Adj LED Pixel Tube 360 Sys Manual

Adj Ikke kategoriseret LED Pixel Tube 360 Sys

Læs gratis den danske manual til Adj LED Pixel Tube 360 Sys (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Adj LED Pixel Tube 360 Sys, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

User Instructions

LED Pixel 10C Introduction

ADJ Products, LLC - www.adj.com - LED Pixel 10C User Manual Page 2

Unpacking: Thank you for purchasing the LED Pixel 10C by ADJ

Products, LLC. Every LED Pixel 10C has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Do not return this unit to your dealer without rst con-

tacting customer support.

Introduction: The ADJ LED Pixel 4C 10-Channel Driver/Controller for

the LED Pixel Tube 360 (not included). This xture can be used in a

stand alone mode or connected in a Master/Slave conguration. This

controller has ve operating modes: Sound Active mode, Auto mode,

RGB Dimmer mode, Static Color mode and DMX control mode.

Customer Support: ADJ Products, LLC provides a customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

1/13

LED Pixel 10C Safety Precautions

ADJ Products, LLC - www.adj.com - LED Pixel 10C User Manual Page 4ADJ Products, LLC - www.adj.com - LED Pixel 10C User Manual Page 3

• Mulit-Colors

• Five Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 4 DMX Modes: 5 Channel Mode, 7 Channel Mode, 32 Channel

Mode, and 480 Channel Mode.

• ADJ LED RC compatiable (Not Included)

• Power Cord Daisy Chain (See page 23)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 23 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing ampliers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

LED Pixel 10C Warranty Registration

LED Pixel 10C Features

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

LED Pixel 10C General Instructions

The 1 LED Pixel 10C carries a year limited warranty. The reason this

product carries a 1 year limited warranty is because it is a controller.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

The R.A. number must be clearly written on the outside of the return

package. A brief description of the problem as well as the R.A. number

must also be written down on a piece of paper included in the ship-

ping carton. If the unit is under warranty, you must provide a copy of

your proof of purchase invoice. You may obtain a R.A. number by con-

tacting our customer support team on our customer support number.

All packages returned to the service department not displaying a R.A.

number on the outside of the package will be returned to the shipper.

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	LED Pixel Tube 360 Sys

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj LED Pixel Tube 360 Sys stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj ElectraPix Bar 8 Manual

12 September 2025

Adj Vizi Beam RX2 Manual

12 September 2025

Adj Par Z150 RGBA Manual

12 September 2025

Adj Wolfmix W1 MK2 Manual

29 August 2025

Adj Fog Storm 1700HD Manual

19 August 2025

Adj Nucleus Pro Manual

19 August 2025

Adj Vizi CMY 16RX Manual

19 August 2025

Adj Micro Galaxian Manual

19 August 2025

Adj WiFLY Bar RGBA Manual

19 August 2025

Adj Mega Bar UV100 Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan VBP15SL Manual

17 September 2025

Rocktrail IAN 463536 Manual

17 September 2025

Kimo KNT 320 Manual

17 September 2025

Vestil LPRO-36-16-4 Manual

17 September 2025

Vestil CPC-20 Manual

17 September 2025

Vestil UNI-4048-4-BLU-230-1 Manual

17 September 2025

Vestil CANT-3648 Manual

17 September 2025

InLine 16277S Manual

17 September 2025

Vestil H-75-LD Manual

17 September 2025

Fulgor Milano P1B 5343 QU Manual

17 September 2025