra LED™ Features

• Includes Built-In Hanging Yoke

• Sound-Active

• Light Weight

• LED Output Similar to 250W Lamp

• Voltage is User Selectable

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Electra LED™ General Instructions

Electra LED™ Fuse Replacement

Introduction: The American DJ Electra ®

LED™

is a dual output LED

moon-ower effect. This fixture is designed for mobile DJ’s, clubs,

bands, roller rinks and any arena that requires a compact, light weight,

easy to use unit.

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ ®

Electra LED™ before attempting operation.

General Operation: This fixture is designed to operate as a stand

alone sound active unit, there is no need of a controller. It has been

tested and there is no assembly necessary. The Electra LED™ is

ready to be plugged in out of the box, there is no power switch.

When this fixture is plugged in, the units LED panel will start to proj-

ect preset designs, all to the sound of an audio source via an internal

microphone. The audio sensitivity is preset at the factory for opti-

mum performance and is not user adjustable. After plugging the unit

if there is no LED output check the breaker. If the breaker has not

popped, please contact customer support for further instructions.

This fixture features a light weight case design and an adjustable

hanging bracket.

Fuse Replacement: First unplug the power. The fuse holder is

located at the rear of the unit next to the power cord. Using a flat-

head screw driver unscrew the fuse holder. Remove the bad fuse and

replace with a new one.

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Electra LED
Lampe type:	LED
Produkttype:	Disco spotlight
Kan monteres på væggen:	Ja
Pære levetid:	100000 t
Oprindelsesland:	USA
Velegnet til indendørsbrug:	Ja