EN 2
© Copyright LOTRONIC 2022
USER MANUAL
FEATURES
• 7 x 10W RGBW LED
• LED strip generating a kaleidoscope effect
• Strobe effect
• LED display
• 12/17 DMX channels
• Auto, DMX, master-slave, music or remote controlled operation
• Powercon in-/outputs
• Overheat protection
• Dual bracket for oor or truss mounting
• IR remote control
• Signal lead, power lead and safety rope are included
EXPLANATION OF SYMBOLS
The triangle containing a lightning symbol is used to indicate whenever your health is at risk
(due to electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
The unit complies with UK standards
For indoor use only
Protection class I. Requires an earth connection
0.5m
Minimum distance between the appliance and other objects
Don’t stare into the light beam
DO NOT OPEN THE HOUSING
SHOCK HAZARD
SAFETY RECOMMENDATIONS
• Please read these instructions carefully, they include important information about the installa-
tion, usage and maintenance of this product.
• Please keep this User Guide for future reference.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you
are connecting to is not higher than that stated on the bottom of the xture.
• The appliance is part of class I and must exclusively connected to an earthed mains outlet.
• This product is intended for indoor use only!
• To prevent risk of re or shock, do not expose xture to rain or moisture. Make sure there are no
ammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from
adjacent surfaces. Be sure that no ventilation slots are blocked.
• The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is
0.5m.
• The max. ambient temperature (Ta) is 40°C. Don’t operate the xture at higher temperatures.
• The surface temperature of the unit may reach up to 85°C. DO NOT TOUCH the housing bare-
hand during its operation. Turn off the power and allow about 20 minutes for the unit to cool
