Adj Mega Flat Pak Plus Manual

Adj Ikke kategoriseret Mega Flat Pak Plus

Læs gratis den danske manual til Adj Mega Flat Pak Plus (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Adj Mega Flat Pak Plus, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

User Instructions

1/15

MEGA FLAT PAK PLUS

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

Mega Flat Pak Plus Safety Precautions

ADJ Products, LLC - www.adj.com - Mega Flat Pak Plus User Manual Page 4

Power Supply: The ADJ Mega Par Prole Plus contains a automatic

voltage switch, which will auto sense the voltage when it is plugged

into the power source. With this switch there is no need to worry about

the correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Mega Par Prole Plus can be controlled via DMX-512 protocol. The

Mega Par Prole Plus has 5 DMX modes, please see pages 9-10 for

the dierent modes. The DMX address is set on the back panel of the

Mega Par Prole Plus. Your unit and your DMX

controller require a standard 3-pin XLR connec-

tor for data input and data output (Figure 1). We

recommend Accu-Cable DMX cables. If you are

making your own cables, be sure to use standard

110-120 Ohm shielded cable (This cable may be

purchased at almost all pro lighting stores). Your

cables should be made with a male and female

XLR connector on either end of the cable. Also

remember that DMX cable must be daisy chained

and cannot be split.

ADJ Products, LLC - www.adj.com - Mega Flat Pak Plus User Manual Page 5

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 26 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Figure 1

Mega Flat Pak Plus Set Up

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Mega Flat Pak Plus

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Mega Flat Pak Plus stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj ElectraPix Bar 8 Manual

12 September 2025

Adj Vizi Beam RX2 Manual

12 September 2025

Adj Par Z150 RGBA Manual

12 September 2025

Adj Wolfmix W1 MK2 Manual

29 August 2025

Adj Fog Storm 1700HD Manual

19 August 2025

Adj Nucleus Pro Manual

19 August 2025

Adj Vizi CMY 16RX Manual

19 August 2025

Adj Micro Galaxian Manual

19 August 2025

Adj WiFLY Bar RGBA Manual

19 August 2025

Adj Mega Bar UV100 Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan VBP15SL Manual

17 September 2025

Rocktrail IAN 463536 Manual

17 September 2025

Kimo KNT 320 Manual

17 September 2025

Vestil LPRO-36-16-4 Manual

17 September 2025

Vestil CPC-20 Manual

17 September 2025

Vestil UNI-4048-4-BLU-230-1 Manual

17 September 2025

Vestil CANT-3648 Manual

17 September 2025

InLine 16277S Manual

17 September 2025

Vestil H-75-LD Manual

17 September 2025

Fulgor Milano P1B 5343 QU Manual

17 September 2025