01 EN EN 02
Charging
• Slide to open or close the charging case to activate the LED battery indicator.
• Fully charge both the earbuds and the charging case before the rst-time using.
• To preserve battery lifespan, fully charge at least once every 45 days.
• To prevent damage, use the provided USB-C cable.
• You can charge the charging case by using a certied wireless charger (not provided).
• Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
Powering On/Off
Slide to open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will
automatically power off.
2
1
OFF
ON
LED behavior (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
• To manually power on, press and hold the multi-function button on either one of earbuds
for 1 second.
• To manually power off, press and hold the multi-function button on either one of earbuds
for 5 seconds.
Pairing
True Wireless Stereo Connection
Slide to open the charging case, the earbuds will automatically power on. The right earbud will
automatically connect with the left earbud.
LED behavior (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
2
1
3
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
LED behavior (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
• In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen popped up. Don’t worry and it will not inuence the using.
• Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
