AMX Modero MSD-431-L Manual

AMX Joystick Modero MSD-431-L

Læs gratis den danske manual til AMX Modero MSD-431-L (2 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om AMX Modero MSD-431-L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Start Guide

MSD-431-L 4.3” Modero S Series

Wall Mount Touch Panel

Overview

The Modero S Series

is a touch panel family sophisticated enough for room

control yet priced right for the most cost sensitive installations, including small

huddle spaces and dedicated room scheduling. The smallest of our Modero S

Series wall mount touch panels, the MSD-431-L 4.3” Wall/Flush Mount Touch

Panel (FG2265-03) still features the advanced technology empowering users to

conduct seamless meetings including VoIP, brilliant 24-bit color depth, PoE

connectivity, and streaming video.

Product Specifications

Note: Optimal performance requires use of one of the following AMX PoE power

supplies (not included):

• PS-POE-AF-TC, PoE Injector, 802.3AF Compliant (FG423-83)

• NXA-ENET8-2POE, Gigabit PoE Ethernet Switch (FG2178-63)

Note: AMX does not support the use of non-AMX power supplies.

Note: For more information on installation and configuration, as well as

complete specifications on this device, please refer to the MSD-431-L/MST-431

Operation/Reference Guide, available at www.amx.com.

Panel Connectors and Wiring

FIG. 1 shows the connectors located on the back of the MSD-431-L.

Power for the MSD-431-L via Power Over Ethernet

Power for the MSD-431-L is supplied via Power Over Ethernet (PoE), utilizing an

AMX-certified PoE injector such as the PS-POE-AF-TC PoE Injector

(FG423-83) or other approved AMX PoE power source. The incoming Ethernet

cable should be connected to the RJ-45 port on the MSD-431-L.

Note: The Micro A/B USB port is used only for firmware uploads, as it is

inaccessible when the device is installed within its back box.

Installing the MSD-431-L

The MSD-431-L can be installed either directly into a solid surface environment,

using either solid surface screws or the included locking tabs for different

mounting options. For more information, please refer to the MSD-431-L/MST-

431 Operation/Reference Guide, available at www.amx.com.

The MSD-431-L is contained within a clear outer housing known as the back

box. This back box is removed when installing the device into a wall or into a

Rough-In Box.

Installing the MSD-431-L into a wall

The back box (FIG. 2) is designed to attach the panel to most standard wall and

solid surface materials. This back box has two locking tabs (one on the top and

one at the bottom) to help lock the back box to the wall. These locking tabs are

only extended AFTER the back box is inserted into the wall. Using the locking

tabs is highly recommended for standard mounting surfaces such as walls. For

thin walls and solid surfaces, use #4 mounting screws (not included).

WARNING: When installing the back box, make sure that the assembly is in the

correct position and in the correct place. Once the locking tabs are extended

and locked into place, removing the back box may be difficult without having

access to the back of the wall or causing damage to the wall.

Note: In order to guarantee a stable installation of the MSD-431-L, the thickness

of the wall material must be a minimum of .50 inches (1.27cm) and a maximum

of .875 inches (2.22cm). The surface should also be smooth and flat.

WARNING: The maximum recommended torque to screw in the locking tabs on

the plastic back box is 5 IN-LB [56 N-CM]. Applying excessive torque while

tightening the tab screws, such as with powered screwdrivers, can strip out the

locking tabs or damage the plastic back box.

1. After ensuring proper placement, cut out the mounting surface. Use the

included mounting template (68-2265-01) or refer to the dimensions in the

MSD-431-L/MST-431 Operation/Reference Guide, available from

www.amx.com, for more information.

CAUTION: Making sure the actual cutout opening is slightly smaller than the

provided dimensions is highly recommended. This action provides the installer

with a margin for error if the opening needs to be expanded. Too little wall

material removed is always better than too much.

2. Remove either the top or the bottom knockout from the back box,

depending upon the required installation. Thread the incoming wiring

through the hole in the rear of the back box.

FIG. 1 MSD-431-L

MSD-431-L Specifications

Power: PoE (Power over Ethernet), 802.3af, class 2

Power Consumption: • Maximum: 5W

• Typical: 3W

• Standby: 2W

• Shutdown: 0.6W

• Startup Inrush Current: Not Applicable due to PoE

standard

Operating Environment: • Operating Temperature: 32° F to 104° F (0° C to 40° C)

• Storage Temperature: 4° F to 140° F (-20° C to 60° C)

• Humidity Operating: 20% to 85% RH

• Humidity Storage: 5% to 85% RH

• Power (“Heat”) Dissipation: 13.6 BTU/hr,

Standby: 6.8 BTU/hr

Dimensions (HWD):

With Back Box: 3.42” x 5.05” x 2.30”

(87 mm x 128 mm x 58 mm)

Weight:

• Without Back Box: 0.50 lbs (0.22 Kg)

• With Back Box: 0.65 lbs (0.29 Kg)

Certifications: • UL

• FCC Part 15 Class B

• C-Tick CISPR 22 Class B

• CE EN 55022 Class B and EN 55024

• CE EN 60950-1

• IC CISPR 22 Class B

• VCCI CISPR 22 Class B

• RoHS/WEEE compliant

Included Accessories: • MSD-431-L Wall Mounting Template (68-2265-01)

Microphone

(Front)

(Rear)

RJ-45

Port

RJ-45

Port

Sleep Button

Micro A/B

USB Port

Right LED

Left LED

FIG. 2 MSD-431-L Back Box (Side View)

Knockout

MSD-431-L

Back

Box

Locking

Tab

Knockout

Produkt Specifikationer

Mærke:	AMX
Kategori:	Joystick
Model:	Modero MSD-431-L

Har du brug for hjælp?

Hvis du har brug for hjælp til AMX Modero MSD-431-L stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Joystick AMX Manualer

AMX Modero MSD-431-L Manual

15 September 2025

14 September 2025

14 September 2025

14 September 2025

14 September 2025

AMX Modero NXD-430 Manual

14 September 2025

AMX NetLinx NX-2200 Manual

14 September 2025

AMX RMBK-1001 Manual

14 September 2025

AMX Modero MST-701 Manual

14 September 2025

AMX NetLinx NX-3200 Manual

14 September 2025

Joystick Manualer

Nyeste Joystick Manualer

Brook Ras1ution 2 Manual

3 November 2025

Dahua Technology EVS7048S-R Manual

27 Oktober 2025

Thrustmaster eSwap X Manual

19 Oktober 2025

Thrustmaster T3PA Add-On Manual

19 Oktober 2025

8BitDo Ultimate Wired Controller Xbox Manual

16 Oktober 2025

13 Oktober 2025

13 Oktober 2025

13 Oktober 2025

13 Oktober 2025

13 Oktober 2025