Adj Micro 3D II Manual

Adj Effektmaskine Micro 3D II

Læs gratis den danske manual til Adj Micro 3D II (8 sider) i kategorien Effektmaskine. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Adj Micro 3D II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

User Instructions

1/16

MICRO 3D II

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 3ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 2

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Micro 3D II General Instructions

Micro 3D II Features

Micro 3D II Warranty Registration

The Micro 3D II carries a 1 Year (365 Days) limited warranty. Please

fill out the enclosed warranty card to validate your purchase. All

returned service items whether under warranty or not, must be freight

pre-paid and accompany a return authorization (R.A.) umber. If the n

unit is under warranty you must provide a copy of your proof of pur-

chase invoice. Please contact A customer support for a R.A. numDJ -

ber.

Unpacking: Thank you for purchasing the Micro 3D II by ADJ Prod-

ucts, LLC. Every Micro 3D II has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all equipment necessary to operate the unit has

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions.

Introduction: The Micro 3D II is an simple, small, bright, green and

red laser fixture. The Micro 3D II produces more than 200 beams with

star patterns that may be projected on a wall, ceiling, or dance floor.

The Micro 3D II is a fixture with 2 operating modes; sound stand alone

active and auto. The Micro 3D II’s compact, light weight case design

make it ideal for mobile entertainers, bands, night clubs and bar. For

best results use fog or special effects smoke to enhance the beams

projections.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments

or suggestions. Service For service related issue please contact ADJ®.

Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Stan-

dard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ customer support.

PLEASE recycle the shipping carton whenever possible.

Micro 3D II General Introduction

• 30mW Green Laser

• 80mW Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• UC Laser IR Wireless Remote Control & Airstream IR (Compatible)

• Dual Hanging Bracket

Produkt Specifikationer

Mærke:	Adj
Kategori:	Effektmaskine
Model:	Micro 3D II
Bredde:	172 mm
Dybde:	130 mm
Højde:	130 mm
Vægt:	907.2 g
Produktfarve:	Sort
Kontroltype:	Knapper
Produkttype:	Disco laserprojektor
Strømforbrug (typisk):	9 W
Antal:	1
Fjernbetjening inkluderet:	Ja
Strømkilde:	Vekselstrøm
Lysfarve:	Green, Red
Fjernbetjeningstype:	IR
Belysningstilstande:	Auto, Sound activated
Fjernbetjening funktion:	Ja
Bold diameter:	- "