Alpine RVC-C310 Manual
Læs nedenfor 📖 manual på dansk for Alpine RVC-C310 (39 sider) i kategorien dashcam. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/39
Advanced Dash Cam
DVR-C310R
DVR-C310S
RVC-C310
•OWNER’S MANUAL
Please read before using this equipment.
•MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
•BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
•MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
•ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il attrezzatura.
•РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед началом
использования оборудования.
FOR CAR USE ONLY/ POUR APPLICATION AUTOMOBILE UNIQUEMENT/ NUR FÜR
AUTOMOBIL GEBRAUCH/ PARA USO EN AUTOMÓVILES/ SOLO PER L’UTILIZZO IN
AUTOMOBILE/ ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ
4
Operating Instructions
Points to Observe for Safe Usage
Read this manual carefully before using the system components. They contain instructions on how to
use this product in a safe and effective manner. Alpine cannot be responsible for problems resulting from
failure to observe the instructions in this manual.
This manual uses various pictorial displays to show you how to use this product safely and to alert you to
potential dangers resulting from improper connections and operation. Following are the meanings of these
pictorial displays. It is important to fully understand the meanings of these pictorial displays in order to use
this manual and the system properly.
Safety symbols in this guide
"Warning" - This symbol means Important Instructions. Failure to heed them can result in serious injury or
death.
"Caution" - This symbol means Important Instructions. Failure to heed them can result in Injury or material
property damage.
"Note" - This symbol means useful information that helps users better utilize the product's features.
Safety information for proper use
Driving and product operation
• MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
• OPERATION OF THE SYSTEM WHILE DRIVING IS DANGEROUS. Users should stop vehicle before operating
the software.
• THIS SOFTWARE IS DESIGNED FOR USE EXCLUSIVELY IN THE UNIT. It cannot and may not be used in
conjunction with other hardware.
5
Power supply and product installation
• DO NOT WATCH VIDEO WHILE DRIVING. Watching the video may distract the driver from looking ahead of the
vehicle and cause an accident.
• DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
• USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to
do so may result in fire, etc.
• USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric
shock.
• DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire.
• USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in
fire, electric shock or other injury.
• MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire, battery drain or
product damage.
• BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may
result in electric shock or injury due to electrical shorts.
• DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in
compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on
places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
• DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
• DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation,
take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to
take such precautions may result in fire.
• DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts
or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be
used for installations or ground connections. Using such parts could disable control of the vehicle and cause
fire etc.
• DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious
accident.
• DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an
accident.
Children
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE REACH OF CHILDREN. Swallowing them may result in
serious injury. If swallowed, consult a physician immediately.
6
Other information about the product
Product management and operation
• HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
• HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires
special technical skill and experience. To ensure safety, always contact the dealer where you purchased
this product to have the work done.
• USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified
accessory parts. Use of other than designated parts may damage this unit internally or may not securely
install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
• ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables
and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to
prevent the wire's insulation from being cut by the metal edge of the hole.
• DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with
high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product
failure.
• Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth
with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
• Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your
unit on.
• If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the
nearest Alpine Service Station for servicing.
7
Warning and Notices
• This device should never be mounted in or to a vehicle in a way that interferes with the operations of
the vehicle, including, but not limited to, airbags, lane detection systems, navigation device, and so forth.
Doing so may result violation of state or national laws, injury, or death. Always mount this device so
that it does not obstruct the driver’s view. Any fines, penalties, or damages resulting from improperly or
illegally operating this this device are not the responsibility of Alps Alpine Co., Ltd. or any of its affiliates,
subsidiaries, principals, officers, employees or shareholders.
• Do not operate or manipulate this device while driving, such as change settings, review footage, access
information, change the device location or angle, or otherwise manipulate this device while driving. Do not
allow this device to distract from safe driving.
• Do not mount this device where driver or passenger head impact is likely in the case of an accident,
including, but not limited to areas directly in front of the driver or passengers.
• It may be a violation of state or national laws to secure this device to a dash board or windshield. It is the
user’s responsibility to know and follow the applicable laws in the jurisdictions where this device is used.
• Do not use this device contrary to the instructions in this manual or contrary to national and state laws.
• It may be a violation of state or national laws to video or audio record someone with this device without
their consent. This may include audio recording a passenger in your vehicle without his or her consent. It
is the user’s responsibility to know and follow the applicable laws in the jurisdictions where this device is
used.
• Publishing the recordings made with this device on social media or other places on the internet without
consent of those in the recordings may violate state or national privacy laws. It is the user’s responsibility
to know and follow the applicable laws in the jurisdictions where this device is used.
• This product uses lithium batteries. For your safety, do not overcharge this device. Do not leave this device
plugged in when the vehicle is not turned off. Do not leave this device in extreme temperatures. Damaged,
overcharged, or misused lithium batteries can explode or otherwise cause fire. Failure to heed these
warning may result in injury or death.
8
1. Product overview
1.1 Included items
Ensure that all the items are included when you open the product box.
• The standard items may change without prior notice.
• GPS reception may be affected by interference from the vehicle's windshield, particularly those treated
with anti-UV protective coating, or built-in defroster.
1.1.1 DVR-C310R (2 camera, USA/Canada only)
Front camera (main unit) Rear camera Mount Hardwiring cable
NOW ON
Car charger
Quick start guide /
User guide / Warranty /
Registration card
(stored in the microSD card)
microSD card with adapter
(consumable)
Dash cam recording
warning sticker
Cable clamp holder Rear camera cable Rear camera extension
cable Rear camera connection
cable
External GPS receiver
Product overview
9
1.1.2 DVR-C310S (1 camera)
Front camera (main unit) Mount Hardwiring cable microSD card with adapter
(consumable)
NOW ON
Quick start guide /
User guide
(stored in the microSD card)
Cable clamp holder Dash cam recording
warning sticker External GPS receiver
Car charger
1.1.3 RVC-C310 (Rear view only)
Rear camera Rear camera cable Rear camera extension
cable
Rear camera connection
cable
Cable clamp holder
Product overview
10
1.2 Part names
1.2.1 Front camera (main unit) - front view
C-IN power port
sed to connect the
ower cable.
PS port
sed to connect the
xternal GPS receiver.
IN input port
sed to connect the
rear camera.
Speaker
Outputs the voice guide and buzzer
sounds to indicate the product’s status.
Front camera lens
Records the front view.
Mount connector
Used to connect the mount.
1.2.2 Front camera (main unit) - rear view
i-Fi button
ress to connect the product to a
martphone via Wi-Fi network.
eset button
Insert the tip of a sharp
object to reset the product
when an error occurs.
STATUS LE
Indicates the
recording status.
Wi-Fi LE
Indicates the Wi-
connection statu
Microphone
Used for voice recording.
Memory card slot
Insert a memory card to save recordings.
REC button
• Short press: Starts manual recording
• Press and hold for 3 seconds: Audio recording ON/OFF
• Press and hold for 5 seconds: Memory card format
Product overview
11
1.2.3 Rear camera (RVC-C310)
Adhesive mount
Used to fix the rear camera in the vehicle.
camera lens
Records the rear view.
onnection port
sed to connect the rear
camera to the front camera
using a rear camera cable.
1.3 Removing and inserting the memory card
Follow the instructions to remove the memory card from the product or to insert the memory card into the
product.
Before removing the memory card, ensure that the
product is turned off. Gently push the bottom of the
memory card with your fingernail to release it, and
then remove it from the product.
To insert the memory card into the memory card slot,
ensure that the metal contacts on the memory card
are facing toward the product’s buttons, and insert it
into the slot until you hear a click.
• Ensure that the product is turned off before removing the memory card. The recorded video files may be
corrupted or lost if you remove the memory card while the product is on.
• Ensure that the memory card is in the correct direction before inserting it into the product. The memory
card slot or the memory card may be damaged if it is inserted incorrectly.
• Use only authentic memory cards from Alpine. Alpine does not guarantee the compatibility and normal
operation of third-party memory cards.
To prevent loss of recorded video files, periodically back up the video files on a separate storage device.
Product overview
12
1.4 Overviewing connection diagram
Follow the connection diagram to properly install the product.
The connection diagram is for reference only. The product must be professionally installed in the vehicle by
an Alpine authorized dealer/a trained specialist mechanic.
1.4.1 2 Camera connection diagram (DVR-C310R / RVC-C310)
Rear camera
Rear camera
connection cable
Rear camera
connection cable
Hardwiring cable
External GPS
receiver
Rear camera
cable
BATTERY
ACC
GND
Yellow
Red
Black
Product overview
13
1.4.2 1 Camera connection diagram (DVR-C310S)
Hardwiring cable
External GPS receiver
BATTERY
ACC
GND
Yellow
Red
Black
1.4.3 Car charger connection diagram
Car charger
cable
Car charger
14
2. Installing the product
2.1 Installing the front camera (main unit)
Follow the instructions to properly install the product.
2.1.1 Selecting an installation location
Select an installation location that can record the
entire view in front of the vehicle without obstructing
the driver’s vision. Ensure that the front camera lens
is located in around the center of the windshield.
Keep it as far away as possible from other antennas.
Should not be installed on vehicle equipped with
front radar or front camera ADAS systems.
20 cm
If a GPS navigating device is installed on the dashboard,
its GPS reception may be affected depending on the
dashboard camera's installation location.
Adjust the installation location of the GPS navigating
device to ensure that the two devices are separated by
at least 20 centimeters (approximately 8 inches).
2.1.2 Securing the product
Follow the instructions to secure the product at the installation location.
1
2
1
➊
➊
➊
➊➊
➋
➋
➋
➋➋
Align the mount to the mount rail on the product,
and then slide it until you hear a click (
➊
➊
➊
➊➊
). Then,
carefully remove the protective film (
➋
➋
➋
➋➋
).
2
After determining the installation location, wipe the installation location on the windshield with a dry
cloth.
Installing the product
15
3
2
1
➊
➊
➊
➊➊➋
➋
➋
➋➋
Remove the protective film from the adhesive mount,
and then press the mount to the installation location.
4
2
1
➊
➊
➊
➊➊➋
➋
➋
➋➋
Remove the product from the mount and push the
mount against the windshield to ensure that the
mount is firmly fixed.
5
Align the product to the mount, and then slide it into
the locking position until you hear a click.
• The product may fall and be damaged during vehicle operation if it is not firmly fixed to the mount.
• If you need to remove the mount from the windshield to alter the installation location, be careful not
to damage the windshield’s film coat.
6
Set the vertical angle of the camera appropriately
and tighten the screw of the mount firmly.
To confirm the camera angle, record a video after installation and check the video using the mobile
viewer or the PC viewer. If necessary, adjust the camera angle again. For more information about the
mobile viewer or the PC viewer, refer to "4. Using the mobile viewer" or "5. Using the PC viewer".
Installing the product
16
2.1.3 Connecting the power cable with the car charger
When the engine and electrical accessories are turned off, connect the car charger.
2
1
➊
➊
➊
➊➊
➋
➋
➋
➋➋
Connect the cigar socket power cable to the product’s
DC-IN power connector and insert the cigar jack into the
vehicle’s power socket.
The location and specifications of the power socket
may differ by vehicle make and model.
• Use an authentic cigar socket power cable. If you use another manufacturer's cable, the product may be
damaged or electrical fire or electrocution may result due to the voltage difference.
• Do not cut or modify the power cable yourself. Doing so may damage the product or the vehicle.
• For safe driving, arrange the cables to prevent the driver's vision from being obstructed or interfering with
driving.
2.2 Installing the rear camera
Refer to the following instructions to properly install the rear camera.
2.2.1 Selecting an installation location
Select a location on the rear windshield where there
is no defrost grid wire and the camera can record
the entire rear view.
• For vehicles with a sunshade attached to the rear windshield, select a location where using the sunshade
will not interfere with camera operation.
• The adhesive part of the rear camera should not touch the defrost grid.
Installing the product
17
2.2.2 Securing the rear camera
Refer to the following instructions to secure the product to the installation location.
1
After determining the installation location, wipe the installation surface of the windshield with a dry
cloth.
Check the installation location before you secure the rear camera to the rear windshield. After
securing the rear camera to the windshield, it is hard to remove the camera or change the installation
location due to the strong adhesive.
2
1
2
➊
➊
➊
➊➊
➋
➋
➋
➋➋
Remove the protective film from the adhesive mount
and camera lens.
Before attaching the rear camera, check the
position of the lens. The label should beTOP
above the lens.
3
Attach the product with the Alpine logo facing inside
the vehicle and press the adhesive tape firmly to
secure the camera.
If the product is installed in reverse, the rear
view will be recorded upside down.
4
Adjust the camera's vertical angle.
Produkt Specifikationer
| Mærke: | Alpine |
| Kategori: | dashcam |
| Model: | RVC-C310 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Alpine RVC-C310 stil et spørgsmål nedenfor, og andre brugere vil svare dig
dashcam Alpine Manualer
12 Januar 2025
8 Oktober 2024
31 Juli 2024
26 Juli 2024
22 Juli 2024
20 Juli 2024
dashcam Manualer
- dashcam Toyota
- dashcam Denver
- dashcam Philips
- dashcam Pioneer
- dashcam Kenwood
- dashcam Technaxx
- dashcam HP
- dashcam Waeco
- dashcam Garmin
- dashcam Thinkware
- dashcam Asus
- dashcam Pyle
- dashcam Tracer
- dashcam Trevi
- dashcam Dometic
- dashcam Mio
- dashcam Blaupunkt
- dashcam JVC
- dashcam Uniden
- dashcam König
- dashcam Osram
- dashcam Gembird
- dashcam Maginon
- dashcam Navman
- dashcam Jensen
- dashcam Rollei
- dashcam Dymond
- dashcam Pro User
- dashcam Niceboy
- dashcam Cobra
- dashcam Xblitz
- dashcam Mini
- dashcam Salora
- dashcam Nextbase
- dashcam Lamax
- dashcam Overmax
- dashcam Midland
- dashcam Hikvision
- dashcam ION
- dashcam Trebs
- dashcam Navitel
- dashcam Transcend
- dashcam Caliber
- dashcam Metra
- dashcam Evolveo
- dashcam Clarion
- dashcam Genius
- dashcam IRoad
- dashcam Audiovox
- dashcam CRUX
- dashcam Nordväl
- dashcam Scosche
- dashcam Prestigio
- dashcam Boss
- dashcam Kogan
- dashcam ADATA
- dashcam AZDome
- dashcam Media-Tech
- dashcam Brigmton
- dashcam Ednet
- dashcam Laser
- dashcam Naxa
- dashcam Boyo
- dashcam Jobo
- dashcam Cowon
- dashcam Guardo
- dashcam Roadeyes
- dashcam Kaiser Baas
- dashcam Escort
- dashcam Braun Phototechnik
- dashcam BlackVue
- dashcam Innovv
- dashcam Carmera
- dashcam Skytronic
- dashcam Lidl
- dashcam VIOFO
- dashcam DOD
- dashcam CamOne
- dashcam Mobileye
- dashcam Blow
- dashcam Kapture
- dashcam ProUser
- dashcam Nanocam+
- dashcam Vicovation
- dashcam EchoMaster
- dashcam Andatech
- dashcam Rexing
- dashcam RIPOON
Nyeste dashcam Manualer
19 Februar 2025
14 Januar 2025
14 Januar 2025
13 Januar 2025
11 Januar 2025
11 Januar 2025
7 Januar 2025
5 Januar 2025
5 Januar 2025
4 Januar 2025