Adj Snap Shot LED II Manual

Adj Effektmaskine Snap Shot LED II

Læs gratis den danske manual til Adj Snap Shot LED II (2 sider) i kategorien Effektmaskine. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Adj Snap Shot LED II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Snap Shot LED II SPECIFICATIONS:

LED: 220 LEDs

Working Position: Any safe working position

Power: 120V/60Hz

Power Draw: 15W

Weight: 4lbs./ 2Kgs.

Dimensions: 12.25”(L) x 10”(W) x 9”(H)

310 x 250 x 230mm

Warranty: 2 Year (730 days)

Unpacking: Thank you for purchasing the Snap Shot LED II by ADJ Products, LLC. Every Snap Shot

LED II has been thoroughly tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during shipping. If the carton appears

to be damaged, carefully inspect your xture for any damage and be sure all accessories necessary

to operate the unit has arrived intact. In the case damage has been found or parts are missing, please

contact our toll free customer support number for further instructions. Do not return this unit to your

dealer without rst contacting customer support.

Introduction: The Snap Shot LED II is part of ADJ’s continuing pursuit for creating high quality afford-

able fixtures. The Snap Shot LED II is a simple, small LED strobe. This strobe is light weight and

compact which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The flash

speed can be adjusted using the knob on the rear of the unit. There are also IN/OUT mono plugs

located at the rear. These plugs are used to connect to other Snap Shot LED II’s.

Snap Shot LED II

Caution!

No user serviceable parts inside do not attempt repairs. In the event your Snap Shot

LED II should fail, contact ADJ Products, LLC.

Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide set up help

and to answer any question should you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday

through Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj.com

The Please Snap Shot LED II II strobe light carries a 2 year (730 days) limited warranty. fill out the

enclosed warranty card to validate your purchase. All returned service items whether under warranty

or not, must be freight pre-paid and accompany a return authorization (R.A.) umber. If the n remote is

under warranty you must provide a copy of your proof of purchase invoice. Please contact ADJ cus-

tomer support for a R.A. number.

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.adj.com / E-mail: info@americandj.com

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

service@adjgroup.eu / www.adj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a

prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States

of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptableevidence, at the time service is

sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC Service

Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including

parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the

entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If any accessories are shipped with the product,

ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection,

affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization

was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check up. During the period specified above, ADJ Products, LLC will

replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or

workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the

sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon it’s products without any obligation to include these changes in any products

theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by

applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration

to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after

said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall

ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and

conditions heretofore published. This warranty was revised after December 1, 2012.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

 •LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines,

Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding LED, Laser Products and lamps)

 •LaserProducts=90-DayLimitedWarranty

 •L.E.D.Products=2-year(730days)LimitedWarranty(excluding motors, PCB boards, and power supplies, which have a 1-year (365 day Limited Warranty) and bat-

teries which have a 180 day limited warranty).

Produkt Specifikationer

Mærke:	Adj
Kategori:	Effektmaskine
Model:	Snap Shot LED II
Bredde:	250 mm
Dybde:	310 mm
Højde:	230 mm
Vægt:	2000 g
Produktfarve:	Sort
Kontroltype:	Dreje
Lampe type:	LED
Produkttype:	Disco spotlight
Strømforbrug (typisk):	15 W
Antal:	1
Strømkilde:	Vekselstrøm
Kan monteres på væggen:	Ja
Antal lamper:	220 Lampe( r)
Lysfarve:	Hvid
Indgangsspænding:	120 V
Pære levetid:	50000 t
Indgangsfrekvens:	60 Hz
Justerbar hastighed:	Ja
Velegnet til indendørsbrug:	Ja
Bold diameter:	- "