AEG BBS1100 Manual

AEG Sander BBS1100

Læs gratis den danske manual til AEG BBS1100 (38 sider) i kategorien Sander. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om AEG BBS1100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/38

FIN

RUS

BBS 1100

BBSE 1100

Instructions for use

Please read and save these

instructions.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Instruction d’utilisation

Prière de lire et de conserver.

Istruzioni d’uso

Si prega di leggere le istruzioni e

di conservarle.

Instrucciones de uso

Lea y conserve estas

instrucciones por favor.

Instruções de serviço

Por favor leia e conserve em seu

poder.

Gebruiksaanwijzing

Lees en let goed op deze

adviezen.

Brugsanvisning

Vær venlight at læse og

opbevare.

Bruksanvisning

Var god läs och tag tillvara dessa

instruktioner.

Käyttöohje

Lue ja säilytö

Kullanøm kølavuzu

Lütfen okuyun ve saklayin

Èíñòðóêöèÿ ïî

èñïîëüçîâàíèþ

Ïîæàëóéñòà, ïðî÷òèòå è

ñîõðàíèòå íàñòîÿùóþ

èíñòðóêöèþ

ENGLISH BBS 1100, BBSE 1100

You have high standards and expect to purchase quality goods – quality offered by

AEG.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool was the right choice!

BBS 1100 BBSE 1100

Nominal power 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt speed no load 400 m/min 230–400 m/min. . . . . . . . . . . . . . . . . . .

Sanding width 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt length 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sanding surface 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . .

Weight 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

JPlease pay attention to the safety instructions in the attached leaflet!

JDust that arises when working in wood or using the tool on industrial material can be

dangerous to health. In this case connect the tool to a suction device.

JAppliances used at many different locations including open air must be connected

via a current surge preventing switch.

JAlways wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

JSawdust and splinters must not be removed while the machine is running.

JDo not pierce the motor housing as this could damage the double insulation (use

adhesives).

JAlways disconnect the plug from the socket before carrying out any work on the

machine.

Only plug-in when machine is switched off.

JKeep mains lead clear from working range of the machine. Always lead the cable

away behind you.

JWhen sanding metal the dust suction facility should not be used, because of the risk

of fire from flying sparks.

Typically the A-weighted noise levels of the tool are:

Sound pressure level = 88 dB (A)

Sound power level = 101 dB (A).

Wear ear protectors! Measured values determined according to EN 50 144.

Typically the hand-arm vibration is below 2.5 m/s2.

Measured values determined according to EN 50 144.

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

The belt sander can be used for sanding wood, plastics and metal.

Do not use this product in another way as stated for normal use.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Mains

connection

Use

Produkt Specifikationer

Mærke:	AEG
Kategori:	Sander
Model:	BBS1100

Har du brug for hjælp?

Hvis du har brug for hjælp til AEG BBS1100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sander AEG Manualer

4 Juli 2024

4 Juli 2024

4 Juli 2024

4 Juli 2024

4 Juli 2024

28 Juni 2024

28 Juni 2024

28 Juni 2024

Sander Manualer

Nyeste Sander Manualer

Kraftronic KT-XS 420 Manual

29 Marts 2025

Kraftronic KT-SS 250 Manual

29 Marts 2025

Makita BO5010 Manual

28 Marts 2025

Makita BO4554 Manual

28 Marts 2025

Bosch GSS 140 A Manual

15 Januar 2025

Hazet 9032M-53 Manual

1 Januar 2025

Alpha Tools DS 150 Manual

28 December 2024

Alpha Tools BBS 240 Manual

28 December 2024

Alpha Tools NTS 150/200 Manual

28 December 2024

RIKON 50-300 Manual

27 December 2024