AJH Synth MiniMod VCA Manual

AJH Synth Ikke kategoriseret MiniMod VCA

Læs gratis den danske manual til AJH Synth MiniMod VCA (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om AJH Synth MiniMod VCA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

VCA User Guide

Thank you for purchasing the AJH Synth MiniMod VCA module, which like all AJH Synth Modules,

has been designed and handbuilt in the UK from the very highest quality components. We hope

that it will help and inspire you towards creating some great music and soundscapes!

The MiniMod Discrete Cascaded VCA exactly re-creates the VCA circuitry of the vintage Model D

synthesiser in Eurorack modular format. It features two fully discrete transistor VCA cores which

are hardwired in series, to which we have added full voltage control to both VCA cores along with

an overdrive facility. Particular attention has been paid to the selection and matching of compo-

nents in the audio signal path, including the use of audiophile grade capacitors and operational

ampliers.

There are two Audio Inputs, each with their own level controls along with two CV inputs which

control the gain of VCA 1 and a Master CV Input and level control which controls the gain of VCA

2. An oset control allows a preset gain to be added to VCA 1. Internally it operates at the same

voltage and signal levels as the early Model D voltage controlled amplier and the output of VCA

1 is hardwired to the input of VCA 2.

A high gain (overdrive) mode can be selected with an onboard jumper. This overdrives the Input

of VCA 1 by a factor of 3 and forces it into soft clipping - the second VCA can be used in a similar

way to the Master volume on a guitar amplier to control levels so that variable levels of distor-

tion (or "grit") can be added to the sound and still maintain unity gain overall.

Module width is 10 HP of Eurorack space and it is compatible with standard Eurorack cases. The

height of the panel is 128.5mm and depth is 26mm . There are four mounting holes at the corners

of the module and we provide 4 of M3 rack xing screws, along with a Eurorack compatible

power cable. Current consumption is 40mA from the +12V supply rail and 22mA from the -12V

supply rail.

All AJHSynth modules are covered by a one year guarantee against manufacturing defects.

Note:

It is very important that the power supply ribbon cable is connected correctly, see the “adjustment and

calibration” section for an illustration of the correct orientation.

Discrete Transistor Cascaded VCA

www.ajhsynth.com

mod

DISCRETE CASCADED VCA

MASTER

CV 2

OUT

CV 2CV 1

AUDIO 1

AUDIO 2

AUDIO 2AUDIO 1

MASTER

OFFSET

mod

CV 1

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

11 Master (VCA 2) Level

1 Audio Input 1

5 CV Input 1

6 CV Input 2

VCA 1 Oset 9

Audio Level 1 3

Audio Level 2 4

Audio Input 2 2

Audio Output 12

Master CV Input 10

1 Audio Input 1 : Audio Input 1 forms part of a 2 input audio mixer which is attached to the front end of

VCA 1, this input is mixed with Input 2 at a level set by Audio 1 Level Control (3). Signal

levels of up to +/- 5 Volts are acceptable.

Note:

Just like the VCA on the vintage Model D synthesiser on which this module is based, the

input stage is AC coupled - therefore it is not possible to process DC control voltages

through the Audio Inputs - it is suitable for processing audio signals only. However, if DC

control voltages are accidentally connected to the Audio Inputs it will not cause any

damage to the module.

2 Audio Input 2 : Audio Input 2 forms part of a 2 Input audio mixer which is attached to the front end of

VCA 1. This input is mixed with Input 1 at a level set by Audio 2 Level Control (4). Signal

levels of up to +/- 5 Volts are acceptable. Should more Audio inputs be needed a

Eurorack compatible audio mixer can be connected to either Audio Input 1 or 2.

3 Audio Level 1 : Sets the amount of signal from Audio Input 1 (between 0% and 100%) that is mixed with

Audio Input 2 and sent to the Input of VCA 1.

4 Audio Level 2 : Sets the amount of signal from Audio Input 2 (between 0% and 100%) that is mixed with

Audio Input 1 and sent to the input of VCA 1.

5 CV Input 1 : Control voltage Input for VCA 1, this is mixed with CV Input 2 (6) and the sum of these

voltages control the gain of VCA 1. An input voltage range of +/-5 V is acceptable and +5V

gives approximately unity gain. Negative voltages will generally be ignored unless

combined with a (larger level) positive voltage from CV Level 2 control, in which case the

resulting voltage will be (CV2 - CV1). The output of both VCA 1 and VCA 2 repond in a

linear manner in relation to all CV inputs.

Controls, Inputs and Outputs

7 CV Level 1

8 CV Level 2

Produkt Specifikationer

Mærke:	AJH Synth
Kategori:	Ikke kategoriseret
Model:	MiniMod VCA

Har du brug for hjælp?

Hvis du har brug for hjælp til AJH Synth MiniMod VCA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AJH Synth Manualer

AJH Synth MiniMod VCA Manual

19 August 2024

AJH Synth MiniMod VCF Manual

16 August 2024

AJH Synth MiniMod VCO Manual

16 August 2024

AJH Synth Dual Contour Manual

15 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MRP Ribbon Manual

3 Juli 2025

Cougar STC 600 Manual

3 Juli 2025

Schneider GVAPR54 Manual

3 Juli 2025

Rowenta X-PERT 7.60 RH6A21 Manual

3 Juli 2025

Turtle Beach Atom Manual

3 Juli 2025

Schneider GV2MCK04 Manual

3 Juli 2025

Rowenta Sprinto Silence SO2040 Manual

3 Juli 2025

Chauvin Arnoux C177A Manual

3 Juli 2025

Aiper Pilot V2 Manual

3 Juli 2025

Rowenta X-Pert 7.60 RH6A31 Manual

3 Juli 2025