ART SCC Studio Control Center Project Series Manual

ART Ikke kategoriseret SCC Studio Control Center Project Series

Læs gratis den danske manual til ART SCC Studio Control Center Project Series (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om ART SCC Studio Control Center Project Series, eller vil du spørge andre brugere om produktet?

Side 1/12
SCC
Studio Control Center
Project S
Project S
Project S
Project SProject Series
eries
eries
erieseries
User's Manual
II
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and maintenance
dangerous voltage inside the enclosure. Voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment.
Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Only connect the unit to power of the type marked on the rear panel.
Power cord:
Use the power cord with the mains plug appropriate for your local mains supply as provided with the equipment. If the
provided plug does not fit into your outlet consult your service agent. Route the power cord so that it is not likely to be
walked on, stretched or pinched by items placed upon or against.
Ventilation:
Do not position the unit where the air required for ventilation is impeded. If the unit is to be operated in a rack, case or
other furniture, ensure that it is constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do
not place a container of liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit
away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and
smoke, especially that associated with smoke machines.
Handling:
To prevent damage to the controls and cosmetics avoid rough handling and excessive vibration. Protect the controls from
damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to yourself or damage to the
equipment take care when lifting, moving or carrying the unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen
into opening, or the power cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted.
Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user guide.


Produkt Specifikationer

Mærke: ART
Kategori: Ikke kategoriseret
Model: SCC Studio Control Center Project Series

Har du brug for hjælp?

Hvis du har brug for hjælp til ART SCC Studio Control Center Project Series stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret ART Manualer

ART

ART EQ341 Manual

14 Januar 2025
ART

ART 311 Manual

8 December 2024
ART

ART ProChannel II Manual

15 Oktober 2024
ART

ART Auto-Tune Pre Manual

23 September 2024
ART

ART Dual RDB Manual

20 September 2024
ART

ART Dual Tube EQ Manual

31 August 2024
ART

ART PD-3 Manual

31 August 2024
ART

ART Tube EQ Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer