Adj Mega Flat Pak 8 Manual

Adj Ikke kategoriseret Mega Flat Pak 8

Læs gratis den danske manual til Adj Mega Flat Pak 8 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Adj Mega Flat Pak 8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

Mega Flat Pak 8 Introduction

ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 User Manual Page 2

5/13

Unpacking: Thank you for purchasing the Mega Flat Pak 8 by ADJ

Products, LLC. Every Mega Flat Pak 8 has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Do not return this unit to your dealer without rst con-

tacting customer support.

Introduction: The ADJ Mega Flat Pak 8 includes 8 of the poplular ADJ

Mega Par Profile LED wash fixtures, 7 DMX connector cables, and a

soft carrying case to protect your Mega Par Profiles during transport

and dust-free while storing. The Mega Par Profile is a DMX intelligent,

high powered LED par fixture. This xture can be used in a stand alone

mode or connected in a Master/Slave conguration. This wash has five

operating modes: Sound Active mode, Auto mode, RGB mode, Static

Color mode, and DMX control mode.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

MEGA FLAT PAK 8

Mega Flat Pak 8 Safety Precautions

ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 User Manual Page 4ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 User Manual Page 3

• System Includes: 8 x Mega Par Profiles, 7 x DMX Cables, and

1 x ADJ Carry Bag

• Mulit-Colors

• Five Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• Seven DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel

Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, and

7 Channel Mode.

• ADJ LED RC compatiable (Not Included)

• Power Cord Daisy Chain (See page 17)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 17 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Mega Flat Pak 8 Warranty Registration

Mega Flat Pak 8 Features

The 3 Mega Flat Pak 8 carries a year limited warranty. Please fill out

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Mega Flat Pak 8 Installation

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Mega Flat Pak 8

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Mega Flat Pak 8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj Event Bar Q4 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025

Adj FREQ Matrix Manual

14 August 2025

Adj Royal 3D II Manual

14 August 2025

Adj Vizi Spot 5R Manual

14 August 2025

Adj Inno Scan LED Manual

14 August 2025

Adj Vizi BSW 300 Manual

14 August 2025

Adj MOD QW100 Manual

14 August 2025

Adj UV Canon Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hisense HRCF200 Manual

14 August 2025

American Audio DJ Spot LED Manual

14 August 2025

American Audio CDG-350 Manual

14 August 2025

Tefal Inicio FV1243 Manual

14 August 2025

Beverage-Air PH1-1HS-PT Manual

14 August 2025

Nutrichef PKTEWC24 Manual

14 August 2025

Voltcraft VC-CAR200 Manual

14 August 2025

Optimate 7 Select Manual

14 August 2025

Sauermann SI-1801 Manual

14 August 2025

Atlona AT-VGW-HW-T Manual

14 August 2025