Adj Mega Beam Bar Manual

Adj Ikke kategoriseret Mega Beam Bar

Læs gratis den danske manual til Adj Mega Beam Bar (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Adj Mega Beam Bar, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

Mega Beam Bar Introduction

ADJ Products, LLC - www.adj.com - Mega Beam Bar User Manual Page 2

5/13

Unpacking: Thank you for purchasing the Mega Beam Bar by ADJ

Products, LLC. Every Mega Beam Bar has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Do not return this unit to your dealer without rst con-

tacting customer support.

Introduction: The ADJ Mega Beam Bar is part of a continuing pursuit

to create high quality intelligent lighting. The Mega Beam Bar is an

linear fixture that produces 16 sharp, 13.5 degree beams of light. This

lighting system features six RGB color mixing LED fixtures. This xture

can be used in a stand alone mode or connected in a Master/Slave

conguration. This system has six operating modes: Sound Active

mode, Auto Run mode, Built-In Program mode, Static Color Mode,

RGB dimmer mode, and DMX control mode. This fixture is suitable for

theaters, studios, retail stores, and other similar locations.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

MEGA BEAM BAR

Mega Beam Bar Safety Precautions

ADJ Products, LLC - www.adj.com - Mega Beam Bar User Manual Page 4ADJ Products, LLC - www.adj.com - Mega Beam Bar User Manual Page 3

• Mulit-Colors

• 3 Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 4 DMX Modes: 2 Channel Mode, 4 Channel Mode, 8 Channel

Mode, & 10 Channel Mode

• UC3 Compatiable (Not Included)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 17 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Mega Beam Bar Warranty Registration

Mega Beam Bar Features

The Mega Beam Bar carries a 3 year limited warranty. Please fill out

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided),

afxing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Mega Beam Bar Installation

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Mega Beam Bar

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Mega Beam Bar stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj Micro Galaxian Manual

19 August 2025

Adj WiFLY Bar RGBA Manual

19 August 2025

Adj Mega Bar UV100 Manual

19 August 2025

Adj Dotz Flood Manual

19 August 2025

Adj POW-R BAR65 Manual

19 August 2025

Adj UNI LTS Manual

19 August 2025

Adj FS600LED Manual

15 August 2025

Adj Event Bar Q4 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tefal Premiss PP1042 Manual

19 August 2025

Emos DCTW24 Manual

19 August 2025

Tefal Masterchef Gourmet Baking QB51K1 Manual

19 August 2025

Tefal EasyGrill Adjust BG90F5 Manual

19 August 2025

Tefal Instant Comfort Compact SE2330 Manual

19 August 2025

Tefal Inox & Design BG2150 Manual

19 August 2025

Ikea TISKEN 604.985.39 Manual

19 August 2025

Philips VTR8080 Manual

19 August 2025

Moulinex La Moulinette DPA1G Manual

19 August 2025

Tefal Pro Minute GV8600 Manual

19 August 2025