Adj Pinspot LED Manual

Adj Lys Pinspot LED

Læs gratis den danske manual til Adj Pinspot LED (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Adj Pinspot LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Pinspot LED II SPECIFICATIONS:

LED: 3W LED

Working Position: Any safe working position

Power Input Voltage: 100~240V AC 50/60Hz

Weight: 1lbs./ 0.5Kgs.

Dimensions: 5.25”(L) x 4”(W) x 2.5”(H)

184 x 99 x 61mm

Warranty: 2 Year (730 days)

Unpacking: Thank you for purchasing the Pinspot LED II by ADJ Products, LLC. Every Pinspot LED II

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-

aged, carefully inspect your xture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts are missing, please contact our

toll free customer support number for further instructions. Do not return this unit to your dealer without

rst contacting customer support.

Introduction: The Pinspot LED II is part of ADJ’s continuing pursuit for creating high quality affordable

fixtures. The Pinspot LED II is a simple, small LED Pin Spot. This pin spot is light weight and compact

which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The Pinspot LED II

is also suitable for theaters, studios, retail stores, and other similar locations.

Lens Change: The Pinspot LED II comes with a standard 3 degree lens already attached. Included in

the box is an optional 12 degree lens. To switch lenses simply remove the retainer ring in front of the

current lens, carefully remove the lens, and attach the 12 degree lens. Replace the retainer ring and

the switch is complete.

Installation: The unit should be mounted using a mounting clamp (not provided), axing it to the

mounting bracket that is provided with the unit. Always ensure that the unit is rmly xed to avoid

vibration and slipping while operating. Always ensure that the structure to which you are attaching the

unit is secure and is able to support a weight of 10 times the unit’s weight. Also, always use a safety

cable that can hold 12 times the weight of the unit when installing the xture. The equipment must be

installed by a professional, and it must be installed in a place where it is out of the reach of people’s

grasp.

PINSPOT LED II

Caution!

No user serviceable parts inside do not attempt repairs. In the event your Pinspot

LED II should fail, contact ADJ.

Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide set up help

and to answer any question should you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday

through Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj.com

The Please Pinspot LED II carries a 2 year (730 day) limited warranty. fill out the enclosed warranty

card to validate your purchase. All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) umber. If the is under warranty n remote

you must provide a copy of your proof of purchase invoice. Please contact A customer support for DJ

a R.A. number.

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a pre-

scribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States

of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is

sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC Service

Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (includ-

ing parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the

entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If any accessories are shipped with the product,

ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, af-

fects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was

issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check up. During the period specified above, ADJ Products, LLC will

replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or

workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the

sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products

theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by ap-

plicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration

to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after

said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall

ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and

conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

 •LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines,

Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding LED and lamps)

 •LaserProducts=90-DayLimitedWarranty

 •L.E.D.Products=2-year(730days)LimitedWarranty(excluding motors, PCB boards, and power supplies, which have a 1-year (365 day Limited Warranty) and bat-

teries which have a 180 day limited warranty).

Produkt Specifikationer

Mærke:	Adj
Kategori:	Lys
Model:	Pinspot LED
Lampe type:	LED
Produkttype:	Disco spotlight
Pære levetid:	50000 t
Oprindelsesland:	USA
Velegnet til indendørsbrug:	Ja