Adj Micro 3D Manual

Adj Ikke kategoriseret Micro 3D

Læs gratis den danske manual til Adj Micro 3D (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Adj Micro 3D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

User Instructions

Unpacking: Thank you for purchasing the Micro 3D by American DJ®.

Every Micro 3D has been thoroughly tested and has been shipped in

perfect operating condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears

to be damaged, carefully inspect your xture for any damage and be

sure all equipment necessary to operate the unit has arrived intact. In

the event damage has been found or parts are missing, please contact

our toll free customer support number for further instructions. Please

do not return this unit to your dealer without contacting customer sup-

port rst.

Introduction: The Micro 3D is an simple, small, bright, green and

red laser fixture. The Micro 3D produces more than 200 beams with

star patterns that may be projected on a wall, ceiling, or dance floor.

The Micro 3D is a stand alone fixture with 2 operating modes; sound

active and auto. The Micro 3D’s compact, light weight case design

make it ideal for mobile entertainers, bands, night clubs and bar. For

best results use fog or special effects smoke to enhance the beams

projections.

Customer Support: American DJ provides a toll free customer sup®-

port line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.americandj.com for any com-

ments or suggestions. For service related issue please contact Ameri-

can DJ®. Service Hours are Monday through Friday 8:00 a.m. to 4:30

p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

Micro 3D General Introduction

9/11

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Micro 3D General Instructions Micro 3D Safety Precautions

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 10 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

• 30mW Green Laser

• 80mW Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• RF Wireless Remote Control (Included)

• Dual Hanging Bracket

Micro 3D Features

Micro 3D Warranty Registration

The Please Micro 3D carries a imited warranty. 90 day l fill out the

enclosed warranty card to validate your purchase. All returned service

items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. If the unit is under

warranty you must provide a copy of your proof of purchase invoice.

Please contact American DJ ®customer support for a R.A. number.

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	Micro 3D

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Micro 3D stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj FS600LED Manual

15 August 2025

Adj Event Bar Q4 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025

Adj FREQ Matrix Manual

14 August 2025

Adj Royal 3D II Manual

14 August 2025

Adj Vizi Spot 5R Manual

14 August 2025

Adj Inno Scan LED Manual

14 August 2025

Adj Vizi BSW 300 Manual

14 August 2025

Adj MOD QW100 Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech ARK-3520L-U8A1E Manual

15 August 2025

Advantech USB-5830-AE Manual

15 August 2025

Advantech WISE-2410-NB Manual

15 August 2025

MSW -EDGE AUTOMATIC Manual

15 August 2025

Evenflo Arena Manual

15 August 2025

Advantech WISE-4210-NA Manual

15 August 2025

Steinberg SBS-UH-210 Manual

15 August 2025

Advantech WISE-2410X-E21NA Manual

15 August 2025

Advantech WISE-750-02A1E Manual

15 August 2025

StarTech.com SAT3540U2E Manual

15 August 2025