Arcam Solo Neo Manual

Arcam Modtager Solo Neo

Læs gratis den danske manual til Arcam Solo Neo (88 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Arcam Solo Neo, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/88

safety

guidelines

Important safety instructions

This product is designed and manufactured to meet

strict quality and safety standards. However, you

should be aware of the following installation and

operation precautions.

1. Follow all instructions

You should read all the safety and operating

instructions before operating this equipment. Retain

this handbook for future reference and adhere to all

warnings in the handbook or on the equipment.

2. Water and moisture

The presence of electricity near water can be

dangerous. Do not use the equipment near water – for

example next to a bathtub, washbowl, kitchen sink, in

a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not

spilled into the enclosure through any openings.

Liquid-lled objects such as vases should not be

placed on the equipment.

4. Liing and placing the equipment

This amplier weighs 7.9kg, so take care when lifting

or moving this unit.

Only use a rack or shelf that is stable and strong

enough to support the weight of this equipment.

5. Ventilation

Do not place the equipment on a bed, sofa, rug or

similar soft surface, or in an enclosed bookcase or

cabinet, since ventilation may be impeded.

Keep a minimum of 5cm (2 inches) clear around the

apparatus to allow sucient passage of air.

6. Heat

Locate the equipment away from naked ames or

heat-producing appliances such as radiators, stoves or

other appliances that produce heat.

7. Climate

The equipment has been designed for use in

moderate climates and in domestic situations. Unplug

this equipment during lightning storms to prevent

possible damage from a strike or mains surge.

8. Cleaning

Unplug the unit from the mains supply before

cleaning.

The case should normally only require a wipe with a

soft, lint-free cloth. Do not use chemical solvents for

cleaning.

We do not advise the use of furniture cleaning sprays

or polishes as they can cause permanent white marks.

9. Grounding

Ensure that the unit is grounded (‘earthed’) properly

at all times

10. Power sources

Only connect the equipment to a power supply of

the type described in the operating instructions or as

marked on the equipment.

The primary method of isolating the equipment from

the mains supply is to remove the mains plug. The

equipment must be installed in a manner that makes

disconnection possible.

11. Power-cord protection

Power supply cords should be routed so that they are

not likely to be walked on or pinched by items placed

upon or against them. Pay particular attention to the

point where they exit from the equipment.

12. Non-use periods

If the equipment is not being used for an extended

period, we recommend that you unplug the power

cord of the equipment from the outlet, to save power.

13. Abnormal smell

If an abnormal smell or smoke is detected from the

equipment, turn the power o immediately and

unplug the equipment from the wall outlet. Contact

your dealer and do not reconnect the equipment.

14. Servicing

You should not attempt to service the equipment.

Contact your dealer to arrange servicing.

15. Damage requiring service

The equipment should be serviced by qualied

service personnel when:

A. the power-supply cord or the plug has been

damaged, or

B. objects have fallen, or liquid has spilled into the

equipment, or

C. the equipment has been exposed to rain, or

D. the equipment does not appear to operate

normally or exhibits a marked change in

performance, or

E. the equipment has been dropped or the

enclosure damaged.

Safety compliance

This equipment has been designed to meet the IEC/

EN 60065 international electrical safety standard.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Many of these items are common sense precautions but, for your own safety and to ensure that you do not damage the unit, you must read them.

Warning

Mains plug/appliance coupler is used to disconnect

device and it shall remain readily operable.

CLASS I construction shall be connected to a MAINS

socket outlet with a protective earthing connection.

Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult

an electrician for replacement of the obsolete outlet.













CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer

servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the

presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket

and insert the plug fully into the socket.

Produkt Specifikationer

Mærke:	Arcam
Kategori:	Modtager
Model:	Solo Neo

Har du brug for hjælp?

Hvis du har brug for hjælp til Arcam Solo Neo stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Arcam Manualer

29 August 2024

28 August 2024

28 August 2024

16 August 2024

15 August 2024

14 August 2024

14 August 2024

14 August 2024

Arcam Solo Neo Manual

14 August 2024

Arcam AVR200 Manual

12 August 2024

Modtager Manualer

Nyeste Modtager Manualer

DS18 SMD-300.4AB Manual

16 Juni 2025

DS18 SMD-3000.1D Manual

16 Juni 2025

DS18 GEN-X G3600.1D Manual

16 Juni 2025

DS18 HYDRO NXL-X1000.1D Manual

16 Juni 2025

DS18 SMD-200.4AB Manual

16 Juni 2025

DS18 GEN-X G1000.4D Manual

16 Juni 2025

DS18 GEN-X G4000.5D Manual

16 Juni 2025

Diamond Audio MICRO85U Manual

16 Juni 2025

Planet Audio MB2000.1D Manual

16 Juni 2025

Planet Audio MB2200.5D Manual

16 Juni 2025