AEG STEP 420 Manual

AEG Sav STEP 420

Læs gratis den danske manual til AEG STEP 420 (62 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om AEG STEP 420, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/62

FIN

ST 400

ST 440

STEP 420

STEP 450

SPE 70

SPE 80 A

Instructions for use

Please read and save these

instructions.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Instruction d’utilisation

Prière de lire et de conserver.

Istruzioni d’uso

Si prega di leggere le istruzioni e

di conservarle.

Instrucciones de uso

Lea y conserve estas

instrucciones por favor.

Instruções de serviço

Por favor leia e conserve em seu

poder.

Gebruiksaanwijzing

Lees en let goed op deze

adviezen.

Brugsanvisning

Vær venlight at læse og

opbevare.

Bruksanvisning

Var god läs och tag tillvara dessa

instruktioner.

Käyttöohje

Lue ja säilytö

III

ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A

You have high standards and expect to purchase quality goods – quality offered by

Atlas Copco. We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool from Atlas Copco was the

right choice!

ST 400 ST 440 STEP 420

Cutting depth max. in:

Soft– wood 60 mm 60 mm 65 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hard wood 50 mm 50 mm 55 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steel 3 mm 3 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Nominal power 400 W 440 W 420 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 1,6 kg 1,6 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stroke rate under no-load 3000 min

-1 3000 min-1 450-3000 min-1

. . . . . . . . . .

Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bevel cuts up to 45o45o45o

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STEP 450 SPE 70 SPE 80 A

Cutting depth max. in:

Soft– wood 65 mm 70 mm 70 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hard wood 55 mm 60 mm 60 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steel 5 mm 5 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Nominal power 450 W 500 W 500 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 1,7 kg 1,7 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stroke rate under no-load 450-3000 min

-1 450-3000 min-1 450-3000 min-1

. .

Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bevel cuts up to 45o45o45o

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

J Please pay attention to the safety instructions in the attached leaflet!

J Dust that arises when working on material containing asbestos or stonework

containing crystalline silicic acid is harmful to the health. Please follow accident

prevention regulations.

J Appliances used at many different locations including open air must be connected

via a current surge preventing switch.

J Always use the protective shields on the machine.

J Always disconnect the plug from the socket before carrying out any work on the

machine.

J Always wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

J Sawdust and splinters must not be removed while the machine is running.

J Do not pierce the motor housing as this could damage the double insulation (use

adhesives).

J Keep mains lead clear from working range of the machine. Always lead the cable

away behind you.

J Only plug-in when machine is switched off.

J Dust that arises when working on wood or using the tool on industrial material can be

dangerous to health. In this case connect the tool to a suitable suction device.

J Do not use cracked or distorted saw blades.

Typically the A-weighted sound pressure level of the tool is 82 dB (A).The noise

level when working can exceed 85 dB (A). Wear ear protectors!

Measured values determined according to EN 50 144.

Typically the weighted acceleration is 3 m/s

Measured values determined according to EN 50 144.

This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves,

and internal cut-outs.

Do not use this product in another way as stated for normal use.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Use

Produkt Specifikationer

Mærke:	AEG
Kategori:	Sav
Model:	STEP 420

Har du brug for hjælp?

Hvis du har brug for hjælp til AEG STEP 420 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav AEG Manualer

2 Januar 2024

18 Oktober 2023

28 Juli 2023

16 December 2022

26 November 2022

16 November 2022

Sav Manualer

Nyeste Sav Manualer

MSW -CBS-250 Manual

17 Juni 2025

Smart365 SM-04-02060 Manual

17 Juni 2025

Dremel CS12V Manual

13 Juni 2025

Metabo BAS 505 Precision WNB Manual

9 Juni 2025

Mega 64000 Manual

9 Juni 2025

Metabo ST 18 LT 130 Manual

8 Juni 2025

Metabo STB 18 LT 130 Manual

8 Juni 2025

Metabo BAS 505 Precision DNB Manual

7 Juni 2025

Draper 70833 Manual

7 Juni 2025

Draper 83677 Manual

6 Juni 2025