Adj Galaxian 3D MKII Manual

Adj Ikke kategoriseret Galaxian 3D MKII

Læs gratis den danske manual til Adj Galaxian 3D MKII (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Adj Galaxian 3D MKII, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

ADJ Products, LLC - www.adj.com - Galaxian 3D MKII Instruction Manual Page 2

Unpacking: Thank you for purchasing the Galaxian 3D MKII by ADJ

Products, LLC. Every Galaxian 3D MKII has been thoroughly tested

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your x-

ture for any damage and be sure all equipment necessary to operate

the unit has arrived intact. In the event damage has been found or parts

are missing, please contact our toll free customer support number for

further instructions. Please do not return this unit to your dealer with-

out contacting customer support rst.

Introduction: The Galaxian 3D MKII is an incredible five channel

DMX intelligent, green and red laser fixture. The red and green laser

beams rotate back and forth creating amazing aerial effect on a ceiling

or wall. The Galaxian 3D MKII can operate as a stand alone fixture, or

in a Master/Slave configuration. Galaxian 3D MKII can be a sound The

active fixture or it can also be controlled via DMX This fixture is suit. -

able for theaters, studios, retail stores, and other similar locations. For

best results use fog or special effects smoke to enhance the beams

projections.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments

or suggestions. For service related issue please contact ADJ Products,

LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ customer support.

PLEASE recycle the shipping carton whenever possible.

Galaxian 3D MKII General Introduction

3/13

GALAXIAN 3D MKII

ADJ Products, LLC - www.adj.com - Galaxian 3D MKII Instruction Manual Page 4ADJ Products, LLC - www.adj.com - Galaxian 3D MKII Instruction Manual Page 3

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Galaxian 3D MKII General Instructions Galaxian 3D MKII Safety Precautions

Safety Issues: This unit may “pop” the fuse if the maximum allotted

load of 7 amps is reached.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 18 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

• 30mW Green Laser & 80mW Red Laser

• 5 Channel DMX Control

• 2 Operating Modes - Sound Active & DMX Control

• Fan Cooled

• Digital Display for Address and Function Setting

• UC3 Controller (Not Included)

• Power Cord Daisy Chain up to 14 units max. See page 16

Galaxian 3D MKII Features

Galaxian 3D MKII Warranty Registration

The G Please alaxian 3D MKII carries a 90 day limited warranty. fill out

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-

paid and accompany a return authorization (R.A.) number. If the unit

is under warranty you must provide a copy of your proof of purchase

invoice. Please contact ADJ customer support for a R.A. number.

! !

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Galaxian 3D MKII Installation

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Galaxian 3D MKII

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Galaxian 3D MKII stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj Pixie Driver 8000 V2 Manual

8 Juli 2025

Adj WMS1 Manual

8 Juli 2025

Adj PAR Z300 6K Manual

7 Juli 2025

Adj PAR Z300 3K Manual

7 Juli 2025

Adj Vintage Bar Manual

31 Maj 2025

Adj Vintage X Manual

30 Maj 2025

Adj VS1 FLEX 45 Manual

30 Maj 2025

Adj PC415X Manual

30 Maj 2025

Adj VS1 Manual

30 Maj 2025

Adj 40 HEX Panel IP Manual

30 Maj 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo CPE14-PRSGO-2 Manual

30 Juli 2025

CSL 302372 Manual

30 Juli 2025

Dimplex CAS1000R Manual

30 Juli 2025

Thermaltake TOUGHFAN EX 120 ARGB Manual

30 Juli 2025

Eibenstock PLE 450 Manual

30 Juli 2025

Saris Bones 4 Manual

30 Juli 2025

Holzmann RSM500 Manual

30 Juli 2025

Impact PFSK-2436 Manual

30 Juli 2025

Deye SUN-M30G4-EU-Q0-I Manual

30 Juli 2025

Digitus DN-95103-3 Manual

30 Juli 2025