Arcam FMJ P1 Manual

Arcam Modtager FMJ P1

Læs gratis den danske manual til Arcam FMJ P1 (17 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Arcam FMJ P1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/17
Pre Amplifier C30
Power Amplifier P35
Power Amplifier P1
Préamplicateur C30
Amplicateur de Puissance P35
Amplicateur de Puissance P1
Vorverstärker C30
Vollverstärker P35
Vollverstärker P1
22
Safety guidelines
CAUTION: To reduce the risk of electric shock, do not remove cover
(or back). No user serviceable parts inside. Refer servicing to qualified
service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
‘dangerous voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
CAUTION: In Canada and the USA, to prevent electric shock, match
the wide blade of the plug to the wide slot in the socket and insert the
plug fully into the socket.
IMPORTANT SAFETY INSTRUCTIONS
This product is designed and manufactured to meet strict quality
and safety standards. However, you should be aware of the following
installation and operation precautions:
1. Take heed of warnings and instructions
You should read all the safety and operating instructions before
operating this appliance. Retain this handbook for future reference and
adhere to all warnings in the handbook or on the appliance.
2. Water and moisture
The presence of electricity near water can be dangerous. Do not use
the appliance near water – for example next to a bathtub, washbowl,
kitchen sink, in a wet basement or near a swimming pool, etc.
3. Object or liquid entry
Take care that objects do not fall and liquids are not spilled into the
enclosure through any openings. Liquid filled objects such as vases
should not be placed on the equipment.
4. Ventilation
Do not place the equipment on a bed, sofa, rug or similar soft surface, or
in an enclosed bookcase or cabinet, since ventilation may be impeded.
We recommend a minimum distance of 50mm (2 inches) around the
sides and top of the appliance to provide adequate ventilation.
5. Heat
Locate the appliance away from naked flames or heat producing
equipment such as radiators, stoves or other appliances (including
other amplifiers) that produce heat.
6. Climate
The appliance has been designed for use in moderate climates.
7. Racks and stands
Only use a rack or stand that is recommended for use with audio
equipment. If the equipment is on a portable rack it should be moved
with great care, to avoid overturning the combination.
8. Cleaning
Unplug the unit from the mains supply before cleaning.
The case should normally only require a wipe with a soft, damp, lint-
free cloth. Do not use paint thinners or other chemical solvents for
cleaning.
We do not advise the use of furniture cleaning sprays or polishes as
they can cause indelible white marks if the unit is subsequently wiped
with a damp cloth.
9. Power sources
Only connect the appliance to a power supply of the type described in
the operating instructions or as marked on the appliance.
10. Power-cord protection
Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords and plugs, and the point where they exit
from the appliance.
11. Grounding
Ensure that the grounding means of the appliance is not defeated.
12. Power lines
Locate any outdoor antenna/aerial away from power lines.
13. Non-use periods
If the unit has a standby function, a small amount of current will continue
to flow into the equipment in this mode. Unplug the power cord of the
appliance from the outlet if left unused for a long period of time.
14. Abnormal smell
If an abnormal smell or smoke is detected from the appliance, turn
the power off immediately and unplug the unit from the wall outlet.
Contact your dealer immediately.
15. Servicing
You should not attempt to service the appliance beyond that described
in this handbook. All other servicing should be referred to qualified
service personnel.
16. Damage requiring service
The appliance should be serviced by qualified service personnel when:
A. the power-supply cord or the plug has been damaged, or
B. objects have fallen, or liquid has spilled into the appliance, or
C. the appliance has been exposed to rain, or
D. the appliance does not appear to operate normally or exhibits a
marked change in performance, or
E. the appliance has been dropped or the enclosure damaged.
SAFETY COMPLIANCE
This product has been designed to meet the IEC 60065 international
electrical safety standard.
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ATTENTIONCAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN

Produkt Specifikationer

Mærke: Arcam
Kategori: Modtager
Model: FMJ P1

Har du brug for hjælp?

Hvis du har brug for hjælp til Arcam FMJ P1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Arcam Manualer

Arcam

Arcam A5 Manual

29 August 2024
Arcam

Arcam A25 Manual

28 August 2024
Arcam

Arcam A15 Manual

28 August 2024
Arcam

Arcam AVR300 Manual

16 August 2024
Arcam

Arcam FMJ C30 Manual

15 August 2024
Arcam

Arcam P1000 Manual

14 August 2024
Arcam

Arcam SA20 Manual

14 August 2024
Arcam

Arcam P429 Manual

14 August 2024
Arcam

Arcam Solo Neo Manual

14 August 2024
Arcam

Arcam AVR200 Manual

12 August 2024

Modtager Manualer

Nyeste Modtager Manualer

DS18

DS18 GEN-X G8400.4D Manual

17 Juni 2025
Hifonics

Hifonics Zeus Expansion ZXR750/1E Manual

17 Juni 2025
Futaba

Futaba R7206 SB Manual

16 Juni 2025
DS18

DS18 FRP-3.5K Manual

16 Juni 2025
DS18

DS18 SMD-300.4AB Manual

16 Juni 2025
DS18

DS18 SMD-3000.1D Manual

16 Juni 2025
DS18

DS18 GEN-X G3600.1D Manual

16 Juni 2025
DS18

DS18 HYDRO NXL-X1000.1D Manual

16 Juni 2025
DS18

DS18 SMD-200.4AB Manual

16 Juni 2025
DS18

DS18 GEN-X G1000.4D Manual

16 Juni 2025