AEG HBSE 100 Manual

AEG Båndslibere HBSE 100

Læs gratis den danske manual til AEG HBSE 100 (32 sider) i kategorien Båndslibere. Denne vejledning er vurderet som hjælpsom af 84 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 42.5 anmeldelser. Har du et spørgsmål om AEG HBSE 100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

FIN

HBS 100

HBSE 100

Instructions for use

Please read and save these

instructions.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Instruction d’utilisation

Prière de lire et de conserver.

Istruzioni d’uso

Si prega di leggere le istruzioni e

di conservarle.

Instrucciones de uso

Lea y conserve estas

instrucciones por favor.

Instruções de serviço

Por favor leia e conserve em seu

poder.

Gebruiksaanwijzing

Lees en let goed op deze

adviezen.

Brugsanvisning

Vær venlight at læse og

opbevare.

Bruksanvisning

Var god läs och tag tillvara dessa

instruktioner.

Käyttöohje

Lue ja säilytö

ENGLISH HBS 100, HBSE 100

You have high standards and expect to purchase quality goods – quality offered by

Atlas Copco.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool from Atlas Copco was the

right choice!

HBS 100 HBSE 100

Nominal power 1010 W 1010 W. . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt speed no load 350 m/min 230–350 m/min. . . . . . . . . . . . . . . . . . .

Sanding width 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt length 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sanding surface 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . .

Weight 4,2 kg 4,2 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Please pay attention to the safety instructions in the attached leaflet!

Dust that arises when working in wood or using the tool on industrial material can be

dangerous to health. In this case connect the tool to a suction device (e.g. Atlas

Copco absorbtion system AS 3 W).

Appliances used at many different locations including open air must be connected

via a current surge preventing switch.

Always wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

Sawdust and splinters must not be removed while the machine is running.

Do not pierce the motor housing as this could damage the double insulation (use

adhesives).

Always disconnect the plug from the socket before carrying out any work on the

machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine. Always lead the cable

away behind you.

When sanding metal the dust suction facility should not be used, because of the risk

of fire from flying sparks.

Typically the A-weighted noise levels of the tool are:

Sound pressure level = 91 dB (A).

Sound power level = 104 dB (A).

Wear ear protectors!

Typically the hand-arm vibration is below 2.5 m/s

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

The belt sander can be used for sanding wood, plastics and metal.

Do not use this product in another way as stated for normal use.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Mains

connection

Use

Produkt Specifikationer

Mærke:	AEG
Kategori:	Båndslibere
Model:	HBSE 100

Har du brug for hjælp?

Hvis du har brug for hjælp til AEG HBSE 100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Båndslibere AEG Manualer

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

Båndslibere Manualer

Nyeste Båndslibere Manualer

Proxxon BS/A Manual

5 Oktober 2022

Bort BBS-1010N Manual

5 Oktober 2022

Einhell BBS 720 Manual

5 Oktober 2022

Metabo BA E 1075 Manual

5 Oktober 2022

Einhell RT-BS 75 Manual

5 Oktober 2022

Makita 9921 Manual

5 Oktober 2022

Black And Decker KA85E Manual

5 Oktober 2022

Black And Decker KA85 Manual

5 Oktober 2022

Makita M9400 Manual

5 Oktober 2022

RYOBI EBS-7576 Manual

5 Oktober 2022