AEA TDI Manual

AEA Ikke kategoriseret TDI

Læs gratis den danske manual til AEA TDI (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 65 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 33 anmeldelser. Har du et spørgsmål om AEA TDI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AEA TDI

AEA TDIAEA TDI

OWNER’S MANUAL

AEA Philosophy in a DI

Thank you for choosing the AEA TDI phantom-powered

direct box. Your Active TDI is an indispensable tool for

both live and studio use, and we hope this box helps

you in capturing many wonderful sonic experiences.

TDI Overview

As with all DI boxes, the role of the phantom-powered

TDI is to facilitate impedance matching and a drop in

level. The TDI works by using an ultra-low-noise JFET

to buffer the high impedance of your instrument-level

signal. The JFET then drives a super-clean step-down

transformer which balances the signal. There is a THRU

jack paralleled to the input jack. The TDI allows for out-

standing sonic performance while minimizing distortion,

noise interference, and signal degradation from long

cable runs. The TDI can handle extremely high input

levels without clipping. Its durable steel chassis can

withstand the toughest live or studio environments. The

Phantom-Powered TDI pairs great with passive instru-

ments (guitars, basses, piezo pickups, etc.), but, with its

20 dB pad, can awlessly handle speaker level signals or

active instruments such as synths as well. As with all AEA

electronics, this circuit was designed by Fred Forssell.

Application

The straight-forward design of the TDI makes set-up

and usage simple. Power for the TDI is supplied with

standard 48V to the XLR output.

Simply plug the 1/4” cable from your instrument into

the INPUT jack of the TDI, and connect the OUTPUT via

XLR to the next device in your signal chain (preamp,

PA, audio interface, etc.), then engage phantom power.

Optionally, you can also use the THRU-put to send your

instrument signal to other instrument-level sources (such

as an ampliers). The through-put feature is also useful

for simultaneous wet/dry signal tracking.

Produkt Specifikationer

Mærke:	AEA
Kategori:	Ikke kategoriseret
Model:	TDI

Har du brug for hjælp?

Hvis du har brug for hjælp til AEA TDI stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AEA Manualer

1 Januar 2025

1 Januar 2025

3 September 2024

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025