Anthro Fit Adjusta Manual

Anthro Bureau Fit Adjusta

Læs gratis den danske manual til Anthro Fit Adjusta (4 sider) i kategorien Bureau. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Anthro Fit Adjusta, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Questions? 1-800-325-3841

Thank you for buying our Products!

Please return the enclosed Registration Card to receive our product

updates, new catalogs, and sale ﬂyers.

Anthro Corporation Technology Furniture®

10450 SW Manhasset Drive

Tualatin, Oregon 97062

anthro.com

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com

SAVE THESE INSTRUCTIONS! Rev. C January 2006

Hello! Thank you for choosing Anthro.

Before beginning assembly of your Adjusta Unit, take a moment to review the parts listed on the next page

to verify that your shipment is complete. Please review the assembly instructions of all Anthro products you

purchased and are planning to include in this installation, prior to beginning this assembly.

30”/36”/48” wide Adjusta Unit

Assembly Instructions

1-800-325-3841

To make the assembly of your Adjusta Unit even easier, we have included all of the required tools. The handy

Hex Driver Bit can be used in your electric drill in place of the Hex Driver. Your Adjusta Unit is heavy! A second

person will make this assembly procedure much easier.

Hex Driver 5/32” ............................................................ 375-5000-00

Hex Driver Bit 5/32” ..................................................... 375-5003-00

Hex Key 5/32” ................................................................. 375-5016-00

Hex Key 3/16” ................................................................. 375-5028-00

3-Way Wrench ............................................................. 225-5196-03

8 oz. Rubber Mallet ..................................................... 375-5022-00

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062 1-800-325-3841 anthro.com

01–ﬁt Adjusta Fixed Worksurface Qty. 1 ....................... (see below)

30” Wide Fixed Worksurface (FAJ30zz/xx3) ....100-6454-00

36” Wide Fixed Worksurface (FAJ36zz/xx3) ....100-6455-00

48” Wide Fixed Worksurface (FAJ48zz/xx3) ....100-6456-00

02–ﬁt Adjusta Caddy Worksurface Qty. 1 ....................... (see below)

30” Wide Caddy Worksurface (FAJ30zz/xx3)..100-6458-00

36” Wide Caddy Worksurface (FAJ36zz/xx3) ..100-6459-00

48” Wide Caddy Worksurface (FAJ48zz/xx3) ..100-6460-00

03– Adjusta Mechanismﬁt ...............Qty. 1 ....................... (see below)

(The Adjusta Mechanism is packaged separately & requires assembly)

30” Wide Adjusta Mechanism (FAJ30zz/xx3) ...225-5545-00

36” Wide Adjusta Mechanism (FAJ36zz/xx3) ...225-5546-00

48” Wide Adjusta Mechanism (FAJ48zz/xx3) ...225-5547-00

04– Small Support Bracket X .............Qty. 1 ...................225-2014-00

05– 24.875” Vertical Legs .................Qty. 4 ...................125-5230-00

06– Adjusta Base Tubes ......................Qty. 2 ..................125-5276-00

07– Cross Tubes ....................................Qty. 2 ....................... (see below)

30” Wide Cross Tube (FAJ30zz/xx3) ...................125-5219-00

36” Wide Cross Tube (FAJ36zz/xx3) ...................125-5220-00

48” Wide Cross Tube (FAJ48zz/xx3) ...................125-5214-00

08– Insert Screws .................................Qty. 4 ...................325-5052-00

09– 2.0” Large End Caps ...................Qty. 4 ...................175-5157-00

10– Caster Inserts ...............................Qty. 4 ...................525-5032-00

11– 3” Locking Casters ......................Qty. 2 ...................150-5053-00

12– 5/16-18 Boltsﬁt ..............................Qty. 8 ...................325-5194-00

13– Tube Washersﬁt .........................Qty. 8 ..225-2050-00 or 225-3522-00

14– 3” Non-Locking Casters ........... Qty. 2 ...................150-5052-00

15– 3/4” Wood Screws ........................Qty. 42 ................325-5106-00

16– Back Trough .................................... Qty. 1 ....................... (see below)

30” Wide Back Trough (F3029zz/xx3) ................225-2290-00

36” Wide Back Trough (F3629zz/xx3) ................225-2291-00

48” Wide Back Trough (F4829zz/xx3) ................225-2292-00

17– Support Screws ............................Qty. 8 ...................325-5010-00

18– Small Support Bracket Y ............Qty. 1 ...................225-2015-00

19– 1/4-20 Button Head Screws ......Qty. 4 ...................325-5003-00

20– 1.5” Small Caps .............................Qty. 4 ...................175-5156-00

All Fastener quantities listed here are the minimum needed

for your Adjusta Unit assembly. There may be a few extra

Fasteners included, which are not counted in the Parts List.

Component list for part #’s FAJ30zz/xx3, FAJ36zz/xx3 & FAJ48zz/xx3

NOTE: Detailed views of all Hardware are provided with each Assembly Step.

10 12

09 13 14

15 16

Step 12

Align the Base Assembly on the Vertical Tubes as shown.

Secure the Base Assembly by inserting a Bolt through a ﬁt

Tube Washer. Then insert the Bolt through the Base Tube

and carefully thread it into the Vertical Tubes.

Repeat for the remaining three Bolts and tighten all Bolts.

(5/16-18 X 3.5”) Boltﬁt

325-5194-00

ﬁt Tube Washer

225-2050-00 or 225-3522-00

Locking Casters

ﬁt Bolt

ﬁt Tube

Washer

1.5” Small

End Cap

Rotate Knobs

to adjust

Caddy angle.

Squeeze Paddle

to adjust Caddy height.

Step 13

Insert the four 1.5” Small End Caps into the Vertical Legs.

Congratulations! Your assembly is complete.

Please return the enclosed Registration Card to receive

our product updates, new catalogs, and sale ﬂyers.

Thank you for choosing Anthro!

Adjust the Caddy Worksurface height by:

1. Squeezing and holding the Paddle.

2. Reposition the Caddy to the desired location.

3. Release the Paddle.

Adjust the Caddy Worksurface angle by:

1. Rotating the Knobs counterclockwise.

2. Reposition the Caddy to the desired angle.

3. Rotate the Knobs clockwise.

Produkt Specifikationer

Mærke:	Anthro
Kategori:	Bureau
Model:	Fit Adjusta

Har du brug for hjælp?

Hvis du har brug for hjælp til Anthro Fit Adjusta stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bureau Anthro Manualer

Anthro Trolley Manual

29 August 2024

Anthro Elevate II Manual

29 August 2024

Anthro Security Cart Manual

29 August 2024

Anthro Fit Adjusta Unit Manual

29 August 2024

Anthro Large Carts Manual

29 August 2024

Anthro Steve's Station Advanced Manual

29 August 2024

Anthro Fit Console Unit Manual

29 August 2024

Anthro POC Cart Manual

29 August 2024

Anthro Elevate Single Surface Manual

29 August 2024

Anthro Zido cart Manual

29 August 2024

Bureau Manualer

Nyeste Bureau Manualer

Seville Classics OFF65992B Manual

1 April 2025

Safco 5273 Manual

29 Marts 2025

Safco 1951 Manual

29 Marts 2025

Safco 5272 Manual

29 Marts 2025

Ikea ALEX 805.888.88 Manual

12 Marts 2025

Ikea ALEX 605.485.20 Manual

13 Februar 2025

Ikea GLADHÖJDEN 304.939.39 Manual

13 Februar 2025

Ikea HAUGA 904.776.77 Manual

13 Februar 2025

Ikea KJELLARNE 406.136.77 Manual

13 Februar 2025

Ikea GLADHÖJDEN 205.508.31 Manual

13 Februar 2025